- Product Details
- {{item.text}}
Quick Details
-
Voltage:
-
0-220V
-
Power:
-
1500W
-
Weight:
-
10KG
-
Dimension(L*W*H):
-
45*22*22CM
-
Certification:
-
CE
Quick Details
-
Place of Origin:
-
China
-
Brand Name:
-
ISSACMACHINE
-
Production Capacity:
-
100KG/H
-
Voltage:
-
0-220V
-
Power:
-
1500W
-
Weight:
-
10KG
-
Dimension(L*W*H):
-
45*22*22CM
-
Certification:
-
CE
Name: No. 32 split meat grinder
Material: cast iron
Features: Easy to clean, the feeding rod can be removed for cleaning without removing the pulley, and the rotating part is equipped with rolling bearings, which is durable.
Uses: Used in the kitchen for processing minced meat, grinding peppers, and vegetable stuffing.
Installation method: It can be directly fixed on the desktop or wooden board for manual use, or it can be used with a motor. This machine does not contain a motor. The size of the feet of the meat grinder is about 9.7 cm from center to center on one side, and the distance between two feet is about 12.5 cm from center to center. The total length of the machine is 32 cm, the height is 20 cm, the width of the opening is 15*13 cm, the narrowest part is about 7.8 cm, and the diameter of the big wheel is 25 cm. The machine comes with a small hole 8 mm or 10 mm meat plate and a knife, which can be twisted after taking it back. Need a link below the reamer point
1. When using the meat grinder, first wash the meat grinder with water, then install it as it is, and then use it after pressing the large gland. Note: (The notch of the circular cutting knife must be aligned with the protruding nail of the machine mouth, otherwise the round knife will rotate with the cross knife in the meat grinder, which will affect the meat yield).
2. Before use, fix the meat grinder on the chopping board or bench, and use the four fixed feet at the bottom of the meat grinder to screw the meat grinder to the chopping board or work surface.
3. The meat to be minced must not have bones, otherwise the reamer will be damaged. The meat to be minced should not be too large, otherwise it will get stuck.
4. After the machine is used up, be sure to disassemble it completely, wash it with clean water or hot water, and wipe it dry to avoid oxidation. The inside and outside of the machine body has been treated with oxygen, non-toxic and tasteless. But please be careful, never use salt water or other Chemical water is used for cleaning, otherwise the body will easily corrode and turn black .