- Product Details
- {{item.text}}
Quick Details
-
Certificate:
-
FDA
-
Hardness:
-
0 Shore A°
-
Mixing ratio:
-
1:1
-
Sample:
-
free silicone sample
-
Viscosity:
-
2000+/-1000
-
MOQ:
-
1KG
-
Tensile strength (Mpa):
-
30 kgf /cm2
-
Package:
-
5kg/drum,25kg/drum,200kg/drum
-
Application:
-
Toys Making
-
Item:
-
Medical Grade Liquid Silicone Rubber
Quick Details
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
Hong Ye Silicone Rubber
-
Model Number:
-
E600
-
Certificate:
-
FDA
-
Hardness:
-
0 Shore A°
-
Mixing ratio:
-
1:1
-
Sample:
-
free silicone sample
-
Viscosity:
-
2000+/-1000
-
MOQ:
-
1KG
-
Tensile strength (Mpa):
-
30 kgf /cm2
-
Package:
-
5kg/drum,25kg/drum,200kg/drum
-
Application:
-
Toys Making
-
Item:
-
Medical Grade Liquid Silicone Rubber
Silicone for Life Casting is two component addition cure heating or room temperature vulcanizing silicone rubber. The product, which is colorless or skin-colored oily liquid and becomes soft elastic material after vulcanization , can be used for making soft silicone rubber products like human body shape , breast pad making, bra pads, silicone breast and prosthesis, shoulder pads, patchs, anti slip mat, and also can be used for pouring material for electronic and electrical parts.
FDA liquid silicone Silicone Fake Breast products can be made of flexible silicone rubber products, such as sex products, body shape, body parts, body shape, chest pad, shoulder pads, patch, anti-skid pad , but also for the simulation of human facial silicone mold is mainly used for human face imitation of human body shape , because it is food grade, can be used to produce food mold, high-grade silicone products.
*Excellent electrical properties and chemical stability, nontoxic and odorless
*Good tensile and tear strength
*Semi-transparent, oily liquid, curing soft elastic material.
*FDA certified, medical grade, totally nontoxic, odorless, harmless, and eco friendly
*Resistance to weathering, non-corrosive,low linear shrinkage, the same type, shape change, easy operation
* long-term use and to maintain its soft elastic properties.
Step 1: Take 100 G part A and 100 G part B and mix them evenly.
*Notes: Addition cure mold making silicon rubber is two part flowing liquid , Pls follow the step strictly:
1.Weigh the two part exactly by electronic weight..
If any part not in exactly weight , it may cause changing of hardness , or even cause uncure problem.
2.Mix part A and part B evenly.
Otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. What’s more, the finished molds will meet a short life. All of these will cause a waste of silicon rubber.
Step 2: Vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
Step 3: Cleaning the mold
Clean your mold and brush a layer of release agent(detergent or soap water) on your it.
Step 4: Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
5kg/can, 20 kg/drum, or 200 kg/drum.
silicone rubber ,liquid silicone rubber ,silicone rubber for life casting ,life casting silicone rubberv ,silicone rubber for sex dolls
Contact Melantha to get free sample at:
Email:hyjhqq@szrl(dot)net
Whatsapp & Skype:+86 189 3886 7549
Silicone rubber,liquid silicone rubber ,rtv silicone rubber ,htv silicone rubber ,silicone rubber for mold making ,silicone rubbe r to make mold,life casting silicone rubber,molding silicone rubber ,mold making silicone rubber ,silicone rubber for shoe mold making ,silicone rubber fro life casting
