- Product Details
- {{item.text}}
Quick Details
-
EINECS No.:
-
231-545-4
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
Boqiao, Boqiao
-
Model Number:
-
YH9012AB, YH9012AB
-
Type:
-
Two Component, Two Component
-
Product name:
-
Potting Glue For Electronic
-
Keywords:
-
electronic potting glue
-
Viscosity:
-
40000-45000
-
Advantage:
-
Suitable High Temperate Climates
-
MOQ:
-
1 KG
-
Material:
-
Pure Epoxy
-
Packing:
-
Bottle
Quick Details
-
CAS No.:
-
67763-03-05
-
Other Names:
-
epoxy resin and hardener
-
MF:
-
mSiO2 nH2O
-
EINECS No.:
-
231-545-4
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
Boqiao, Boqiao
-
Model Number:
-
YH9012AB, YH9012AB
-
Type:
-
Two Component, Two Component
-
Product name:
-
Potting Glue For Electronic
-
Keywords:
-
electronic potting glue
-
Viscosity:
-
40000-45000
-
Advantage:
-
Suitable High Temperate Climates
-
MOQ:
-
1 KG
-
Material:
-
Pure Epoxy
-
Packing:
-
Bottle
BEFORE YOU BUY
NOTE!!!!!!
Before you place order, please contact me to confirm shipping cost!
CHARACTERISTICS
UL certificate No. -E513688
YH-9012A / B is two-component epoxy resin with low viscosity, good fluidity and good leveling. It has following characteristics:
1. Transparent: black liquid.
2. It’s low viscosity, good fluidity and easily penetrate into the product gap;
3. It Can be cured at room temperature 25℃ or medium temperature
4. After curing, It’s high hardness, high gloss like crystal, and we can see the surface is smooth and no bubbles.
1. Transparent: black liquid.
2. It’s low viscosity, good fluidity and easily penetrate into the product gap;
3. It Can be cured at room temperature 25℃ or medium temperature
4. After curing, It’s high hardness, high gloss like crystal, and we can see the surface is smooth and no bubbles.
PRODUCT RANGE
1. Widely used for transformers, sensors, buzzers, atomizers, negative ion generators, aquarium water pumps, ignition coils, power modules, electronic controllers and other electronic components;
2. Other products that require infusion sealing, packaging protection, insulation and moisture resistance.
2. Other products that require infusion sealing, packaging protection, insulation and moisture resistance.
TECHNICAL DATA
|
ITEM
|
CONDITIONS
|
YH-9012A
|
YH-9012B
|
|
Transparent
|
--
|
Black liquid
|
Brown liquid
|
|
density
|
25℃、g/cm3
|
1.72～1.82
|
1.15～1.25
|
|
viscosity
|
25℃、mPa.s
|
8000～12000
|
80～160
|
|
ITEM
|
CONDITIONS
|
DATA
|
|
Mixing ratio（A：B）
|
Weight Ratio
|
5:1
|
|
Mixed Viscosity
|
25℃
|
1600-2000mpa.s
|
|
ITEM
|
CONDITIONS
|
DATA
|
|
|
Hardness
|
SHORE-D
|
80±3
|
|
|
Volume resistivity
|
25℃、Ω.cm
|
>1.35×10
15
|
|
|
Surface resistivity
|
25℃、Ω
|
>1.2×10
14
|
|
|
Dielectric strength
|
25℃、Kv/mm
|
>25
|
|
|
Dielectric constant（50Hz）
|
|
4.80-5.30
|
|
|
Dielectric loss
|
Tδ
|
0.03-0.05
|
|
|
Tensile Strength
|
MPa
|
20-30
|
|
|
Bending strength
|
MPa
|
65-75
|
|
|
Impact strength
|
KJ/m2
|
25-40
|
|
|
Glass transition temperature
|
°C
|
80-90
|
|
|
Shelf life
|
6 months
|
|
|
Note: The above performance data is for customers' reference only, and cannot guarantee that all the above values can be reached in a specific environment. Please refer to the actual measured data when conducting.
Operative Steps
1. Weighing: In order to achieve the best performance of the product, it is recommended to use high-precision electronic weighing for accurate weighing.
2. Mixing: Mix the weighed materials A and B and stir evenly; make sure the resin on the walls and bottom of the container is fully dispersed if you mix by hand.
3. Infusion: Inject the mixed materials A and B into the objects to be infused, and cure at room temperature or medium temperature.
4. The more mixed amount, the less curing time, and may release of a lot of heat, so please pay attention to control amount. and the mixed liquid should be used up as soon as possible in case of curing in the container.
5. Before using it in large quantities, please try it in small quantities for test.
6. After injection, the glue will gradually penetrate into the gaps of the product. If necessary, please perform the second injection;
7. When it curing, please keep the room clean to prevent impurities or dust from falling onto the surface of the uncured liquid.
2. Mixing: Mix the weighed materials A and B and stir evenly; make sure the resin on the walls and bottom of the container is fully dispersed if you mix by hand.
3. Infusion: Inject the mixed materials A and B into the objects to be infused, and cure at room temperature or medium temperature.
4. The more mixed amount, the less curing time, and may release of a lot of heat, so please pay attention to control amount. and the mixed liquid should be used up as soon as possible in case of curing in the container.
5. Before using it in large quantities, please try it in small quantities for test.
6. After injection, the glue will gradually penetrate into the gaps of the product. If necessary, please perform the second injection;
7. When it curing, please keep the room clean to prevent impurities or dust from falling onto the surface of the uncured liquid.
Emergency measures
If Inhale: Rinse with water and go to the hospital
If touching skin: If it causes any allergies by skin contact, soak in dilute acetic acid solution for 10-20 minutes and go to the hospital as soon as possible.
If touching eyes: Rinse with water immediately and go to the hospital as soon as possible.
Contaminated clothing should be changed immediately.
If touching skin: If it causes any allergies by skin contact, soak in dilute acetic acid solution for 10-20 minutes and go to the hospital as soon as possible.
If touching eyes: Rinse with water immediately and go to the hospital as soon as possible.
Contaminated clothing should be changed immediately.
storage & packing
|
Part A
|
Part B
|
Other (can be customized)
|
|
5KG/20kg Bucket
|
5KG/bucket
|
1kg/2kg/5kg/20kg
|
The product should be stored and sealed in a cool and ventilated environment at 25 ° C; the hardener is relatively sensitive to moisture in the air and should be sealed in time when not used up.
Company profile
FAQ
1
.
Are you trading company or factory?
Obviously we are a factory. We own 5000sqm factory and advanced facilities, with 30 tons daily output. Our
factory is in Foshan city which is next to Guangzhou.
2. Is the resin good quality?
Sure. It' s super gross, high crystal, high hardness, bubble free, UV resistance, and Scratch proof.
3. What’s the maximum casting thickness for river table?
It depends on the temperature, mixing quantity, and size of the holeNormally, 5-7cm available in 25 25C
4. Do you provide free sample before bulk order?
Yes, 1-2kg free sample available. you may need to bear the freight for samples , when you make bulk order to
us we will reduce from the total amount.
5. Which shipping way is available?
We welcome if you have your own shipping forwarder in China. If not, we can ship via our agent.
Fedex will be the first choice less than 20kg.
6. What’s your MOQ?
It depends on the shipping.
Sample order have no MOQ, ship by sea will be 200kg MOQ
7. Which payment way is workable?
Trade Assurance on Alibaba, Western Union, L/C, Paypel, T/T (50%deposit, 50% before shipment after presentation of ready cargo)
8. Delivery time?
Normally,delivery time of standard order is 1-3 days after you pay.Customized order will need 15 20 days.
9. How to be your distributor?
A:We welcome distributors and agents worldwide,we will provide the best solution and service for our partners.
10. What’s the storage date
Normally 12 Month available if well sealed.
After 12 months, it can still be used but there will be a light yellowish, and may not be cured as well as before.
Hot Searches
