Explore More Products
- Product Details
- {{item.text}}
Quick Details
-
Brand Name:
-
Kafuter
-
Model Number:
-
5911B
-
Type:
-
Sealant
-
Appearance:
-
GREY/BLACK paste
-
temperature range:
-
-60~200 degree
-
Packing:
-
100g/pcs
-
Appilcation:
-
Sealing
-
Product name:
-
Silicone Sealant Glue
-
Material:
-
100% Silicone
-
Color:
-
Black
-
Keywords:
-
Sealing headlight
-
Feature:
-
Bonding Strength
-
Advantage:
-
Strong Adhestion
Quick Details
-
CAS No.:
-
63148-60-7
-
Other Names:
-
Silicone Sealant
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
Kafuter
-
Model Number:
-
5911B
-
Type:
-
Sealant
-
Appearance:
-
GREY/BLACK paste
-
temperature range:
-
-60~200 degree
-
Packing:
-
100g/pcs
-
Appilcation:
-
Sealing
-
Product name:
-
Silicone Sealant Glue
-
Material:
-
100% Silicone
-
Color:
-
Black
-
Keywords:
-
Sealing headlight
-
Feature:
-
Bonding Strength
-
Advantage:
-
Strong Adhestion
China Cheap Silicone Sealant Kafuter K-5911 Special Adhesive Seal For Automobile Headlights Glue
Characteristics:
1.One-part, neutral, no corrosion,room cure RTV silicon sealant
2.high viscosity, good thixotropy, will not produce any toxic or irritated odor
3.high-temp, pressure and solvent tolerance, low shrinkage, and no collapse.
4.good water and oil proof, impact and vibration resistance.
Application:
1. Seal in headlight for car.
2. Seal in heating terminals, bond themagnetic motor with its shell.
3. Seal in high voltage components or terminal, sensors, transformers, etc.
4. Bond metal, glass, ceramic, semi-conductor components, and plastic, etc.
5. Also, can seal in high temperature oven, steam iron, and industrial pipeline, etc.
Typical Properties:
|
Item |
K-5911 Silicone Sealant |
|
Appearance |
Gray/Black |
|
Viscosity ( cp ) |
Paste |
|
Density( g/cm 3 ) |
1.2~1.3 |
|
Initial Cure Time ( 25 °C ,min ) |
5 ~1 0 |
|
Tensile Strength ( MPa ) |
1.5 |
|
Elongation ( % ) |
200 |
|
Shear Strength(mpa) |
1.5 |
|
Hardness(Shore A) |
35~45 |
|
Pressure Tolerance(mpa) |
10 |
|
Temperature Range ( °C ) |
-60~200 |
|
Dielectric Strength(kv/mm) |
20 |
|
Permittivity(@60Hz) |
2.8 |
|
Volume Resistivity (Ω.cm) |
1×10 15 |
Directions:
(1) First, clean the surface,and apply the glue with less than 6mm thickness on the bonding surface, then assemble it.
(2) Wait for 5 minutes for initial cure, and 24h full cure.
Attentions:
(1) The cure cndition under damp air, also need more time to cure if the area is large.
(2) Pls tighten and store it well in case of curing inside.
Packing:
100g/pcs,100pcs/carton;
300ml/bottle, 30 bottles/carton
Outer Carton Size: 32X25.5*24.5cm
Factory Introduction
