- Product Details
- {{item.text}}
Quick Details
-
Product name:
-
Dust online monitoring system
-
Measuring range:
-
(0~10000)μg/m³
-
Error value:
-
MPE:±20%
-
Sampling flow:
-
16.67L/min
-
Particulate separation plant:
-
Impact cutter, cyclone cutter (PM2.5)
-
Warranty period:
-
1 Year
-
Power supply:
-
AC220V 50Hz
-
Protection:
-
IP55
-
Detection parameters:
-
dust, noise, temperature, humidity, atmospheric pressure
-
parameters:
-
wind speed and direction (optional configuration)
Quick Details
-
Warranty:
-
1 Year
-
Place of Origin:
-
Hebei, China
-
Brand Name:
-
Dengyan
-
Product name:
-
Dust online monitoring system
-
Measuring range:
-
(0~10000)μg/m³
-
Error value:
-
MPE:±20%
-
Sampling flow:
-
16.67L/min
-
Particulate separation plant:
-
Impact cutter, cyclone cutter (PM2.5)
-
Warranty period:
-
1 Year
-
Power supply:
-
AC220V 50Hz
-
Protection:
-
IP55
-
Detection parameters:
-
dust, noise, temperature, humidity, atmospheric pressure
-
parameters:
-
wind speed and direction (optional configuration)
Product Description
|
Technical Indicators
|
|
|
|
Main parameter
|
Technical indicators
|
|
|
Measuring range
|
(0~10000)μg/m³
|
|
|
Error value
|
MPE:±20%
|
|
|
Sampling flow
|
16.67L/min
|
|
|
Particulate separation plant
|
Impact cutter, cyclone cutter (PM2.5)
|
|
|
resolution ratio
|
0.1μg/m³
|
|
|
Calibration film reproducibility
|
≤±2%Nominal value
|
|
|
It is consistent with the linear regression of the reference method
|
The slope：1±0.15
|
|
|
|
intercept：（0±10）μg/m³
|
|
|
|
The correlation coefficient：≥0.95
|
|
|
Calibration method
|
Standard film calibration
|
|
|
Humidity control
|
(30~50)%RH can be set
|
|
|
Data storage capability
|
300,000 records
|
|
|
The USB interface
|
Usb flash drive data export is supported
|
|
|
Remote data query
|
With DTU module, it can query the working status of the instrument remotely and transmit real-time measurement data
|
|
|
Fault alarm
|
Real-time display of fault alarm
|
|
|
Inlet pipe heating
|
Dynamic heating of the intake pipe
|
|
The dust On-Line monitoring system (β -Ray) is an all-weather outdoor automatic monitoring terminal, which consists of a data acquisition platform and a data transmission platform. The data acquisition platform can be extended to a variety of sensors, realizing the monitoring function of different concentrations of particulate matter in the air, temperature and humidity, noise, atmospheric pressure, wind direction and speed. It is made of steel material, can adapt to the all-weather complex environment, with electronic compatible GRADE A design, and adopts IP55 dustproof, splash proof design, perfect function, high system integration, strong and durable, can work reliably in A variety of complex environment. The device is equipped with internal temperature control system Of the case, and can work at the external ambient temperature of (-30 ~ 55)℃.
1, modular design, low failure rate, easy maintenance, strong expansibility;
2, intelligent design, with fault alarm and fault self-diagnosis function;
3. Different cutter heads can be selected to measure the concentration of TSP, PM10 and PM2.5 in real time;
4, using β -ray absorption method to directly measure the mass concentration of particles, not affected by seasonal changes, without correction, all-weather real-time to provide accurate data;
5, the instrument adopts sampling and detection with the same position detection, fundamentally solve the measurement error caused by moving paper tape;
6. Accurate humidity control of sample gas: intelligent heating humidity control technology is adopted to reduce the influence of humidity of sample gas on measured data;
7, the use of high-quality detector, stable measurement, safe and reliable, accurate data;
8, sampling data automatic memory, automatically save the current data after power failure, the instrument can continue to sample after the call;
The online dust monitoring system (β -ray) uses β -ray to detect the concentration of particulate matter, and uses low energy C-14 as the β -ray source. The quality of particulate matter collected on the filter paper is calculated according to the variation of β -ray passing through the clean filter paper and collecting the filter paper with particulate matter, and then the concentration of particulate matter in the air is obtained. The instrument is widely used to measure the concentration of particulate matter in the ambient air, such as TSP, PM10 and PM2.5 (with different sampling cutters). The overall design of the instrument is reasonable, beautiful, easy to use, easy to maintain.
|
Working temperature
|
-30～55
|
Degree Celsius
|
|
Relative humidity
|
0～95
|
%RH
|
|
Atmospheric pressure
|
80～110
|
kPa
|
Detailed Images
Company Introduction
Hebei Dengyan Technology Co., Ltd is a high-tech enterprise focusing on the research, development, production and sales of environmental testing products and safety monitoring products. It is committed to the development and application of new technologies in the fields of dust monitoring, solid material measurement and gas concentration detection, as well as the production and sales of new products. Our company has developed a number of independent product series which is favored by the demanding enterprises.
FAQ
Q: How long will you give me the reply?
A: We will contact you in one hour as soon as we can.
Q: Could I visit your factory?
A: Sincerely invite you to visit our factory.
Q: How about the quality of the managements?
A: We have a complete quality control system , all of our products will be fully pre-inspection by QC departments before shipping
to you. We have the certification of ISO,CE we could send the certification test of our company to you.
Q: What is your terms of payment?
A: We accept T/T, PayPal, Western Union, Credit Assurance.
Q: What is the lead time?
A: Sample needs 2-5 days,We usually ship by DHL, UPS, FedEx or TNT, mass production time needs 7-15 days for order.
The specific price is subject to the parameters, please contact us for the quotation.
A: We will contact you in one hour as soon as we can.
Q: Could I visit your factory?
A: Sincerely invite you to visit our factory.
Q: How about the quality of the managements?
A: We have a complete quality control system , all of our products will be fully pre-inspection by QC departments before shipping
to you. We have the certification of ISO,CE we could send the certification test of our company to you.
Q: What is your terms of payment?
A: We accept T/T, PayPal, Western Union, Credit Assurance.
Q: What is the lead time?
A: Sample needs 2-5 days,We usually ship by DHL, UPS, FedEx or TNT, mass production time needs 7-15 days for order.
The specific price is subject to the parameters, please contact us for the quotation.
Hot Searches
