rectangular weight plates 10kg 20kg weights for weight stack

Product Description

(2) thickness * wideness 20*70/ 24*90/ 24*100/ 24*123/22*105/ 22*115 / 15.5*100 / 14.7*100/ 40*60 /60*60 (can produce according to your requirements)

(3)length:280-510mm is all right

(4) weight:5kg 10kg 15kg etc.

(5) Distance of the hole: 127/152.4/178/180/190/200/204/230/250mm

(6) Middle Hole Diameter : 22 25 25.5 29.8 30 33 35 38 mm

(7) two sides hole: 30 33 35 38 mm ( use plastic cover to adjust the size of sides holes according to clients requirement ).

(8) bye hole: 8.5 9 9.5 10 10.5 11.2 11.8 12 15 16 16.5 17 18 18.2 18.5 19.5 20 ( 9, 9.5, 10, 10.5in common use 11.2 standard)

We can offer all kinds of Steel Weight Plates according to customer's requirements.we could provide you the holes pitch as followings:127mm,152.4mm,190mm,200mm,230mm.

All 6 sides of the plate are surface machined flat at close tolerances .

so they stack evenly on top of each other without unsightly gaps or misalignment.

The  weight stack plates have nylon bushings pressed into each guide rod hole bore to reduce

friction and noise.

There are 2 performance of weight stack only (simple  weight stack set/weight stack tower ).

Below just example ,size can be flexible and client made .

WEIGHT STACK  SET RECOMMEND 1:

Dimensions: 1.57" Thick x 5" Wide x any Length ,we also call it (15MM*125MM)
Weight: 5KG  nominal 75kg/set
Each plate accepts a 10mm  Diameter weight stack pin.
Select either 19mm   guide rod holes

WEIGHT STACK  SET RECOMMEND 2:

Dimensions: 1" Thick x 4" Wide x any Length /1" Thick x 3" Wide x any Length ,we also call it (25MM*100MM)/(25MM*70MM) /two size makes weight stack tower performance .
Weight: 5KG  nominal  100 kg/set
Each plate accepts a 10mm  Diameter weight stack pin.
Select either 20mm   guide rod holes

Packing and shipping:

These are not your normal run-of-the-mill cast iron weight stack plates typically found on

low-end exercise equipment.

Unlike cast steel, cast iron weight stack plates shatter easily and vary wildly in weight accuracy.

Each plate is powder coated with a durable textured black finish.

Order as many component parts as needed to build your own weight stack from US.

All components of our weight stack systems are completely interchangeable and can be mixed and

matched at will, as long as all guide rod hole diameters are the same for any given configuration.