1. drill hole : drill out the hole whose diameter and depth is designed by requirement

2.ash removal: blow the ash in the hole by compressed air

3.mix the material: A:B=100:3, and mix sufficient

4.filling : filling the hole with mixed glue and squeeze the air out

5.anchoring: put the anchor rod into the hole

Two-component, high-strength, mixed resin adhesive, which is packaged in a single hose, is injected with a glue gun and mixed thoroughly through a static mixer, injected directly into the hole and rapidly solidified.

Fixing heavy machines, handrails, steel constructions, reinforcement bars, wooden constructions, especially suitable for big diameter rebars and rods.

A: With fast curing at room temperature, bonding strength, strong anchorage, anti-aging, etc..

B:Anti-acid and alkali, good seismic performance, no expansion;

C:Good thixotropy, especially for the side or top anchorage anchorage;

D:Two-component, high-strength, mixed resin adhesive, which is packaged in a single hose, is injected with a glue gun and mixed thoroughly through a static mixer, injected directly into the hole and quickly cured.