- Product Details
- {{item.text}}
Quick Details
-
Rated Voltage:
-
220
-
Tensile Strength:
-
70KN
-
Color:
-
CustomizedGrey,Red and others
-
Voltage:
-
10KV-500 KV
-
Mechanical tensile load:
-
70KN-210KN
-
Ball and sockent size:
-
16,20
-
Section length:
-
330mm-4430mm
-
Minimum arcing distance:
-
160mm-4060mm
-
Minumum creepage distance:
-
450mm-13750mm
-
Key words:
-
composite polymer insulator,suspension insulator
-
Product name:
-
220 kv polymer strain tension suspension insulators
Quick Details
-
Place of Origin:
-
Hebei, China
-
Brand Name:
-
OEM
-
Model Number:
-
FXBW4-220/70
-
Rated Voltage:
-
220
-
Tensile Strength:
-
70KN
-
Color:
-
CustomizedGrey,Red and others
-
Voltage:
-
10KV-500 KV
-
Mechanical tensile load:
-
70KN-210KN
-
Ball and sockent size:
-
16,20
-
Section length:
-
330mm-4430mm
-
Minimum arcing distance:
-
160mm-4060mm
-
Minumum creepage distance:
-
450mm-13750mm
-
Key words:
-
composite polymer insulator,suspension insulator
-
Product name:
-
220 kv polymer strain tension suspension insulators
220 kv polymer strain tension suspension insulators
Introduction and Technology drawing:
Composite Suspension Insulator is also known as "composite long rod insulator". The term "long rod" is actually used for a specific design of porcelain insulator which was first introduced in Germany in the 1920s as an alternative to cap-and-pin insulators (and also for critical ambient conditions, for example high pollution).
Fitting configuration
Composite suspension insulators are available with six end fitting configurations shown on this page and therefore, adapt easily to any method of attachment to structures and conductor clamps.The user’s selection of the required end fitting combination will depend upon construction situation (new or retrofitted line)specific application (I, V, dead end) and maintenance practice.Each end fitting configuration is identified by a type letter (E, B, Y, etc.)
Table shows typical models. Higher voltages and other dimensions or fittings combinations are available on request.
The methods employed to pack composite insulators are the result of experience gained from shipping millions of insulators to user warehouses and construction sites in a large number of countries worldwide.The packing method illustrated below have been developed to minimize possible damage during shipment and storage as well as to reduce space and freight cost. The separators are made by wood.
Established in 1988, HeBei JiuBai Technology company limited is engaged in the research ,development ,manufacturing and service of 10 KV-1000KV pin ,suspension,cross-arm and post composite insulator,electrified railway composite insulator and 10KV-110KV zinc-oxide surge arresters,isolation switches,fuse cutout and other electrical transmission equipments.We have developed 110-500KV composite insulator one-pass injection and moulding technology .With our products available in numerous specifications,main applications include power plants ,electrical transmission lines,transformer substations,railways and may other facilities.
Executive standard: GB/T 19519 higher than the nominal voltage 1000V AC composite insulator for overhead lines - Definitions, test methods and acceptance criteria GB/T 20142 higher than the nominal voltage 1000V AC transmission line with composite line post insulators - Definitions, test methods and acceptance criteria
Our company adhere to the "strives for the survival by the quality, to the technology strives for the progress, to varieties and development efficiency, with reasonable, credibility of the market" business purposes, is committed to keeping up with advanced enterprises at home and abroad. After efforts to enterprise has achieved great development achievements, the company's products has been the enterprise project is chosen.
We sincerely welcome customers to come to my company guidance and negotiate business, we will provide you with the most excellent products and quality services.
1 How long is your products warranty ?
A: The warranty period of our products is 18 months.
2 How about inspection?
A: We have the whole inspection system from raw material to end products include temperature test,strength test and so on.
3 What do you have for certificate?
A: Our products are passed through IEC60947and IEC60269standarded.
4 What is payment terms?
A: T.T,Western Union and L/C isacceptable.
5 What is the service offered by company?
A: We have the professional enginer team which can design and develop the mold to arrive different customer nequirement.
We also have the sales team to offer good service from pre-sale to after-sale.
6 How to become the agents for JIUBAI?
A: It is OK! We will depend on the sales turn over and also do research on your market. If your have interest,let us discuss more !
