QTJ4-40 concrete block making machine test 6 inch solid block for Ghana Nigeria Kenya Tanzania

QTJ4-40 concrete block making machine test 6 inch solid block for Ghana Nigeria Kenya Tanzania

QTJ4-40 concrete block making machine is one hot sale machine model, it is manual block machine, suitable for making all types of hollow blocks, solid block, pavers, curbstones and so on. it is designed for small scale block project.

QTJ4-40 block machine is one of our designed small block making machine. With less power, it achieves super strong vibration. It adopts full automatic spiral material laying method, so the material in the mould is well-distributed. With simple operation and high productivity, when producing hollow blocks, it has an advantage over the large hydraulic block machines.

Main technical parameters:

Raw Materials: crushed stone, sand, cement, dust and coal fly ash, cinder, slag, gangue, gravel, perlite, and other industrial wastes.
Applied Products
concrete blocks: solid/hollow/cellular masonry products, paving stones with or without face mix, garden and landscaping products, slabs, edgers, kerbstones, grass blocks, slope blocks, interlocking blocks, etc.
Applied Fields : widely used in buildings, road pavings, squares, gardens, landscaping, city constructions, etc

Main Advantages:

1.Small invest, high returns

2.Manual Operation, Easy Maintenance.
3.Can produce different blocks by changing moulds.
4.The mould are treated by high temperature carburizing. The service life three times longer than normal one

5.Suitable for Small-scale block factory and New Starters

Production capacity :

QTJ4-40 concrete block machine produce different type blocks just changing moulds, It can produce hollow/solid blocks, riverside bricks, revetment bricks, square bricks, grassed bricks ,paver, interlocking blocks,curbstone,colored paver,etc with different moulds.If you have special shape,our engineer also can special design mould for you.

	Block	Size/mm	Moulding Cycle	Qty/Mould	Qty/Hour	Qty/8Hours
Hollow Block		400x200x200	35-40s	4pcs	300-360pcs	2400-2880pcs
Hollow Block		400x150x200	35-40s	5pcs	360-450pcs	2880-3600 pcs
Hollow Block		400x100x200	35-40s	7pcs	500-630pcs	4000-5040pcs
Hollow Block		400x150x200	35-40s	5pcs	360-450pcs	2880-3600 pcs
Poroue Block		240x115x90	35-40s	9pcs	720 pcs	5760pcs
Solid Block		240x115x53	35-40s	21pcs	1900pcs	15200pcs
Paver		225x112.5x60	35-40s	9pcs	700-800 pcs	5680-6480 pcs

Workers Number: 4-5 Workers

One Workers to load material into Mixer

One Worker to operate block machine and add pallet into block machine

One Worker to load material into block machine

One or two Workers to carry fresh blocks to Curing Sites

Factory Area: 600-1000m2

QTJ4-40 concrete block making machine test 6 inch solid block for Ghana Nigeria Kenya Tanzania

Raw materials :

Raw materials are generally cement, sand, gravels, crushed stone powder, slags, fly ash, ect, depending on customers' choice.

A. 8-10% cement, 30-40% sand, 50-60% crushed stone

B. 8-10% cement, 30% flyash, 60% sand or stone powder The diameter of sand and stones need to be less than 15mm, if produce paver interlocking brick, need color iron.

Customer Site:

Packing shall be wrapped with plastic film or according to the customer's require.

1. The whole brick machine production line is mainly full container shipping,

2. Wrap the whole brick machine with plastic film before shipment to prevent water or moisture,

3. Then load the brick machine into the container with a forklift,

4. During loading, tighten the machine with the reinforcing ring in the container to avoid damage caused by transportation bumps on the brick machine.