SW520D Tilt Module Tilt Sensor Module Tilt Switch Angle Module Switch

Module Features: 1. The high-sensitivity angle switch SW-520D is used as the sensor. You can also use the tilt sensor with other functions in the sensor link below. If you need it, please apply for the change, and the corresponding price will also be changed: http://fcswitch.taobao.com/ search.htm?scid=528059724&scname=vce2yLSruNDG9w%3D%3D&checkedRange=true&queryType=cat 2. Comparator output, the signal is clean, the waveform is good, the driving ability is strong, more than 15mA. 3. Working voltage 3.3V-5V 4. Output form: digital switch output (0 and 1) 5. There are fixed bolt holes for easy installation 6. Small board PCB size: 3.2cm x 1.4cm 7. Use a wide voltage LM393 comparator Module Instructions: 1. For the wiring of this module, please refer to the wiring diagram below for detailed instructions; 2. The switching quantity output by the module depends on the on and off of the angle switch. When the angle switch is off, DO outputs a high level, and when the angle switch is on, DO outputs a low level; 3. The output terminal can be directly connected to the single-chip microcomputer, and the high and low levels can be detected by the single-chip microcomputer, thereby detecting the angle change; 4. The output terminal can directly drive the relay module, which can form a high-power angle switch to protect the automatic power-off function of electrical equipment and other products when they are dumped.