Orthopedic Plaster Saw Surgical Electric Gypsum Plaster Saw Operation Plaster Cutter saw

The basic surgical equipment can effectively cut all kinds of bandages High-speed saw blade vibration system
Will not scratch the skin for the blade rolls from left to right with the amplitude of 5.6
Electric plaster saw cut the plaster by swaying the saw. During the operation,it won't bring the scratch even the saw blade contact with patient's skin.Motor adopt the dual-insulation protecting device and it has assured the safety of both operator and patients
Applications:
1, Oscillating Frequency Is Greater Than 12500 Times / Minute. Oscillating Angle 5 Degrees.
2,Low Noise Optimization Design Of Mechanical Structure And Components.
3,Alloys Saw Long-Time Use.
4,Soft Tissue Protection Function, Safe And Reliable Use.
5,Suitable For All Types Of Plaster Bandage. Especially Suitable For All Types High Polymer Bandage.
6,Our plaster saw was used in demolishing the plaster bandages, orthopedic fixation and resetting.
Technical Details:
Power Voltage: 220V/50Hz 110V/60HZ
Output power: >20W
Rated Input Power:125W;
No-load speed : > 11000r/min
Noise ≤84dB
Class of insulation of motor: E class
How to use:
1,Grasp the electric plaster saw and cutting blade should be vertical on the casts surface and make stress slowly
2,when the material was cut through ,put up the saw blade slightly and more forward along the incision
3,repeat the above process until the material completely cut open
Including:
1. Motor
2. Circular saw blade
3. Fan-shaped saw blade.
4. Wrench.
5. Green.