Explore More Products
- Product Details
- {{item.text}}
Quick Details
-
Product name:
-
fingerprint padlock
-
Material:
-
Zinc alloy + stainless steel
-
Style:
-
Lock Cylinder Hole
-
Reaction time:
-
less than 0.5s
-
USB charge:
-
built-in 100mAh lithium battery, can be unlocked up to 1000 times
-
Memory capacity:
-
12 fingerprint sets
-
Weight:
-
100g
-
Size:
-
50mm*30mm*13mm
-
Applicable to:
-
bag, luggage, warehouse, door, cabinet, cargo, etc.
-
Fingerprint recording:
-
support up to 12 fingerprints recording
Quick Details
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
CareLock
-
Model Number:
-
SP-PL001M
-
Product name:
-
fingerprint padlock
-
Material:
-
Zinc alloy + stainless steel
-
Style:
-
Lock Cylinder Hole
-
Reaction time:
-
less than 0.5s
-
USB charge:
-
built-in 100mAh lithium battery, can be unlocked up to 1000 times
-
Memory capacity:
-
12 fingerprint sets
-
Weight:
-
100g
-
Size:
-
50mm*30mm*13mm
-
Applicable to:
-
bag, luggage, warehouse, door, cabinet, cargo, etc.
-
Fingerprint recording:
-
support up to 12 fingerprints recording
Electronic Safe lock Waterproof Smart Fingerprint Padlock for luggage bag with cable Anti-Theft Safety Lock
fingerprint padlock
|
Material |
Zinc alloy+stainless steel |
|
Waterproof level |
IP2 real waterproof |
|
Style |
Lock Cylinder Hole |
|
Reaction time |
less than 0.5s |
|
USB charge |
built-in 100mAh lithium battery, can be unlocked up to 1000 times |
|
Memory capacity |
12 fingerprint sets |
|
Weight |
100g |
|
Size |
50*30*13mm |
|
Applicable to |
bag, luggage, warehouse, door, cabinet, cargo, etc. |
|
Fingerprint recording |
support up to 12 fingerprints recording |
|
Fingerprint recognize. |
|
| 1. Record fingerprint |
| Input the fingerprint of administrator: The first fingerprint entered by the new lock is the administrator. Press the setup button, blue light is on, touch the fingerprint piece with your finger at this time, the blue light flashes one time if successed, the red light flashes one time if failed. Repeat same finger touch with the fingerprint piece 12 times, the blue light flashes if ok, the red light flashes if not ok. |
| Input the fingerprint of user: Press the setup button, blue light is on, input the fingerprint of administrator, the blue light flashes and light up. If it is a non-administrator fingerprint, the red light flashes one time, and the blue light up, cannot enter a new fingerprint at this time, n eed to re-use the administrator's fingerprint match, if the contact match fails 4 times, the entry mode will be exited, then need to enter another person's fingerprint or another finger's fingerprint 12 times (As an new administrator), the blue light flashes if ok, the red light flashes if not ok. Repeat the above steps for each additional fingerprint, total 10 fingerprints can be recorded. (Note: It is recommended to touch the fingerprint piece with your finger turns 90° every time, to ensure 360° has fingerprint data, then unlock more sensitive.) |
| 2. Delete fingerprint |
| Press and hold the setting button for about 5 seconds, the blue light is on, e nter the administrator fingerprint at this time, after confirming ok, the blue light flashes twice, t he red light flashes 10 times and stop, at this point all fingerprints are deleted, r estoring the factory state. |
| 3. Unlock |
| Put the finger which successfully entered on the fingerprint piece, the blue light is on, the motor rotates, the blue light flashed, then you can take out the lock rope. If put an uninvited finger on the fingerprint piece, the red light will flash one time; If the fingerprint is incorrect 4 times, it will start sleep mode, lights off. |
| 4. Lock |
| Insert the lock rope to lock hole, touch and contact switch, the motor reverse, then locked, blue light is off, enter sleep mode. |
| 5. Low voltage prompt |
| When the voltage is less than 3.3V, the green light flashes when unlocking, it indicates that charging is required. |
| 6. Charging |
| Charge by inputting 5V DC on the USB port, charging current 150mA, red light is on when charging, red light is off when fully charged. |
| 7. Others |
| 1) After the fingerprint is unlocked, the blue light flashes, the motor will automatically reverse after 40 seconds, then locked. If you want to insert the lock rope into the lock hole at this time, must be unlocked with a finger that has been successfully entered. |
| 2) New lock without fingerprint, when the finger touches the fingerprint piece, the red light flashes 10 times and stop. |
| 3) Power on, the green light flashes one time. |
1. Superior quality of service, the
maximum for customers!
2. All of our products have been
inspected
before shipment, and we guarantee the cargo packed very well.
3. Support
customized logo
printing & packaging design!
4.
OEM/ODM
orders are warmly welcome!
