Low Price K3 Small Manual Precision Hand Press Arbor Press

Low Price K3 Small Manual Precision Hand Press Arbor Press

Features:

• Using a four-column three-plate structure, the movable plate is parallel to the working table with high precision, and the four-column precision linear self-lubricating bearing has high vertical accuracy;
• Using built-in fast cylinder, fast down-work-in-fast return, fast speed and high production efficiency;
• Using imported low-noise, high-performance high-pressure oil pump and solenoid valve with long service life;
• Pressure, stroke, holding pressure, etc. can be adjusted according to pressing process requirements;
• Comprehensive safety design, two-hand operation, equipped with emergency stop button and up and down inch mold adjustment button;
• It can also design the blanking trough and air blowing device according to customer's requirements to improve production efficiency;
• Optional infrared safety device, grating ruler and display are available to accurately display the displacement of the cylinder.

Scope of application:

• Embossing, forming, shallow drawing, shaping and pressure assembly of metal or non-metal parts;
• Pressing of glasses, locks and hardware parts, electronic connectors, electrical parts, motor rotation, stator pressing, etc.
• Especially suitable for die-cutting and shaping of aluminum, magnesium, lead alloy die-casting products, pressing of plastic rubber, powder products, etc .;
• The automotive and motorcycle parts industry is the most widely used.

Precautions:

• Proper use of hydraulic press machinery and equipment, careful maintenance and strict compliance with safe operating procedures are necessary conditions to extend equipment life and ensure safe production.
• Maintenance
  1. The oil used in this machine must be strictly filtered before being filled into the oil tank, and its           oil level cannot be lower than the oil indication.
  2. The oil tank is cleaned and replaced with new oil once a year. The first oil change time should             not exceed six months. The oil can be re-filtered and used again.
  3. It is recommended to use N46 anti-wear hydraulic oil or N46 low condensation hydraulic oil.
  4. Check the pressure gauge every six months.
  5. When the machine is stopped for a long time, wipe the exposed processing surfaces clean and          apply anti-rust oil.
• Safe operating procedures
  1. Those who do not understand the structure performance and operating procedures of the                    machine should not start the machine without authorization.
  2. If you find that the machine has a serious oil leak or an abnormal phenomenon (unreliable                 movement, loud noise, vibration, etc.), stop the machine immediately to check and analyze the         cause, and remove the fault to prevent the machine from running sick. Otherwise, the                           consequences are at your own risk.
  3. During the work of the machine, it is not allowed to overhaul or adjust the mold.
  4. It is strictly forbidden to use overload and partial load.
  5. It is strictly forbidden to use the cylinder over-travel and over-pressure.

1. WHY CHOOSE US - JOBEST GROUP?

Pre-sale:
(1) Regarding your demands, the best suitable machine will be recommend you, the customized machine also support;
(2) Regarding your country requirements, some certificates will supply to help you clearance. Like CE,CO, FORM-A, FORM-E, FORM-F, original certificate signed by Embassy.etc.
(3) All the machine will be tested before delivery, and we will take the video and pictures to you. When you receive it , it can work directly.
After-sales
(1) We will supply all the control system and software operate manual,so you can operate the machine easily refer it.
(2) All the machine problem , you can ask me any time , we will help you solve by online way ,or tel,email,remote video at first time ,if all these can’t solve your problem , our engineer will go to your factory to help you on spot.
Welcome to our factory for learning how to operate machine ,one professional engineer will together with you , this service for free.
2. Guarantee
One year for whole machine , any parts except consumables broken regarding machine quality within one year,We will send you the parts for free.

3. Are you factory or trading company?
We are factory in an industrial town near Shanghai city.
4. What shall we do if don't know how to operate your machine?
We can arrange our engineers to your country and you can also send your engineers to our factory for learning operation. Besides, there are detailed installation and operating instructions attached. It's very simple, we have telephone and Email support at 24hours per day.
5. What are your payment terms?
We support T/T,  Western Union and so on. Other ways can also be accepted after we both sides' discussion and agreement.

Low Price K3 Small Manual Precision Hand Press Arbor Press

JOBEST MACHINERY: BEST-QUALITY, BEST-PRICE, BEST-SERVICE !!! SEND INQUIRY
SEND US INQUIRY , GET VALID QUOTATION AND NEWEST CATALOG