80Bmicrocrystalline plate wax 70A Jingmen petrochemical microcrystalline wax 75#80 microcrystalline block wax

Basic introduction

Microcrystalline wax, white amorphous amorphous solid wax, mainly C31-70 branched chain saturated hydrocarbons, containing a small amount of cyclic, straight chain hydrocarbons, odorless and tasteless. Insoluble in ethanol, slightly soluble in hot ethanol, soluble in benzene, chloroform, ether, etc. It can be miscible with various mineral waxes, vegetable waxes and hot fat oils. The residue after petroleum fractionation is used as raw material and refined. Used for polish, rust prevention, carbon paper, candles, packaging impregnation and fruit coating of paste products; Also used in cosmetics, color pens, shoe polish, a variety of polishing wax and so on.

English alias

Microcrystalline wax; (2 r, 4 r, as 4, 6 as, 6 br, 8 ar, 12 ar, bs, as, bs) of 14-2 - Hydroxy - 4, 4 a, 6 b, 8 a, 11 of the final three b, 14 a octamethylicosahydropicen - 3 (2 h) - one; 3(2H)-picenone, eicosahydro-2-hydroxy-4,4a,6b,8a,11,11,12b,14a-octamethyl-, (2R,4R,4aS,6aS,6bR,8aR,12aR,12bS,14aS,14bS)-; CERIN

Physicochemical property

Properties: Odorless, tasteless, white amorphous amorphous solid wax.

Density :0.8-0.92g/ml

Melting point :60-90 ℃

Boiling point :510.078 ℃ (760 mmHg)

Lightning :215.876 ° C

Solubility: insoluble in ethanol, slightly soluble in hot ethanol, soluble in benzene, chloroform, ether, etc. It can be miscible with various mineral waxes, vegetable waxes and hot fat oils.

Chemical composition

It is dominated by C31-70 branched saturated hydrocarbons, containing a small amount of cyclic and straight chain hydrocarbons, ash content is less than 0.05%, and its heavy metal lead and arsenic content are less than 2×10. This kind of wax has large viscosity, ductility, is not fragile at low temperature, and has the characteristics of preventing oil separation when mixed with liquid oil. Microcrystalline wax with a melting point of 77-80 ° C has more or less ductility, similar to soft ground wax, and microcrystalline wax with a melting point of 88-90 ° C is hard and looks like lignite wax.

The refining method is mainly used. The residual oil after fractionation was used as raw material to extract the branch chain saturated hydrocarbon fraction above C31 by distillation, and then by deoiling and decolorizing.

Microcrystalline wax is also called ground wax

Oil content: 99.9 (%) Appearance: lumpy wax

Penetration without needle: 71 (mm) CAS: DF

This product is tasteless, white and beige amorphous solid wax. It is the residue left over from petroleum fractionation, extracted with solvents and chemically

A high boiling point long chain hydrocarbon obtained by the treatment method is mainly composed of C31-70 branch chain saturated hydrocarbons, a small amount of ring, branch chain hydrocarbons, melting point of 60-85℃, and can be miscible with various mineral waxes, plant waxes and hot fat oil. This kind of wax is large in particle size, and has ductility, is not vulnerable at low temperature, and has the characteristics of preventing oil separation when mixed with liquid oil. Microcrystalline wax with a melting point of 77-80 ° C has more or less ductility, similar to soft ground wax, and microcrystalline wax with a melting point of 88-90 ° C is hard and looks like montane wax (lignite wax).

Microcrystalline wax is a kind of fine synthetic wax with similar microcrystalline properties. It has the characteristics of good luster, high melting point, light color, small hardness, good flexibility, and large extension.

It has a strong oil-wet ability, and has good sealing, moisture resistance, toughness and electrical insulation properties.

The microcrystalline wax gel has the advantages of high strength, good adhesion and protection, and can be used to manufacture several kinds of hydrocarbon-based greases for instrumentation and sealing, and can also be used as vaseline type thickeners.

Due to the microcrystalline characteristics of the microcrystalline wax, the ointment, cooling oil, moisturizing cream, rouge, sunscreen anti-cracking cream, hair wax, etc., fine texture, good flexibility.

Microcrystalline wax can also be used as a modifier of paraffin wax, adding a small amount of microcrystalline wax to paraffin wax can improve the water permeability of paraffin wax, increase the bending resistance, improve the plasticity and plasticity

Flexible, so that paraffin wax used in waterproof, moisture-proof, casting, paper and other fields.

Widely used in military, electronics, metallurgy, chemical, daily chemical, medicine, rubber, cosmetics, food and food packaging and other industries.

(1) Polish for paste products;

(2) Used for rust, carbon paper, candles, packaging impregnation and fruit coating;

(3) Re-cosmetics industry used in lip balm, ointment, balm, hair cream;

Used for polish, rust, carbon paper, candles, packaging impregnation and fruit coating of paste products; Also used in cosmetics, color pens, shoe polish, a variety of polishing wax and so on.

Paraffin wax is widely used in candles or fiber board making. And it also play an important role in waterproof and moisture-proof,
fresh fruit keeping, electrical components insulation, rubber aging resistance and flexibility improvement. It can also be used to
manufacture detergent, emulsifier, dispersant, plasticizer, grease, synthetic fatty acid, etc.

1. Waterproof Design(Dual package, Waterproof bag Inside)
2. Water-proof , Anti-breaking,Anti-extrusion . Anti-heavy throw
3. Transporation by sea, the sample can be shipped by air.

Port of shipment: Tianjin, Qingdao

1.Factory supply : Spot sale

2.Sufficient supply : Quantity is better

3.Prompt delivery : Fast shipment

4.Worry free after sale : High quality and low price

Q: Are you trading company or manufacturer ?

A: We are factory/manufacturer. OEM can be acceptable.We can produce according to your indicators.

Q: Do you provide samples ? Is it free or extra?
A: Yes, we could offer 200 g free sample for each grade. otherwise, we provide free samples, but the freight will be afford by cleints. Free sample can be offered to ensure our quality.

Q: How can I get the samples?
A: Send me sample request, after confirmation we'll dispatch samples by courier.

Q: What is your terms of payment ?
A: Different payterms available, we will offer best support to our Long-term partners. T/T, DP ,LC ,DA

Q: How about OEM branding and packing?
A: Blank bag, Neutral bag available, OEM bag also available.

Q: How to ensure stable quality
A: Full automatic production line & all the production processes is in the sealed evironment.Have our own lab to test it from batch to batch. Make sure the quality for all the goods out of our plant.