Modulating Water Valves and Bulb Wells - TTP Accessories / API HEAT TRANSFER

	Modulating Water Valves and Bulb Wells These modulating valves regulate the flow of water to the heat exchanger to maintain a desired exiting oil temperature. They open automatically when temperature increases at the sensing bulb. No external power source is required to actuate the valve. Not to be used for salt water service. All stock valves are supplied with a drilled and tapped internal by-pass in the regulator body. A solid plug is installed in this hole for 100% shut-off. A drilled orifice plug is packed in an envelope with each valve for field installation, if continuous minimum flow is required.
	Forged Brass Y-Strainer Constructed of heavy duty forged brass, TTP Y-Strainers have a temperature range of -10°F to 250°F and are suitable for 600 WPG service, 150 PSI WSP, with female X female connection. Screwed caps are straight threaded with PTFE gaskets. 304 Stainless steel 50 mesh screen ¼" - 1" or 304 Stainless steel 20 mesh screen 1¼" - 2".
	Three-Way Thermostatic Valves TTP heavy duty thermostatic valves operate in a wide range of temperatures and in any position. Valves are compact, self-contained and tamper-proof. Acceptable for oil or water service and available with ½", ¾", 1", 1½" & 2" NPT Ports*
	Thermal Bypass Assembly This thermal bypass valve is ideally suited for hydrostatic drive circuits which require fast warm-up, controlled fluid temperature, and low return line back pressure. When installed in the return line of a hydraulic circuit that employs an oil cooler, this device will modulate fluid temperature by either shifting return line flow through the cooler, or bypassing directly to the reservoir. A built-in pressure relief function automatically relieves excess pressure to the reservoir should the cooler become restricted and resultant pressure drop become too high for the cooler circuit.
	Electronic Temperature Control & Bulb Well Assembly (AC) This is a line voltage single-stage electronic temperature control with single-pole, double-throw relay output and LED indication. It is designed with heating or cooling modes of operation, adjustable differential, and an interchangeable temperature sensor. The control couples electronic accuracy with remote sensing capability in a NEMA 1 high-impact plastic enclosure suitable for surface or DIN-rail mounting.
	Thermostatic Temperature Controller (DC) This controller was designed to mount on the cooler without requiring extensive wiring or plumbing. It provides accurate temperature control by cycling the cooling fan(s) to maintain desired oil temperature. Operates at 12 or 24 volts with adjustable temperature settings range from 100°F through 210°F. Temperature sensor, wiring for remote manual override and mounting hardware included.
	Temperature Sensors Sensors have a 303 stainless steel housing with a 1,000 PSI operating pressure. Normally open, sensor is closed on temperature rise. Contact rating of 6 AMPS at 120 VAC and 4 AMPS at 240 VAC.
	Electronic Temperature Sensor Sensors have a measuring range of -13 - 284 °F (-25 - 140 °C). The unit generates 2 output signals: 1 x NO + 1 x NC with separately adjustable switch points. Process connection is 1/4" NPT. Sensor Port Adapters and optional Bulb Wells are available.
	Electronic Temperature Sensors Used to measure temperature on the primary heating pipe circuit, these low cost, simple set-up sensors are particularly suitable for automatic adjustment pumps. Operates with an immersion thermostat, measuring temperature with a liquid filled sensing element. Comes complete with waterproof protection pocket.
	MAGHEX Fan Controller This compact, programmable combined sensor and controller is designed to mount directly to MA Series heat exchangers and is a low-cost alternative to complex control systems. It provides accurate temperature control by cycling the electric cooling fan to maintain desired oil temperature. A single housing reduces wiring and mechanical installation. The MAGHEX magnetic wand is used to set up and program the sensor. LEDs indicate the oil temperature setting. The MAGHEX operates as either a single or dual fan controller or a PWM variable fan controller. Includes pre-wired connector to fan.
	Compressed Air Separators: S-50 and S-100 Models Two Models: One has a built-in automatic float style drain, the other has a 1/8" NPT connection with manual shut off valve. Both have a rugged cast zinc housing and are equipped with quick disconnect bowls for easy service.
	Compressed Air Separators: S-200 through S-1700 Models Four models are available to fit most applications. Unique high efficiency design provides wide SCFM capacity range without loss in performance. Sturdy, lightweight aluminum construction for long dependable service. NPT threaded drain connection for installation of an electronic, manual or automatic float style drain. Low differential pressure at maximum flow ratings. Externally and internally epoxy painted for maximum corrosion protection.
	Compressed Air Separators: Model S-2600-M/S-2600-4F These separators have 1500 through 3500 SCFM capacity. Consult factory for details on larger models through 16,000 SCFM.
	Automatic Float Drain FD-25 and FD-50 Models With two economical models to fit most applications, this float drain has a rugged zinc cast housing and is equipped with quick disconnect bowls for easy servicing.
	Flexible Metal Hose Designed to isolate damaging vibration, dampen noise and absorb thermal expansion from pumps and compressors to other related equipment. Hose is of corrosion resistant type 304 stainless steel. Connectors are carbon steel schedule 40 external NPT with hex nut attachments on both ends for easy installation. Couplings are welded to assure dependable leak free operation.
	Foot Mounting Bracket This Foot Mounting Bracket is optional for BPSW and BPW Series (except 8x3 plates) and is constructed of Carbon Steel.

• 100% rugged bar and plate construction
• Up to +400 HP of heat removal from hydraulic oil
• Highest performing internal turbulator for maximum performance
• Low-clogging / easy maintenance air side cooling fins

STANDARD PRODUCT OPTIONS

• 12 or 24 volt DC fans
• Hydraulic fan motor drive
• Built-in pressure bypass (30 or 60 psi for cold start-up)
• Heresite coating for offshore or corrosive environment operation

CUSTOMER FOCUSED AND DRIVEN

• All catalog product is available with short lead-times
• Expert application engineers available to select and size the right product for your application
• Custom designs are available

INDUSTRY APPLICATIONS

Our oil coolers are used in a wide variety of mobile applications across the globe.

• Commercial duty lawnmowers
• Municipal street cleaners
• Hydrostatic drives
• Tow-behind compressor lube cooling
• Construction equipment
• Underground mining
• Engine oil cooling

Thermal Transfer Products Copper Tube and Fin Mobile Hydraulic Oil Coolers

API Heat Transfer's full line of Thermal Transfer Products standard mobile oil coolers is proven to stand-up in some of the toughest off-road environments. Our oil coolers are available with a wide variety of standard options to best suit each application and offer maximum performance.

COPPER TUBE AND FIN PRODUCT HIGHLIGHTS

• Aluminum or Steel fins available
• Up to +100 HP of heat removal from hydraulic oil
• Cost effective, industry proven designs
• Large range of standard sizes

STANDARD PRODUCT OPTIONS

• 12 or 24 volt DC fans
• Hydraulic fan motor drive
• Built-in pressure bypass (30 or 60 psi for cold start-up)
• Heresite coating for offshore or corrosive environment operation

CUSTOMER FOCUSED AND DRIVEN

• All catalog product is available with short lead-times
• Expert application engineers available to select and size the right product for your application
• Custom designs are available

INDUSTRY APPLICATIONS

Our oil coolers are used in a wide variety of mobile applications across the globe.

• Commercial duty lawnmowers
• Municipal street cleaners
• Hydrostatic drives
• Tow-behind compressor lube cooling
• Construction equipment
• Underground mining
• Engine oil cooling

S-BAR™ is the most affordable, high-flow cooling technology on the market today.

• A high-strength automotive style core design
• Durable, multi-row tube to header plate design
• Engineered for use in applications with higher temperatures and heat loads
• A lightweight, reliable and cost-effective aluminum solution

Our products perform-AIRTECH

Whether you're looking for a custom heat transfer solution (our specialty) or a more standard product, you’ll find what you need right here. That's because we offer the broadest range of heat transfer products available. And if you don’t find the solution you’re looking for, let's talk so our team of experts can create it.

Engine Cooling Systems

API Heat Transfer is your global source for engine cooling solutions. We’re equipped to offer unparalleled engine cooling performance to meet the rigorous requirements of mobile and industrial customers worldwide.

We offer an array of internal and external fin configurations that produce some of the most efficient air-cooled heat exchange cores in the industry, so your engine has more power to perform, even under the harshest conditions.

We focus our engineering expertise on the markets you serve. By understanding your customer applications, we’re able to offer a broad spectrum of components and complete engine cooling systems designed to fit the needs of engine markets across the world.

OUR TECHNOLOGIES.

API Heat Transfer offers the broadest, most complete air-cooled product lines available.

• CAB or vacuum-brazed aluminum
• Bar-plate
• Micro-channel
• Tube and header
• TBAR
• Copper-brass
• Mechanical-bond
• Soldered
• Bolted tank

API heat transfer

Five brands.
One answer for heat transfer.

With a legacy of innovation dating back to 1879, our brands are known the world over as leaders in their respective fields. They provide our customers with the technologies and product portfolio needed to handle any heat transfer project. From custom to pre-engineered designs, API Heat Transfer offers comprehensive solutions – all from one company.

Airtech:

Industrial air cooled heat exchangers

Airtech heat exchangers are available in bar and plate, tube and header, and micro-channel constructions. Airtech coolers offer unparalleled performance in a rugged yet compact and lightweight package for industrial applications.

Basco:

Shell and tube heat exchangers

Basco heat exchangers include a full range of custom-engineered and commercial standards. Available in a wide variety of materials, custom solutions are made to meet the most stringent specifications as well as all international pressure codes. Designs include TEMA types, extended surface, hairpins, surface condensers, and a full line of on-engine water-cooled charge-air-coolers and heat exchangers.

Covrad:

Engine cooling systems

Established in 1884, Covrad products employ the latest aluminum and copper-brass air cooled technologies to produce custom engine cooling systems for the full range of diesel-powered equipment.

Schmidt:

Plate heat exchangers and thermal systems

Introduced in 1879, Schmidt plate heat exchangers include industry-leading gasketed (special and standard gaskets), all-welded, semi-welded, double-wall, and brazed products for most industrial markets.

Thermal process systems include evaporation systems, dealcoholization plants, and pasteurizers used for thermal treatment of various liquids in all industries.

TTP:

Heat exchangers sold through distribution

TTP offers a complete portfolio of pre-engineered products available from API Heat Transfer, sold through a global network of distribution partners . This includes a broad range of fluid power related heat exchangers (oil-water, oil-air, air-air) utilized in mobile and industrial applications, along with custom engine cooling modules.