- Product Details
- {{item.text}}
Quick Details
-
Description:
-
Inductance Sensor
-
Ambient Light:
-
Ambient Ligh
-
Interface:
-
Analog
-
Color:
-
White
-
Ambient-light:
-
Ambient-light
-
Time delay:
-
5sec-7min
-
Detector Distance:
-
12m Max(<24°C)
-
Usage:
-
Temperature Sensor
-
Theory:
-
Inductance Sensor
-
Output:
-
Switching Transducer
-
Amplifier Type:
-
Infrared
Quick Details
-
Model Number:
-
SP-S18
-
Place of Origin:
-
Zhejiang, China
-
Brand Name:
-
YINGXIN
-
Description:
-
Inductance Sensor
-
Ambient Light:
-
Ambient Ligh
-
Interface:
-
Analog
-
Color:
-
White
-
Ambient-light:
-
Ambient-light
-
Time delay:
-
5sec-7min
-
Detector Distance:
-
12m Max(<24°C)
-
Usage:
-
Temperature Sensor
-
Theory:
-
Inductance Sensor
-
Output:
-
Switching Transducer
-
Amplifier Type:
-
Infrared
Product Description
180 Degree Outdoor IP44 Security PIR Infrared Motion Sensor Switch Movement Detector Energy-saving Automatic Lighting Switch
This product is a new type of energy-saving lighting switch, it adopts high sensitivity detector, integrate circuit and
SMT;It gathers automatic, convenient, safe,energy-saving, practical functions; It has wide detection range made up of
up and down, left and right service field; It utilizes human motion infrared rays as control signal sources,when one enters
the detection field, it will start the controlled load at once; It can identify day and night automatically; It is easy to install
and its usage is wide; It has the function of power indication and detection indication.
Test
Turn the light-control knob clockwise to the maximum (SUN), turn time knob anti-clockwise to the minimum;
Switch on power, the controlled load should not work, under the no induction signal condition, the load
should stop work within 5-30sec;
Make it sense again 5-10sec later since the first is out, the load should work, the load should stop working
within 5-20sec;
Turn LUX knob to minimum anti-clockwise, if you test it when the light control is more than 3LUX, the
induction load would not work after the load stops working; the load should work if you cover the detection
window with opaque object (towel etc),it would be regular the load stops to work within 5-15sec under no
induction signal condition.
Note
Should be installed by electrician or experienced person;
Avoid installing it on the unrest object;
There should be no hindrance and moving objects in front of the detection windows to effect detection;
Avoid installing it near air temperature alteration zones such as air condition, central heating, etc;
Considering your safety, please do not open the cover when you find the hitch after installation;
If there is difference between instruction and the function the product has, please give priority to product
and sorry not to inform you additionally.
Some problem and solved way
1
,
The load do not work:
a: Please check if the connection-wiring of power and load is correct;
b: Please check if the load is good ;
c: Please check if the working light set correspond to ambient light.
2
,
The sensitivity is poor:
a: Please check if there has hinder in front of the detection window to effect to receive the signal;
b: Please check if the ambient temperature is too high;
c: Please check if the induction signal source is in the detection fields;
d: Please check if the installation height corresponds to the height showed in the instruction;
e: Please check if the moving orientation is correct.
3
,
The sensor can not shut off the load automatically:
a: Please check if there is continual signal in the detection field;
b: Please check if the time delay is the longest;
c: Please check if the power correspond to the instruction;
d: Please check if the temperature near the sensor change obviously, such as air condition or central
heating etc.
Hot Searches
