LXC7110 Lixise Generator Spare Parts Control Unit Module Accessories with LCD Display SMS RS485 30A Genset Controller Panel

LXC7XXX series of power plant automation controller for the automation and monitoring systemof asingle diesel generator sets, use 32-bit microprocessor technology, achieve generator sets automaticboot/shutdown, the precision measurement of various parameters, alarm protection and threeremotefunction.
The controller uses a large-screen LCD (240*128LCD)graphics display, all the important.
parameters can be displayed in page, save the page.
At the same time can be displayed Chinese, Englishand other languages, all parameters can be adjusted from the controller panel, can also beaPCthrougha USB interface tweaks and RS485 or GPRS remote adjustment and monitoring.
Its structureiscompact,simple wiring, high reliability, automation control systems are widely used in all types of generator setsand fire pumps.

LXC7X10:Auto Stare Module, controls genset to start or stop automatically by remote start signal. LXC7X20:Auto Main Failure, updates based on LXC7X10,especially for automatic systemcomposedbygenerator and mains. Main characteristics:With ARM-based 32-bit CPU, highly integrated hardware, new reliability level;
240x128 LCD with backlight, multilingual interface(including English, Chinese or other languages)which can be chosen at the site, making commissioning convenient for factory personnel;
All parameters can use the computer via USB, RS232, RS485 interface to connect andadjust, whilethe internal FLASH memory withinthe controller in the system when power is not lost;
99% of the parameters can be set directly from the front panel for easy on-site commissioning;
RS485 communication port enabling remote control, remote measuring, remote communicationviaModBus protocol (controller with RS485 port only);
Equipped with SMS(Short Message Service)function. When genset is alarming, controller cansendshort messages via SMS automatically to max.5 telephone numbers. besides, generator statuscanbe controlled and checked using SMS. With advanced networking capabilities, via GPRSmobilenetwork and Internet connectivity, in any place where the network can be remotely monitor;( Needtoinstall the GPRS module: LXI680);
Equipped with CANBUS port and can communicate with J1939 genset. Not only can youmonitoringfrequently-used data(such as water temperature, oil pressure, speed, fuel consumptionandsoon)ofECU machine, but also control starting up, shutdown, raising speed and speed droop viaCANBUSport (controller with CAN Bus port only);

Suitable for 3-phase 4-wire,3-phase 3wire,single phase 2-wire,and2-phase 3-wire (120/240V)powerand 50/60Hz Systems;
Collects and shows 3-phase voltage, current, power parameter and frequency of generator or mains;For Mains, controller has over and under voltage, over and under frequency, loss of phaseandphasesequence wrong detection functions; For generator, controller has over and under voltage, overandunder frequency, loss of phase, phase sequence wrong, over and reverse power, over current.
functions;
3 fixed analog sensors(temperature, oil pressure and liquid level),more kinds of curves of temperature,oil pressure, fuel level can be used directly and users can define the sensor curvesbythemselves;2 configurable sensors can be set as sensor of temperature or fuel level; (Only LXC72XOhavethisfeature);

Protection: Automatic start/stop of the genset, ATS(Auto Transfer Switch)control with perfect fault indication and protection function. When multiple warnings occur, the warning bar will rotatetodisplay them, so that we can analyze the reasons;
All output ports are relay-out, And the main output 16A relay outputs and three passiverelayoutput,more user-friendly;
Parameter setting: parameters can be modified and stored in internal FLASH memory andcannot belost even in case of power outage; most of them can be adjusted using front panel of thecontrollerand all of them can be modified using PC via USB or RS485 ports. With advanced networking capabilities, via GPRS mobile network and Internet connectivity, inanyplace where the network can be remotely monitor;

A variety of starting conditions for success (speed sensor, oil pressure, power generation) toselect,to facilitate the needs of special occasions;
Wide power supply range (8 ~ 35) VDC, can adapt to different environment starting batteryvoltage,can under the low voltage of starting motor moment continue to work for 3 seconds;
Fault history with 200, and can record the fault instant oil pressure water temperature, voltage, current and other important parameters;
Equipped with real-time clock, scheduled start & stop generator(can be seas start gen-set onceaday/week/month with load or not),reach automatic maintenance;
Can be used on pumping units and as an indicating instrument (indicate and alarmareenableonly,relay is inhibited );
3 set of maintenance functions, can be set for the machine maintenance cycle .Maintenancetimetoaction can be set up(only warning or alarm stop);
Waterproof security level IP55 due to rubber seal installed between the controller enclosureandpanel fascia;
Improved LCD wear-resistance and scratch resistance due to hard screen acrylic;
Silicon panel and push buttons for better operation in high-temperature environment,andhasagoodwaterproof performance;
Modular design, anti-flaming ABS plastic enclosure, plug gable connection terminals andembeddedinstallation way, compact structure with easy mounting. Special industry application characteristics:

Leasing industry applications: management provides the perfect solution: leased out viaPCremoteManagement of the unit, you can monitor all operating parameters (oil pressure, water temperature,voltage, current, power, etc),you can always change the configuration to protect the unit isnot properapplication, can record 200 detailed fault information, including: time to failure, because,whenthevoltage, current, power, oil pressure, water temperature and other key parameters, andreadytoupload to the monitoring machine. Another multi-level password management options tofacilitatethelease management;
Fire pump industry applications: Close electrical parameter measurement function, usepowerfulProgrammable input and output ports and internal programmable logic to achieve automatedpumpcontrol system. Instead of the conventional engine controller PLC + simple manner ,makingthesystem more stable and reliable;
Air compressor industry applications: Close voltage measurements protection, accordingtotheneedto configure programmable analog input, overload protection , with programmable digital inputs, complete startup control, temperature and pressure control, protection parameter settings.