- Product Details
- {{item.text}}
Quick Details
-
Brand Name:
-
SINOPEC
-
Model Number:
-
2102
-
Product name:
-
Low-density Polyethylene (LDPE) Granules
-
Material:
-
Pure PE
-
Color:
-
Natural
-
Appearance:
-
Natural White Granule
-
Type:
-
Vrigin
-
Name:
-
Virgin Polyethylene PE Resin
Quick Details
-
color:
-
black
-
Shape:
-
granule, Pellet - Granules
-
Place of Origin:
-
Hebei, China
-
Brand Name:
-
SINOPEC
-
Model Number:
-
2102
-
Product name:
-
Low-density Polyethylene (LDPE) Granules
-
Material:
-
Pure PE
-
Color:
-
Natural
-
Appearance:
-
Natural White Granule
-
Type:
-
Vrigin
-
Name:
-
Virgin Polyethylene PE Resin
Polyethylene or polythene (abbreviated PE ; IUPAC name polyethene or poly(methylene) ) is the most commonly produced plastic . It is a polymer , primarily used for packaging ( plastic bags , plastic films , geomembranes and containers including bottles , etc.). As of 2017, over 100 million tonnes of polyethylene resins are being produced annually, accounting for 34% of the total plastics market.
PE is usually a mixture of similar polymers of ethylene , with various values of n . It can be low-density or high-density and many variations thereof. Its properties can be modified further by crosslinking or copolymerization. All forms are nontoxic as well as chemically resilient. As a consequence of these factors, PE is used on an immense scale. Its widespread use is also problematic because it resists biodegradation. Like the hydrocarbon it is, PE is white or colorless and combustable.
Data sheet
|
Project |
Test data |
Data unit |
|
|
Basic properties |
Density |
921 |
kg/m3 |
|
|
Melt flow rate |
1.9 |
g/10min |
|
Mechanical properties |
Elongation at break (MD) |
>100 |
% |
|
|
Elongation at break (TD) |
>500 |
% |
|
|
F racture stress (MD) |
30 |
Mpa |
|
|
Fracture stress(TD) |
17 |
Mpa |
|
|
Yield stress (MD) |
11 |
Mpa |
|
|
Yield stress (TD) |
11 |
Mpa |
|
|
Tear strength (MD) |
70 |
Kn/m |
|
|
Tear strength (TD) |
25 |
Kn/m |
|
|
Modulus of elasticity (MD) |
190 |
Mpa |
|
|
Modulus of elasticity (TD) |
190 |
Mpa |
|
|
The impact strength |
20 |
Kj/m |
|
Other properties |
A dhesive |
20 |
g |
|
|
After the adhesive |
50 |
g |
|
Optical performance |
G loss |
53 |
‰ |
|
|
The fog degree |
10 |
% |
|
|
T ransparency |
26 |
mV |
1.Product Introduction
Polyethylene
Polypropylene is a polymer formed by addition polymerization of propylene. It is a white waxy material with a transparent and light appearance. The chemical formula is (C3H6)n, the density is 0.89~0.91g/cm3, It is flammable, with a melting point of 189ºC, softening at about 155ºC, and the use temperature range is -30~140ºC . It is resistant to corrosion by acids, alkalis, salt solutions and a variety of organic solvents below 80°C, and can be decomposed under high temperature and oxidation.
PP Features
1. The relative density is small, only 0.89-0.91, which is one of the lightest varieties in plastics.
2, good mechanical properties, in addition to impact resistance, other mechanical properties are better than polyethylene, molding processing performance is good.
3. It has high heat resistance and the continuous use temperature can reach 110-120 °C.
4, good chemical properties, almost no water absorption, and does not react with most chemicals.
5, the texture is pure, non-toxic.
6, electrical insulation is good.
2.Application:
1.Fiber ( Carpet, Textiles, Upholstery, etc.)
2.Film ( shopping bags, casting film, multilayer film, etc.)
3.Blow Molding ( Medical & Cosmetic container, Lubricant & Paint container, etc)
4.Extrusion Molding ( Sheet, Pipe, Wire & Cable, etc.)
5.Injection Molding ( Automotive, Electronic, Construction, House wares, Furniture,
Toys, etc.)
3.Packaging Details:
25kg/ carton or 25kg/bag, or per your requirement
25kgs net weight in PP woven or PE plastic bag about 20 tons for 20" container
Product use
FAQ
1. Are you manufacturer or trading company?
· We are a manufacturer in China, also cooperate with other suppliers, integrating industry and trade.
· We have many domestic and foreign supply channels, in order to meet a large number of client needs.
2. How long have you been engaged in export trade?
· For a long time, our main market has been in China. In order to meet the requirements of foreign customers, we recently established an export department.
· We also hope that our products can enjoy a reputation abroad, and hope to make more friends with foreign customers.
3. What are your payment terms?
· Available TT, LC, Paypal, Credit Card etc., can be negotiated.
4. What is the delivery time?
· Usually about 7-15 days, depends on quantity and products.
5. What certifications do you provide?
· Approval ISO, CE certifications. · Provide COA, MSDS reports.
