- Product Details
- {{item.text}}
Quick Details
-
EINECS No.:
-
230-391-5
-
Place of Origin:
-
Hubei, China
-
Brand Name:
-
FORSEN
-
Model Number:
-
1262
-
Type:
-
Liquid Glue
-
Color:
-
red
-
Application:
-
thread locking less than M20
-
Working temperature:
-
-60 ~ +150 ℃
Quick Details
-
CAS No.:
-
7085-85-0
-
Other Names:
-
anaerobic sealant adhesive
-
MF:
-
mixture
-
EINECS No.:
-
230-391-5
-
Place of Origin:
-
Hubei, China
-
Brand Name:
-
FORSEN
-
Model Number:
-
1262
-
Type:
-
Liquid Glue
-
Color:
-
red
-
Application:
-
thread locking less than M20
-
Working temperature:
-
-60 ~ +150 ℃
Liquid PTFE Tape Replace Pipe Sealant :
50ml,250ml,1kgs
OEM SERVICE :
Forsen High Strength Anaerobic Thread locker Adhesive FS-1262 is one component, low to medium viscosity, high strength anaerobic threadlocker. It cures when confined in the absence of air between close fitting metal surfaces.
Typical Properies
- High strength, low viscosity
- Excellent chemical resistance
- Controlled lubricity for accurate clamp loads
- Heat and hand tools are required for disassembly
- Used for permanent locking and sealing threaded fasteners.
Typical Applications
- Used for permanent locking and sealing threaded fasteners. Prevent loosening, leakage and thread rusty.
- Typically used for stud studded end locking (such as cylinder head stud).
Detailed Products of FORSEN ® Anaerobic Threadlockers
| Product No. | Typical Use | Max Gap Fill (mm) | Uncured | Cured | Curing Speed | |||||
| Color |
Viscosity
GB/T2794-1995 (MPa.s) |
Max oil pressure(MPa)
|
Break Torque
GB/T18747.1- 2002 (N.m) |
Prevail Torque
GB/T18747.1-2002 (N.m) |
Temp. Range )( °C) |
Fixture
(min) |
Full cure
(h) |
|||
| FS-1222 | thread locker | 0.13 | purple | 1200 | 36 | 6 | 4 | -60-150 | 20 | 24 |
| FS-1242 | thread locker | 0.13 | blue | 1200 | 36 | 12 | 4.8 | -60-150 | 20 | 24 |
| FS-1243 | thread locker | 0.13 | blue | 2300 | 36 | 20 | 7 | -60-150 | 20 | 24 |
| FS-1262 | thread locker | 0.13 | red | 1900 | 36 | 21 | 25 | -60-150 | 10 | 24 |
| FS-1271 | thread locker | 0.13 | red | 500 | 36 | 25 | 31 | -60-150 | 20 | 24 |
| FS-1272 | thread locker | 0.25 | red | 9500 | 36 | 28 | 25 | -60-230 | 20 | 24 |
| FS-1277 | thread locker | 0.25 | red | 7000 | 36 | 38 | 32 | -60-150 | 60 | 24 |
| FS-1290 | thread locker | 0.10 | green | 37 | 36 | 30 | 29 | -60-150 | 3 | 24 |
| FS-340 | thread locker | 0.25 | l.yellow | 2500-3500 | 36 | 20 | 18 | -60-150 | 10 | 24 |
Directions for use :
1. For best performance bond surfaces should be clean and free from grease.
2. Moisture curing begins immediately after the product is exposed to the atmosphere, therefore parts to be assembled should be mated within a few minutes after the product is dispensed.
3. The bond should be allowed to cure (e.g. seven days), before subjecting to heavy service loads.
4. Excess material can be easily wiped away with non-polar solvents .
