- Product Details
- {{item.text}}
Quick Details
-
Use for:
-
MiSTer IO Board Compatible
-
Feature:
-
KEMET High Quality Capacitors
-
Suitable For:
-
Terasic DE10-Nano FPGA Board
-
Capacity:
-
128MB SDRAM
Quick Details
-
Model Number:
-
A1005003022957619
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
SX
-
Use for:
-
MiSTer IO Board Compatible
-
Feature:
-
KEMET High Quality Capacitors
-
Suitable For:
-
Terasic DE10-Nano FPGA Board
-
Capacity:
-
128MB SDRAM
All products will be checked carefully and packed in good condition with high quality carton before shipping.
We e-mail all customers with tracking. information immediately after the shipment for status tracking.
We e-mail all customers with tracking. information immediately after the shipment for status tracking.
Buyer Notice:Customs fees and import duties are buyer's responsibility.
Product Description
Specification
Description:
l for Mister-USB Hub Board: This is an optional add-on USB Hub for convenient USB device connections. With this board the for MiSTer has an extra seven USB ports that fit snugly under the existing chassis. The USB Bridge seamlessly connects to the DE10-Nano SoC board without any additional wires.
l for Mister-USB Hub Board: This is an optional add-on USB Hub for convenient USB device connections. With this board the for MiSTer has an extra seven USB ports that fit snugly under the existing chassis. The USB Bridge seamlessly connects to the DE10-Nano SoC board without any additional wires.
Features:
1, Upstream micro USB port
2, 7 USB ports.
3, 5V DC connection.
4, Based on FE2.1 chip
l for MiSTer IO Board: The for MiSTer IO Board is an optional expansion that plugs on top of the for Te rasic DE10-Nano SoC. It adds the following features to the for MiSTer Platform:
VGA Connector. Check Analog video output compatibility
3.5mm Audio Jack with TOSLink
3 Buttons
3 Status LEDs
Secondary SD card (for some cores)
FAN for cooling the FPGA
Expansion connector (in the form of USB 3.0 connector, but it's not USB!)
Additional connectors to integrate the for MiSTer into cases.
l for Mister-SDRAM V2.2 board: This Extra Slim (XS) v2.2 board provides 32MB of SDR SDRAM memory for cores requiring a large (>512KB) of memory. Although the DE10-Nano has built in DDR3 RAM, it has a high latency and is not suitable for the timings required of retro EDO DRAM. So if a core requires precise memory timings, then the onboard DDR3 cannot be used.All our Extra Slim
(XS) SDRAM boards have been checked under a microscope to ensure no solder bridges are present, then each board is tested at 150Mhz for at least half an hour. Every one of my boards uses the higher quality Winbond chips, high quality KEMET branded capacitors are used on each board.You can be confident knowing each Extra Slim (XS) v2.2 SDRAM board has been tested for over half an hour at 150MHz using the SDRAM Board Test Service Core . We also test each with a number of console cores in games to ensure no issues are present.
Expansion connector (in the form of USB 3.0 connector, but it's not USB!)
Additional connectors to integrate the for MiSTer into cases.
l for Mister-SDRAM V2.2 board: This Extra Slim (XS) v2.2 board provides 32MB of SDR SDRAM memory for cores requiring a large (>512KB) of memory. Although the DE10-Nano has built in DDR3 RAM, it has a high latency and is not suitable for the timings required of retro EDO DRAM. So if a core requires precise memory timings, then the onboard DDR3 cannot be used.All our Extra Slim
(XS) SDRAM boards have been checked under a microscope to ensure no solder bridges are present, then each board is tested at 150Mhz for at least half an hour. Every one of my boards uses the higher quality Winbond chips, high quality KEMET branded capacitors are used on each board.You can be confident knowing each Extra Slim (XS) v2.2 SDRAM board has been tested for over half an hour at 150MHz using the SDRAM Board Test Service Core . We also test each with a number of console cores in games to ensure no issues are present.
Feature:
1, Suitable For Terasic DE10-Nano FPGA Board
2, Winbond W9825G6KH-6 Chip
3, KEMET High Quality Capacitors
4, Tested For Over Half An Hour @ 150MHz
5,for MiSTer IO Board Compatible
l for MisTer SDRAM V2.5 Board: This Extra Slim (XS-D) v2.5 board provides 128MB of SDR SDRAM memory for cores requiring a large(>512KB) of memory including the Neo Geo core. Although the DE10-Nano has built in DDR3 RAM, it has a high latency and is not suitable for the timings required of retro EDO DRAM. So if a core requires precise memory timings, then the onboard DDR3 cannot be used.Every one of our boards uses the high quality Alliance memory paired. You can be confident knowing each 128MB SDRAM Extra Slim (XS-D) v2.5 board has been tested for over an hour at 140 MHz .We have also tested each with the Neo Geo console core, Acorn Archimedes (Archie) core, Game Boy Advance core, Sega Mega CD core and in Neo Geo games which require a 128MB module to play this ensures no issues are present.
Feature:
1, Suitable For Terasic DE10-Nano FPGA Board
2, 128MB SDRAM Capacity
3, 100% Of The Neo Geo ROM Library Playable
4, Alliance Memory AS4C32M16SB-7TIN Chips
5, for MiSTer IO Board Compatible
6, Fully Assembled & Tested
Specification:
l Types: for Mister-FPGA 32MB Set, for Mister-FPGA 128MB Set, for Mister-USB Hub V2.1, Mister-FPGA-IO Board + Fan, for
Mister-FPGA-IO Board + NOCTUA Fan (Optional)
Package Option:
l 1 x for Mister-FPGA 32MB Set
Or
l 1 x for Mister-FPGA 128MB Set
Or
l 1 x for Mister-USB Hub V2.1
Or
l 1 x for Mister-FPGA-IO Board + Fan
Or
1 x for Mister-FPGA-IO Board + NOCTUA Fan
|
|
|
|
|
|
||||
Packing & Delivery
Company Profile
Hot Searches
