wheel abrasive tool non woven convolute abrasive wheel LD FIN for metal working deburring and wheel polishing

Light Deburring and Polishing Convolute Abrasive Wheel (LDP)

LDP is suitable for various of precision polishing and light deburs. It is designed to provide a clean and economical system for removing fine burrs while providing a highly polished finish. Used for fine deburring, polishing and finishing because of their conformability, LDP wheels will maintain critcal tolerances while still providing a fine polished finish. LDP can be used as a substitute for imported light debur wheel. The applications include grinding hydraulic valve core, mold and pressure parts grinding&polishing, aircraft parts polishing, furniture glass oblique edge polishing, etc.
The FAB of this series of convolute wheels:
1. Very Long durability;

2. Excellent thermal resistance, no smearing
3. Excellent uniform surface polishing

4. Excellent conformability to workpiece
5. Low dust to ensure healthy production
6. Excellent dynamic balance

Grits

Grit refers to the size of the abrasive grain impregnated into the nylon web. The more aggressive the cut, the rougher the finish. The finer the grit, the less aggressive the cut and the resulting surface finish will be finer, if all other conditions are equal. Right table showd the grit designations to the actual grit range.

Safety Awareness

The safety performance of 99D grinding wheel is strictly tested and has clear safety operation instructions. However, it is still essential to install and use it properly and stick to the safety instruction. Each product is labeled with the MOS: Maximum Operating Speed (below table) . The actual operating speed can not exceed the maximum operating speed.
Moreover, Please also pay attention to the mechanical protection, wear the mask, safety glass and safety shoe. Pay attention to the ventilation of the workshop.

When operating convolute wheel, we should pay special attention to the arrowhead marked on the product, and the direction of the arrow is the rotation direction of the product. The product must be operated with the right direction.

Factors to be considered before choosing

The composition, shape and material type and its hardness of the workpiece.
The roughness and surface state before the working procedure
The surface conditioning effect that the workpiece needs to be achieved, the component tolerance requirements
Tools, speed of equipment, installation size of equipment and other parameters
Grinding steps needed for processing work pieces successively

Product Choose...

Usually, we need to consider the structure of the parts, the size of the grinding wheel, and the speed of the tool and other fixed circumstances.
The SP series product is a kind of laminate structure, the edge surface is the cutting face, the cutting is relatively higher than convolute wheel, it has no rotation direction.
Convolute wheel series (LDP, DEXL, MF, RC...) is the winding structure, the inner hole size is generally 1, 3, 5, 8 inches, plane surface is the cutting surface. When it is used, it is directional and can only rotate in one direction. The arrow identifies the direction of rotation. The convolute wheel is more durable than the SP wheel, which is more suitable for sharp and harsh applications such as deburring.

Product to replace

Replacing similar products: SP series can replace various kinds of unitized wheel, fiber polishing wheel and cloth wheel with mineral; LDP, DEXL, MF, RC can replace the imported brands convolute wheels with similar application purpose.
Cross product substitution: replace steel wool, steel wire brush, abrasive, hard bristle, manual file, polishing paste, grinding fluid, grinding wheel, rubber scraper, manual sandblasting equipment, dressing, cleaning cloth etc.