- Product Details
- {{item.text}}
Quick Details
-
Transmission Distance:
-
25KM
-
Power supply:
-
DC 5V/2A
-
Fiber Type:
-
SM / MM
-
OEM:
-
Support
-
Transmission Type:
-
10/100M FDX/HDX
-
Data Rate:
-
10/100Mbps
-
BER:
-
<1E-8
-
Data Buffer:
-
128Kb
-
Storage Temperature:
-
-45℃~80℃
-
EMC:
-
FCC Part15
Quick Details
-
Model Number:
-
Fiber Optic to RJ45 Media Converter
-
Place of Origin:
-
Zhejiang, China
-
Brand Name:
-
Snow-Sea
-
Transmission Distance:
-
25KM
-
Power supply:
-
DC 5V/2A
-
Fiber Type:
-
SM / MM
-
OEM:
-
Support
-
Transmission Type:
-
10/100M FDX/HDX
-
Data Rate:
-
10/100Mbps
-
BER:
-
<1E-8
-
Data Buffer:
-
128Kb
-
Storage Temperature:
-
-45℃~80℃
-
EMC:
-
FCC Part15
10/100M 1310/1550nm Single Mode Single Fiber WDM Bidirectional 25km Fiber Optic to RJ45 Media Converter
GENERAL DESCRIPTION
The media converter transform the transmission media of Ethernet signal from CAT5 to optical fiber.
It can extend the transmission distance to several kilometers or hundred kilometers.
Using media converter is a economical solution to achieve long distance transmission base on current status.
FIGURE 1.1 Media converter application
FEATURES
1.Built in a 2-port switch:
Pass all packets without address and CRC check (optional);
Supports modified cut-through frame forwarding for low latency;
Supports pure converter mode data forwarding for extreme low latency;
Supports flow control for full and halt duplex operation;
Bandwidth control;
Forward 1600 bytes packet for management;
Optional forward fragments.
2. Supports 100Base-FX standard;
3.Built in 128Kb RAM for data buffer;
4.Supports auto MDI-MDIX function;
5. Supports link fault pass through function (LFP);
6. Supports for end fault function (optional);
7. LED display for link/activity, full/half, 10/100M
8. Support EEPROM configuration (optional);
9. the longest transmission distance reach 120 kilometers;
STANDARD
IEEE802.3 ETHERNET STANDARD
IEEE802.3u FAST ETHERNET STANDARD
PRODUCTS CLASSIFICATION & LEDs
1. ACCORDING TO OUTLINE:
200V/110V AC input power standalone media converter;
+5V DC input power standalone media converter;
Optional USB PORT or +5V DC input power standalone media converter;
media converter Card;
Rack System Chassis(2U);
2.ACCORDING TO QUANTITY of FIBER:
Single fiber bidirection media converter,
Dual fiber media converter;
3. ACCORDING TO TYPE OF FIBER:
Mutimode media converter, Singlemode media converter;
4. +5V DC input power standalone media converter can be applied for 14 slots rack mounted chassis, media converter Card applied for 16 slots rack mounted chassis
SWITCH SETING
TABLE 5.1 SWITCH SETTING DISCRIPTION FOR MEDIA CONVERTER CARD
|
NO. |
FUNCTION |
DISCRIPTION |
|
1 |
LFP |
UP: Link fault pass through(LFP) DOWN: LFP function disabled (default) |
|
2 |
Direct_Wire |
Direct_Wire Fast_FWD DOWN DOWN Store and forward switch mode (default) DOWN UP Modified cut-through switch mode UP DOWN Converter mode UP UP Converter mode with auto-change-forward function |
|
3 |
Fast_FWD |
|
|
5 |
FX_Full |
DOWN: fiber port full duplex ( default ), UP: half duplex |
|
6 |
X_EN |
DOWN: IEEE802.3X enabled (default), UP: disabled |
|
4 |
TP_Force |
TP_Force Speed_Mode Duplex_Mode DOWN DOWN DOWN 100M/10M, FDX/HDX with auto negotiation DOWN DOWN UP 100M/10M, HDX with auto negotiation DOWN UP DOWN 10M, FDX/HDX with auto negotiation DOWN UP UP 10M, HDX with auto negotiation UP DOWN DOWN 100M, FDX with auto negotiation UP DOWN UP 100M, HDX with auto negotiation UP UP DOWN 10M, FDX with auto negotiation UP UP UP 10M, HDX with auto negotiation |
|
7 |
Speed_Mode |
|
|
8 |
Duplex_Mode |
TABLE 5.2 SWITCH SETTING DISCRIPTION FOR STAND ALONE MEDIA CONVERTER
|
NO. |
FUNCTION |
DISCRIPTION |
|
1 |
LFP |
UP: Link fault pass through (LFP) DOWN: LFP function disabled (default) |
|
2 |
Direct_Wire |
Direct_Wire Fast_FWD DOWN DOWN Store and forward switch mode (default) DOWN UP Modified cut-through switch mode UP DOWN Converter mode UP UP Converter mode with auto-change-forward function |
|
3 |
Fast_FWD |
|
|
8 |
FX_Full |
DOWN: fiber port full duplex ( default ), UP: half duplex |
|
5 |
X_EN |
DOWN: IEEE802.3X enabled (default), UP: disabled |
|
4 |
TP_Force |
TP_Force Speed_Mode Duplex_Mode DOWN DOWN DOWN 100M/10M, FDX/HDX with auto negotiation DOWN DOWN UP 100M/10M, HDX with auto negotiation DOWN UP DOWN 10M, FDX/HDX with auto negotiation DOWN UP UP 10M, HDX with auto negotiation UP DOWN DOWN 100M, FDX with auto negotiation UP DOWN UP 100M, HDX with auto negotiation UP UP DOWN 10M, FDX with auto negotiation UP UP UP 10M, HDX with auto negotiation |
LED FUNCTION DISCRIPTION
TABLE 6.1 LED FUNCTION DISCRIPTION
|
LED |
|
STATUS |
|
PWR |
ON |
POWER ON |
|
OFF |
POWER OFF |
|
|
FX-SD |
ON |
RECEIVER OPTICAL SIGNAL |
|
OFF |
NO OPTICAL SIGNAL INPUT |
|
|
FX-LINK/ACT |
ON |
LINKED ON FIBER PORT |
|
FLASH |
ACTIVITY |
|
|
OFF |
NOT LINKED |
|
|
TX-SPD |
ON |
100M BASE-TX |
|
OFF |
10M BASE-TX |
|
|
TX-LINK/ACT |
ON |
LINKED ON UTP PORT |
|
FLASH |
ACTIVITY |
|
|
OFF |
NOT LINKED |
|
|
TX-FDX/COL |
ON |
FULL DUPLEX |
|
OFF |
HALF DUPLEX |
PARAMETER
TABLE 8.1 PARAMETER
|
|
10/100M multimode media converter |
10/100M singlemode media converter |
|
Cable |
MM Fiber / Twist Pair |
SM Fiber / Twist Pair |
|
Transmission Type |
10/100M FDX/HDX |
10/100M FDX/HDX |
|
MTBF |
>3 years |
>3 years |
|
BER |
<1E-8 |
<1E-8 |
|
Data Buffer |
128Kb |
128Kb |
|
Power temperature variation |
0.2mw/℃ |
0.2mw/℃ |
|
Input Power Range(dBm) |
0~-30 |
0~-40 |
|
Operate Temperature |
0℃~70℃ |
0℃~70℃ |
|
Storage Temperature |
-45℃~80℃ |
-45℃~80℃ |
|
Imax |
800mA |
800mA |
|
Power |
2.5w |
2.5w |
|
EMC |
FCC Part15 |
FCC Part15 |
|
Size |
95×70×26mm (external power ) |
95×70×26mm (external power ) |
|
140×110×30mm (internal power ) |
140×110×30mm (internal power ) |
ORDERING INFOMATION
TABLE 9.1 ORDERING INFOMATION
|
P/N |
λTx nm |
λRx nm |
Ptx dBm |
SEN dBm |
Overload dBm |
Distance Km |
Loss dB/Km |
Connector |
|
SNP-8110MA-2F-3S SNP-I8110MA-2F-3S |
1310 |
1310 |
-22~-12 |
≤-30 |
≥-3 |
2 |
2 |
MM Duplex SC |
|
SNP-8110SA-20F-3S SNP-I8110SA-20F-3S |
1310 |
1310 |
-15~-8 |
≤-38 |
≥0 |
20 |
0.35 |
SM Duplex SC |
|
SNP-8110SA-40F-3S SNP-I8110SA-40F-3S |
1310 |
1310 |
-8~-3 |
≤-38 |
≥0 |
40 |
0.35 |
SM Duplex SC |
|
SNP-8110SA-60F-3S SNP-I8110SA-60F-3S |
1310 |
1310 |
-3~0 |
≤-38 |
≥0 |
60 |
0.35 |
SM Duplex SC |
|
SNP-8110SA-80D-5S SNP-I8110SA-80D-5S |
1550 |
1550 |
-5~0 |
≤-38 |
≥0 |
80 |
0.25 |
SM Duplex SC |
|
SNP-8110SA-100D-5S SNP-I8110SA-100D-5S |
1550 |
1550 |
≥-1 |
≤-38 |
≥0 |
100 |
0.25 |
SM Duplex SC |
|
SNP-8110SA-120P-5S SNP-I8110SA-120P-5S |
1550 |
1550 |
≥1 |
≤-40 |
≥0 |
120 |
0.25 |
SM Duplex SC |
|
SNP-8110SB-20F-35S SNP-I8110SB-20F-35S |
1310 |
1550 |
-15~-8 |
≤-36 |
≥0 |
20 |
0.35 |
SM BIDI SC |
|
SNP-8110SB-20F-53S SNP-I8110SB-20F-53S |
1550 |
1310 |
-8~-3 |
≤-36 |
≥0 |
20 |
0.25 |
SM BIDI SC |
|
SNP-8110SB-40F-35S SNP-I8110SB-40F-35S |
1310 |
1550 |
-3~0 |
≤-36 |
≥0 |
40 |
0.35 |
SM BIDI SC |
|
SNP-8110SB-40F-53S SNP-I8110SB-40F-53S |
1550 |
1310 |
-5~0 |
≤-36 |
≥0 |
40 |
0.25 |
SM BIDI SC |
|
SNP-8110SB-60D-35S SNP-I8110SB-60D-35S |
1310 |
1550 |
-3~0 |
≤-36 |
≥0 |
60 |
0.35 |
SM BIDI SC |
|
SNP-8110SB-60D-53S SNP-I8110SB-60D-53S |
1550 |
1310 |
-3~0 |
≤-36 |
≥0 |
60 |
0.25 |
SM BIDI SC |
