Note: Once the code is cleared, it cannot be restored. Please operate with caution.
Switch Working Mode:
1. Momentary
Mode
:
Continuously and quickly press the “ON” button of the controller twice, the indicator light flashes twice to indicate that the switch is successful, and the work mode is momentary.
The working logic is: Press the remote control button, the controller relay will be
connected
, release the remote control button, the controller relay will be disconnected.
2. Toggle Mode:
Continuously and quickly press the “ON” button of the controller 3 times, the indicator light flashes 3 times to indicate that the switch is successful, and the work mode is
Toggle
.
The working logic is: Press the
“A”
button
of the remote control, the controller relay will be
connected
, p
ress the “A” button of the remote control again
, the controller relay will be disconnected.
3.Latched Mode:
Continuously and quickly press the “ON” button of the controller 4 times, the indicator light flashes 4 times to indicate that the switch is successful, and the work mode is
Latched
.
The working logic is: Press the “A” button of the remote control, the controller relay will be connected, press the “B” button of the remote control again, the controller relay will be disconnected.
The working logic is: Press the “A” button of the remote control, the controller relay will be connected, press the “B” button of the remote control again, the controller relay will be disconnected.
