minew ble&wifi G1 gateway bluetooth beacon gateway

minew ble&wifi G1 gateway bluetooth beacon gateway

G1 is a Bluetooth low energy (BLE) to Wi-Fi connectivity gateway

without the uses of smartphones or apps.

The G1 gateway collects the data from iBeacon, Eddystone, BLE sensor and other BLE devices, and then sends to the local server or remote cloud server by HTTP / MQTT protocol over Wi-Fi / Ethernet.

2.Supports 10/100 Ethernet with 802.3af PoE

3.Supports firmware upgrade Over-the-Air

4.Supports HTTP(support SSL/TLS)/MQTT(support SSL/TLS)

5.Operating temperature: -25℃ to 65℃

WIFI:

1.Wifi module based on the Mediatek's MT7628 575MHz 32-bit Application Processor

2. 2T2R 2.4 GHz with 300 Mbps PHY data rate,802.11b/g/n WiFi

3. Two USB 2.0 Host Connectors and one TF Card slot

4.128 Mbyte 16-bit DDR2 RAM

5.16 Mbyte SPI NOR Flash

6.RGB LED strip as the status indicator

7.OpenWrt, Linux distribution for embedded devices.

BLE:

BLE module based on the Nordic's nRF52832 with ARM® Cortex®-M4 64MHz 32-bit processor

BLE module have built-in power amplifier chip,make scanning BLE more sensitive

At least Bluetooth 4.0(Only Bluethooth Low Energy)

Typical Application

iBeacon / Eddystone / other BLE tag receiver

BLE sensor reader / receiver

Asset tracking

Access control management

Advertisement promotion

Indoor location and position

Industrial automation

- Print your logo on the top of gateway;

- Programmer your firmware into gateway;

- Package can be customized if required;

- Prototyping the casing and mold tool design and injection service.