- Product Details
- {{item.text}}
Quick Details
-
Application:
-
3s 4s 40a 60a Li-ion Lithium Battery
-
Series:
-
3s 4s 40a 60a Li-ion Lithium Battery
-
Features:
-
3s 4s 40a 60a Li-ion Lithium Battery
-
Mounting Type:
-
standard
-
Size / Dimension:
-
standard
-
Description:
-
3s 4s 40a 60a Li-ion Lithium Battery
-
Product name:
-
Li-ion Lithium 18650 BMS
Quick Details
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
Smart
-
Model Number:
-
3s 4s 40a 60a Li-ion Lithium Battery
-
Application:
-
3s 4s 40a 60a Li-ion Lithium Battery
-
Series:
-
3s 4s 40a 60a Li-ion Lithium Battery
-
Features:
-
3s 4s 40a 60a Li-ion Lithium Battery
-
Mounting Type:
-
standard
-
Size / Dimension:
-
standard
-
Description:
-
3s 4s 40a 60a Li-ion Lithium Battery
-
Product name:
-
Li-ion Lithium 18650 BMS
|
3S 4S series 20A/40A/60A lithium-ion battery drilling rig BMS charger protection board 18650 balanced 12V control
|
Scope of Application:
It is suitable for lithium batteries with a nominal voltage of 3.7V and a full voltage of 4.2V (including
18650, 26650, polymer lithium batteries, and no size restrictions)
18650, 26650, polymer lithium batteries, and no size restrictions)
Product Size:
41*55*3.4mm (enhanced version), 41*60*3.4mm (balanced version)
Product Weight:
8.8g (enhanced version), 9.8g (balanced version)
Charging Voltage:
12.6V~13.6V
Continuous Discharge Current (upper limit):
40A (If the heat dissipation environment is not good, please reduce the load current to use)
Continuous charging current (upper limit):
Continuous charging current (upper limit):
20A Enhanced version: suitable for electric drills with starting current below 80A and power below 170W.
Balanced version: It is suitable for electric drills with starting current below 80A and power below 170W, with equalizing charging function.
Note 1:
Note 1:
To successfully start the electric drill, you need 3pcs 10C-20C power batteries, or 6pcs 5C-10C power batteries, 0V and 12.6V connecting wires, and use copper wires of more than 3 square millimeters (no nickel sheets!! ).
Note 2:
Wiring 0V, 4.2V,8.4V, 12.6V strictly in accordance with the diagram, do not touch any components on the board when welding the wire, and do not intentionally short-circuit.
Note 3:
When the battery is welded for the first time or is being charged, as long as a single battery exceeds 4.2V, the 430 resistance will heat up and discharge (discharge to about 4.19V to stop heating). If the 430 resistor is very hot (you can't touch it when it is too hot), please check whether it is connected to the wrong wire.
If there is any questions ,please feel free to contact us .
If there is any questions ,please feel free to contact us .
More information, please visit our website:www.smart-bes.com
Q1: MOQ?
Can I just buy 1 piece?
A1: There is no MOQ in Smart.We are able to handle Small as well as large volume production with flexibility. 1 piecs is OK ,a s long as you can accept the sample price
Q2: What is your Lead time?
A2: Lead time is usually punctual here, usually 3-7days for sample , 10-15 days for mass production. For some special situation,we can also advise customer in advance to avoid any inexpectation or loss at customer side.
Q3: What's the best price you can offer?
A3: It depends on the quantity you order. The more quantity ordered, the more favorable the price will be. Both new and existing customers will enjoy corresponding discounts. Anything can be negotiated, so feel free to consult us if you have any questions.
Q4: Besides this product, what other products can you offer?
A4: We offer one-stop service for PCB/PCBA/FPC/Clone boards/stencil/membrane switch and complete components sourcing( Modules, Cable, Sensors, NTC, Aluminum heatsink, Water block,Copper tube,LCD,LED,Switches and Connectors etc.) with a wide range, good quality and reasonable prices according to your need.
Q5: Do you have any relevant certificates for this product?
A5: Yes. Our certificates are complete. If you need them, please contact our salesperson.
A1: There is no MOQ in Smart.We are able to handle Small as well as large volume production with flexibility. 1 piecs is OK ,a s long as you can accept the sample price
Q2: What is your Lead time?
A2: Lead time is usually punctual here, usually 3-7days for sample , 10-15 days for mass production. For some special situation,we can also advise customer in advance to avoid any inexpectation or loss at customer side.
Q3: What's the best price you can offer?
A3: It depends on the quantity you order. The more quantity ordered, the more favorable the price will be. Both new and existing customers will enjoy corresponding discounts. Anything can be negotiated, so feel free to consult us if you have any questions.
Q4: Besides this product, what other products can you offer?
A4: We offer one-stop service for PCB/PCBA/FPC/Clone boards/stencil/membrane switch and complete components sourcing( Modules, Cable, Sensors, NTC, Aluminum heatsink, Water block,Copper tube,LCD,LED,Switches and Connectors etc.) with a wide range, good quality and reasonable prices according to your need.
Q5: Do you have any relevant certificates for this product?
A5: Yes. Our certificates are complete. If you need them, please contact our salesperson.
Hot Searches
