Kailiwei 700W 220V BGA Station Electronic Soldering Digital Adjustable Hot Air Gun Station Table Rework Solder Maintenance Heat Gun

700W 220V BGA Station Electronic Soldering Digital Adjustable Hot Air Gun Station Table Rework Solder Maintenance Heat Gun

Characteristic:
1. Hot air repair table
2. Extremely low noise and space saving design
1. Digital PID technology enhances temperature stability
2. Easily adjust airflow and temperature control rotation
3. Automatically stop rotating when the temperature is lower than 4°C
5. Intelligent self-detection function, personal operation safety, automatic cooling function, effectively extend the heater life, protect the hot air gun
6.ESD design to protect sensitive components
7. International standard heater, easy to use and replace
8. High quality and durable
9. Plastic holder for heat gun


Application:
Unsolder multiple components such as SOIC, CHIP, QFP, PLCC, BGA and temperature sensitive components (especially flat cables and cable connectors);
Suitable for heat shrinkage, heating, paint removal, degumming, defrosting. Preheating and rubber welding, etc.

characteristic
(1) microcomputer control, preheating quickly, 3-5 seconds to reach the set temperature.
(2) Digital LED display, large power, stable temperature, breathable, brushless fan, long life, noise
Low (3) automatic cooling function, effectively extend the life of the heater, protect the hot air gun.
(4) Safely remove BGA-IC, keep the pin intact, more safe and reliable, blowing PCB will not bubble.
(5) mobile phone repair, laptop repair, circuit board and other essential products, suitable for multiple components, such as SOIC chip QFP PLCC and BGA, etc. (especially suitable for flat cables and cable connectors).
(6) Adjustable air volume, air volume is mild, convenient temperature control, can adapt to a variety of functions.

Note:
(1) Because the handle has a precision level sensor, when you pick up the handle and the nozzle of the tube is facing up, the airbrush will automatically enter the standby mode. When the temperature is lower than 100 ° C, the screen displays (--) that the device is in standby mode. When the temperature of the heating element is lower than 70°, the rotation will stop automatically to protect the life of the heat gun.
(2) The temperature at and around the outlet of the hot air repair platform is extremely high. Attention should be paid to prevent burns.
(3) The heating handle must be placed in the handle bracket, not on the workbench or other places.
(4) Please keep the socket unblocked without obstacles.
(5) After the work is completed, it must be placed on the heating rack of the handle, so that the machine will automatically cool down to below 70 (enter the standby state) and turn off the power switch.
(6) The minimum distance between the air and the object is 2 mm.
(7) According to the requirements of the job, use the appropriate nozzle first, then change the nozzle, the temperature may be slightly different.

Specification

Structure
1. Air gun
2. Air gun bracket
3. LED digital display
4. Work channel CH1 button
5. Work channel CH2 button
6. Work channel CH3 button 7. Temperature button
9. Temperature control knob
10. Power Plug