Factory price of HTC HOWO 6t dry powder foam combined fire truck

Professional production and sales of sprinkler trucks (epidemic prevention and disinfection trucks), dust suppression trucks (fog cannon trucks, railway dust suppression trucks), garbage trucks (compressed garbage trucks, hook arm garbage trucks, kitchen garbage trucks, side hanging bucket garbage trucks), various garbage bins, mobile compressed garbage stations, cleaning and sweeping trucks (road sweepers, vacuum cleaners, deep cleaning trucks), suction and suction trucks, cleaning and suction trucks, material crushing trucks, photovoltaic cleaning and washing trucks, sewage treatment trucks, hedge trimming trucks Power supply vehicles, drainage vehicles, wall cleaning vehicles, dump trucks, various fire trucks, etc Basic structure:
1. It is an overall structure, with an equipment box at the front and a pump room at the rear.
2. The rear is the pump room, equipped with a dashboard and operating system. The equipment box and pump room are both equipped with locked roller shutter doors. Weld the frame structure and ensure its strength and stiffness.
3. The space can be adjusted arbitrarily, and the equipment box is equipped with drainage holes.
4. The equipment box is reliable, beautiful, and can be adjusted at will. It is equipped with a large space curtain door equipment box to ensure full utilization of space.
5. The carriage and pump room are equipped with lighting lights to meet the lighting needs during nighttime firefighting operations. Aluminum alloy roller shutter door:
1. All equipment compartments and pump rooms are equipped with locked roller shutter doors, with sturdy and durable handles and locking pins that do not deform. The sealing performance has been tested through water immersion to ensure no leakage.
2. There are rivets inside the sliding channels on both sides of the rolling shutter door to prevent it from falling off.
3. There are lighting fixtures in each equipment compartment, controlled by the opening and closing of the rolling shutter door.
4. The left and right sides are equipped with aluminum alloy curtain doors, with one rear door, which is safe and reliable, beautiful and practical. Basic principles:
1. Design various equipment brackets according to ergonomic principles;
2.The principle of simplicity and practicality in accessing any equipment inside the box without the need for any climbing tools.
3.Place equipment according to the logical relationship and frequency of use;
4. Stand on the ground or pedal and use any equipment within 1-2 actions. Electrical system
1. The top of the cab is equipped with red long row luxury alarm lights.
2. The power of the alarm is 100W;
3. To ensure safe use, the entire vehicle wiring harness is made of integral wiring harnesses, and waterproof plugs are used at the connections to ensure the safety of the wiring during use.
4. The roof is equipped with one fire spot lighting lamp; Safety sign lights are installed below both sides of the vehicle, and reflective markings are affixed to the body and rear according to standards.
5. All equipment boxes are equipped with LED lighting for convenient night combat lighting.
6. The vehicle is equipped with two flashing lights above each side, safety signs and side reflex reflectors (combined) installed below, front and rear clearance lights, one turn signal light on each side, and lighting lights in the passenger compartment, equipment box, and pump room.
7. The alarm, warning light, strobe light, and circuit are independent additional circuits, and the controller is installed in the cab.
8. All lines are protected with sleeves, and different colors are used to distinguish the connection form and function of the lines.
9. Equipment on the instrument panel in the pump room: liquid level gauge, tachometer, pressure gauge, vacuum gauge, equipment box lighting switch, etc.