- Product Details
- {{item.text}}
Quick Details
-
Network:
-
Z-Wave
-
Product name:
-
Door Window Temperature Humidity Sensor
-
Battery:
-
CR2450 3.0V *1pc
-
Range:
-
30m line of sight minmum
-
Standrad:
-
Z-Wave Plus Certificated
-
Frequency:
-
868.42MHz/865.2MHz/869.0MHz/908.42MHz/921.42MHz
-
Net Weight:
-
22g
-
Warranty:
-
1 Year
-
Battery life:
-
3 years
-
Certification:
-
Z-Wave Plus, FCC
-
Service:
-
OEM / ODM
Quick Details
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
EVA LOGIK
-
Model Number:
-
ZWS713
-
Network:
-
Z-Wave
-
Product name:
-
Door Window Temperature Humidity Sensor
-
Battery:
-
CR2450 3.0V *1pc
-
Range:
-
30m line of sight minmum
-
Standrad:
-
Z-Wave Plus Certificated
-
Frequency:
-
868.42MHz/865.2MHz/869.0MHz/908.42MHz/921.42MHz
-
Net Weight:
-
22g
-
Warranty:
-
1 Year
-
Battery life:
-
3 years
-
Certification:
-
Z-Wave Plus, FCC
-
Service:
-
OEM / ODM
Product Description
|
Product name
|
Door Window Temperature Humidity Sensor
|
|
Battery
|
CR2450 3.0V *1pc
|
|
Range
|
30m line of sight minmum
|
|
Brand Name
|
EVA LOGIK or Customization
|
|
Warranty
|
1 Year
|
|
Battery life
|
3 years
|
|
Certification
|
Z-Wave Plus, FCC
|
|
Service
|
OEM / ODM
|
Installation
1.You can choose mount it on any type of clean flat surface on D/W.
2.Use the supplied adhesive tape to attach magnetic base to the D/W.
3.Install in your electrical switch box or mount anywhere on a wall with just adhesive tape
4.Power by battery,no need wires needed.Note the ± direction of the battery
5.Control other Z-wave devices and enable scenes with a click of a button
Wake-up mode
The sensor’s wake-up interval is set to 12 hours by default to save battery life. You can change the wake-up interval using yourcontroller’s advanced settings if available.
1.You can choose mount it on any type of clean flat surface on D/W.
2.Use the supplied adhesive tape to attach magnetic base to the D/W.
3.Install in your electrical switch box or mount anywhere on a wall with just adhesive tape
4.Power by battery,no need wires needed.Note the ± direction of the battery
5.Control other Z-wave devices and enable scenes with a click of a button
Wake-up mode
The sensor’s wake-up interval is set to 12 hours by default to save battery life. You can change the wake-up interval using yourcontroller’s advanced settings if available.
Factory reset
Click the button 2 times quickly while stay at least 10 seconds .
LED flashing and while stay up 3S.
Click the button 2 times quickly while stay at least 10 seconds .
LED flashing and while stay up 3S.
Recommend Products
Hot Searches
