- Product Details
- {{item.text}}
Quick Details
-
Product name:
-
High Strength Mold Making Liquid RTV-2 Silicone Rubber
-
Color:
-
white liquid silicone rubber
-
Viscosity:
-
26000 cps good flowability
-
Mixing ratio:
-
100:5 easy mix silicone
-
Pot life:
-
30-45 mins working time
-
Curing time:
-
6 hrs room temperature cure
-
Hardness:
-
20-24 shore A rtv2 silicone
-
Elongation:
-
600% good elongation
-
Tensile strength:
-
4 Mpa flexible silicona rtv
-
Shrinkage:
-
0.3% low shrinkage rtv2 liquid silicone
Quick Details
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
MC Silicone
-
Model Number:
-
MCSIL-H20
-
Product name:
-
High Strength Mold Making Liquid RTV-2 Silicone Rubber
-
Color:
-
white liquid silicone rubber
-
Viscosity:
-
26000 cps good flowability
-
Mixing ratio:
-
100:5 easy mix silicone
-
Pot life:
-
30-45 mins working time
-
Curing time:
-
6 hrs room temperature cure
-
Hardness:
-
20-24 shore A rtv2 silicone
-
Elongation:
-
600% good elongation
-
Tensile strength:
-
4 Mpa flexible silicona rtv
-
Shrinkage:
-
0.3% low shrinkage rtv2 liquid silicone
Condensation Curing High Strength Mold Making Liquid RTV-2 Silicone Rubber
Liquid Silicone, Molding Silicone, RTV-2 Silicone is a two-component material, and the silicone rubber includes Part A base silicone and Part B CA30 curing agent. The Part A base silicone and Part B curing agent can cure at room temperature by a condensation reaction.
1. Good flow ability and long working time
2. Medium hardness
3. High tear and tensile strength
4. Easy de-mould from complex replica parts
5. Acid and alkali-resistance
6. Low linear shrinkage
A: Cultural relic duplication, architectural decoration, statues
B: Resin crafts
C: Lighting ornaments, candles
D: Plaster, Gypsum, Cement, Concrete decorations
F: Model design, product exploitation, etc.
1-Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
2-vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause , and no more further steps will be available
3-Pouring mold or block mold of silicone rubber
The pouring way is an easy way to make molds, it's slowly and evenly pour into the mixed silicon rubber into the square frame. After the cross linking reaction.
