JS14A digital timer timer relay timing relay time-delay sensor switch 220V

JS14A digital timer  timer relay timing relay time-delay sensor switch 220V

Technical features:

1. Supply voltage: AC (50Hz)36V, 110V, 127V, 220V, 380V; DC: 12V, 24V (other voltages can be customized);

2. Delaying specification: 1s, 5s, 10s, 30s, 60s, 120s, 180s, 240s, 300s, 600s, 900s, 1200s, 1800s,  3600s;

3. Electrical life: ≥ 10 × 104 times;

4. Mechanical life: ≥ 100 × 104 times;

5. Contact capacity: AC250V 5A ;

6. Use the Class: AC-15 DC-13;

7. Repeated the error: "1%;

8. Reset time: ≤ 1 sec;

9. Power consumption: ≤ 1.5W (DH11S ≤ 3W).

installation condition:

1, using the environment: the installation site is not more than 2000 meters above sea level; the  ambient air temperature does not exceed +40. C, and its average temperature within 24h does  not exceed +35. C, ambient air temperature of the lower limit of -5. C; the maximum temperature  is +40. C, air relative humidity of not more than 50%; at a lower temperature +20. C, allowing the  relative humidity of air no more than 90%. Occasionally, due to temperature changes of the  condensation produced by special measures to be taken;

2, power supply voltage range of 85% -110% of rated voltage;

3, in the absence of severe shock and blast the media, and media not sufficient to corrode metal  and damage insulation of gas and dust, rain and snow erosion in areas that are not used;

4, vertical or horizontal installation.

Working power:	DC24V;AC24V,220V,380V
Delay range:	1s,6s,10s,30s,60s,120s, 180s,300s,600s,900s, 1200s,1800s,3600s;
Repeat error:	≤1%
Operating mode:	JS14A, JS20 power-on delay JS20/03; power-on delay with momentary motion JS14A-Y; delay-conversion JS20D power failure delay
Contact form:	JS14A, JS20, JS20D two sets of delay JS20/03 group delays a group of momentary motion
Contact container:	3A AC220V (resistive)
Dimensions:	82×45×120mm
Hole Size:	56-2×φ4.5mm
Installation method:	Device type or 35mm rail