- Product Details
- {{item.text}}
Quick Details
-
Application:
-
garage
-
Place of Origin:
-
Zhejiang, China
-
Brand Name:
-
Hiland
-
Model Number:
-
SLG52804
-
Limit Switch:
-
spring limit
-
Power:
-
280W
-
Max gate weight:
-
600kgs
-
Output Voltage:
-
14Nm
-
Gate moving speed:
-
13m/min
-
Code:
-
Rolling Code
-
Working Voltage:
-
AC 220V
Quick Details
-
Warranty:
-
1 Year
-
After-sale Service:
-
Online technical support
-
Project Solution Capability:
-
graphic design
-
Application:
-
garage
-
Place of Origin:
-
Zhejiang, China
-
Brand Name:
-
Hiland
-
Model Number:
-
SLG52804
-
Limit Switch:
-
spring limit
-
Power:
-
280W
-
Max gate weight:
-
600kgs
-
Output Voltage:
-
14Nm
-
Gate moving speed:
-
13m/min
-
Code:
-
Rolling Code
-
Working Voltage:
-
AC 220V
Products Description
Installation
SLG5280X sliding gate opener is applicable to gate weight less than 600kg, and length of the sliding gate should be
less than 8m. The drive mode adopts the gear and rack transmission. This gate opener must be installed inside the enclosure or yard for protection.
less than 8m. The drive mode adopts the gear and rack transmission. This gate opener must be installed inside the enclosure or yard for protection.
Control board wiring
1 .The opener should be install on the left side of the sliding door because it is set as clockwise when delivery . If needs to
install on the right side of the sliding door ,the DIP switch 6 should be changed into the opposite side.
2. Disconnect the power and connect the wires by professionals
3 .Open the top cover of the motor, and connect the wires according to the following figure, then install the top cover again
after debugging
1 .The opener should be install on the left side of the sliding door because it is set as clockwise when delivery . If needs to
install on the right side of the sliding door ,the DIP switch 6 should be changed into the opposite side.
2. Disconnect the power and connect the wires by professionals
3 .Open the top cover of the motor, and connect the wires according to the following figure, then install the top cover again
after debugging
More options
Our Exhibition
Hot Searches
