- Product Details
- {{item.text}}
Quick Details
-
Model Number:
-
supersonic-v2-esc-130a
-
Size:
-
57.5 * 45 * 37 mm
-
Amperage/Maximum Burst Current:
-
130A/860A
-
Water-Resistant:
-
YES
-
Product dimension:
-
57.5 * 45 * 37 mm
-
Motor Type:
-
Brushless DC Motor
-
BEC Output:
-
7.4V / 8.4V User Selectable 6A
-
Input Voltage:
-
3~6 Cell LiPo / 9~18 Cell NiMH
-
Product Application:
-
Crawling / Surface / on-road / off-road
-
Forward/Reverse/Auto Cutoff:
-
YES
-
Connector Type:
-
single/double XT60 6.5mm female connector
-
Programmable:
-
YES
Quick Details
-
Use:
-
Vehicles & Remote Control Toys
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
Big Kylin
-
Model Number:
-
supersonic-v2-esc-130a
-
Size:
-
57.5 * 45 * 37 mm
-
Amperage/Maximum Burst Current:
-
130A/860A
-
Water-Resistant:
-
YES
-
Product dimension:
-
57.5 * 45 * 37 mm
-
Motor Type:
-
Brushless DC Motor
-
BEC Output:
-
7.4V / 8.4V User Selectable 6A
-
Input Voltage:
-
3~6 Cell LiPo / 9~18 Cell NiMH
-
Product Application:
-
Crawling / Surface / on-road / off-road
-
Forward/Reverse/Auto Cutoff:
-
YES
-
Connector Type:
-
single/double XT60 6.5mm female connector
-
Programmable:
-
YES
Product Description
DECLARATION
This is Electronic Speed Controiler (ESC) for car. High power system for RC model is very dangerous, so please read this manual carefully.Since we can't control over the correct use, installation, application, or maintenance of our products, we've no liability shall be assumed nor accepted for any damages, losses or costs resulting from the use of the product. Any claims arising from the operating, failure of malfunctioning etc. will be denied. We assume no liability for personal injury, consequential damages resulting from our product or our workmanship.
FEATURES:
1.Water-proof and dust-proof for all-weather races; (Note: please uninstall the cooling fan before using this ESC in water; Clean and dry it soon after the use for avoiding the connectors get rusty.)
2. Specially designed for RC car with excellent start-up, acceleration and linearity features.
3. Compatible with sensorless brushless motor.
4. The strong resistant current capability, excellent heat dissipation.
5.Multiple protection features: Low voltage cut-off protection fo lithium or nickel battery / ESC Over-heat protection / Motor Over-heat protection/Throttle signal loss protection / Motor blocked protection.
6. Built-in switch-mode BEC 7.4V or 8.4V/6A for usage with high torque and high voltage servos.
7. Low voltage cut-off protection the motor emits"Beep-Beep" and the LED flashes. ESC and MOTOR Over-heat protection the LED flashes. ESC Over-heat protection the LED oneslow flash and two fast flahses. MOTOR Over-heat protection the LED oneslow flash and one fast flahses.
8. Automatic shutdown after two minutes of low-voltage protection, and automatic shutdown without operation for 5 minutes in other cases.
9. Easily programmed and compatible with pocket-sized program card.

CONNECTION DIAGRAM:
lnsert the ZH1.27 male cable into the TEMP interface at the end of the motor to realize the motor over heating proteclion function.
Model
|
Supersonic V2 130A
|
Supenonic V2 160A
|
|
Cont. Current/
Burst Current
|
130A/860A
|
160A/1080A
|
|
Motor Type
|
Sensorless Brushless Motor
For 4S Lipo or 12 cells NiMH:
1.on-road:40xx-size or smaller motor with the KV<3000.
2. off-road/Buggy/Monster 40xx-size or smaller motor with the KV<2500.
For 6S Lipo or 18 cells NiMH:
1. On-road:40xx-size or smaller motor with the KV<2500.
2. Off-road/Buggy/Monster:40xx-size or smaller motor with the KV<2000.
|
Sensorless Brushless Motor For 4S Lipo or 12 cells NiMH:
1.on-road:42xx-size or smaller motor with the KV < 3000.
2. off-road/Buggy/Monster 42xx-size or smaller motor with the KV<2500.
For 6S Lipo or 18 cells NiMH:
1. On-road:42xx-size or smaller motor with the KV<2500.
2. Off-road/Buggy/Monster:42xx-size or smaller motor with the KV<2000.
|
|
Suitable Car
|
1/8 car
|
1/8 car & 1/7 car
|
|
Resistance
|
0.00035ohm
|
0.00028ohm
|
|
Battery
|
3~6 cells Lipo /
9~18 cells NiHM
|
|
|
BEC Output
|
7.4V/8..4V 6A(Switch mode)
|
|
|
Dimensions/Weight
|
57.5 * 45 *37 mm /126g
|
57 * 45 * 37 mm / 150g
|
OPERATION STEPS
1.Connect BEC wires with thereceiver; Connect motor wires with ESC.
2.Turn on the transmitter.
OPERATION STEPS
1.Connect BEC wires with the receiver; connect motor wires with ESC.
2.Turn on the transmitter.
3. Connect battery pack with ESC then switch on the ESC.
4.When the connection of motor and battery is finished, the motor emits"Beep- Beep"tone.
5.When the throttle stick is in the neutral position, the motor re-emits "Beep-Beep" tone.
6. Make two sounds with the BEC voltage of 7.4V and three sounds with the BEC voltage of 8 .4V. Force BEC output 7.4V when BEC isset to 8.4V input to 2S lithium battery.
7. BEC voltage change: switch off the ESC, connect short-circuit chip to BEC turn on the ESC and wait for 3S and unplug short-circuit chip. Or set the BEC voltage with the programming card.
8. Set up Throttle Range (After setting, replace the transmitter and be sure to reset it. If you haven' t Set up Throttle Range, you don't need to set it.)①丶Turn on the transmitter, and set parameters (of the throttle channel) EPA to 100%, Set the TRIM.TH to 0. ②丶Connect all the wires. ③丶Turn on the transmitter after pulling the Throttle forward direction to the maximum. ④丶 Press the power switch button and hold it until the motor emits twice " Beep-Beep", then release the switch button and enter the programming mode. ⑤丶The throttle hold forward direction to the maximum and waits for the motor emits "Beep-Beep" and LED flashes one time. ⑥丶The throttle returns and wa
its for the motor emits "Beep- Beep"and LED flashes one times. ⑦丶The throttle is pushed back to the maximum and waits for the motor emits "Beep-Beep" and LED flashes one time ⑧丶 The throttle returns to the center again and the throttle travel setting is complete.
TROUBLE SHOOTING
1. lf after power on, motor can't work,no sound is emitted, please check the connections between battery pack and motor.
2. lf after power on,LED flashes, please check the voltage of battery pack, which should be from 6V~26V.
3. lf the motor emits a "Beep-Beep" tone Only, please check all the connections: BEC wires, transmitter and receiver, throttle signal wires, etc. please check the transmitter TH.TRIM and adjust it to the motor re-emits "Beep-Beep" tone.
4. If the car can't be speed up,please check either voltage of battery pack is too low or the temperature of ESC is too high. If the voltage of the battery pack is too low, please replace the battery pack. If thetemperature of ESC is too high, please check all connections. if not, please push the button EPA on your remote control.
5. If the car stops suddenly while in working state, please check the motor's connections, and the roadblock.
6. If the car runs in the opposite directtion, which the transmitter is a available, please swap two wire connections between the ESC and the motor.

PRO-LEVEL DRAG BRAKE ADJUSTMENT
The Big Kylin 130 amp Brushless programmable ESC features a huge range of drag brake adjustability, allowing for drivers to expertly tune their models depending on their driven train and vehicle weight. Featuring fine levels of adjustability for Drag Brake Percentage and Drag Brake Rate that is perfect for tuning your crawlers and scalers for expert level rock crawling performance.

WATERPROOF
The all-weather, waterproof design of programmable ESCs allows them to perform in nearly any terrain under almost any conditions. Firma ESCs keep you going through dust, gravel, snow, and water.

PROGRAMMING OPTION
only one programming option is available. Using the
KS-100010-14
ESC Programming Box, you can easily change settings on the
trail to suit driving conditions.
trail to suit driving conditions.
CUSTOMIZING THE ESC
To begin, connect the ESC battery wires to a charged battery, then connect the BEC wire 3pin wire to the program card "S+-" port (3pin port). Turned on the ESC , the programming card will automatically read the ESC settings, and the setting items of the programming card will display 1 to 15 successively, indicating that the connection is successful. You can start programming ESC. (if it is not displayed, it means that the connection is unsuccessful, please try to turn off ESC repeatedly, reconnect the programming card and turn on ESC again until it is successful)
TIPS! Program card is done using the 4 buttons below on the led, The function of each button start from right hand side are ITEM, VALUE, OK and RESET.
Please refer to the menu below to program the function settings you need.
"ITEM" button------go to next item to select.
"OK" button--------go to confirm your select. "RESET" button----go back to factory setup.
"VALUE" button----go to next value select.
* Please see manual for Waterproof Usage Guidelines
** See compatibility chart for more information.
** See compatibility chart for more information.
Program Manual
Refer to the following product
The BigKylin 110A waterproof ESC provides consistent power control and is 3~6S LiPo ready.
Fitted with super-reliable XT-60 connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the BigKylin ESC has over voltage protection, and a two-stage LiPo cut off for added cell management.
The fitted 10AWG high-quality wires and 6V BEC unit are combined with a three mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.
Recommended battery specification: 5000mAh - 35C minimum - Per battery pack
3S, 4S and 6S LiPo Compatibility
Recommend Products
Company Introduction
Daqi Motor designs, manufactures and distributes high performance hobbyist model driving systems to offer solutions for precise driving and exacting motion control applications.
With over 15 years of experience, we harness sophisticated machinery and state-of-the-art equipment to forge a strong manufacturing base in Shenzhen, China, giving us the ability to customize products that are based on the needs of our customers.
We have a global presence with sales offices in Taiwan, Singapore and America, and we are supported by agents in Europe and Australia, allowing us to provide top notch service to our clients worldwide.
Our Advantages
Product packaging && shipping
FAQ
Hot Searches