Radar Sensor ST701E Microwave motion sensor and smart switch

European standard Mini ST701E inside fixture mounting Human body sensor Switch LED Switch microwave motion sensor

The product is a new saving-energy switch; it adopts microwave sensor mould with high-frequency electro-magnetic wave (5.8GHz), integrated circuit. It gathers automatism, convenience, safety, saving-energy and practicality functions. The wide detection field is consisting of detectors. It works by receiving human motion. When one enters the detection field, it can start the load at once and identify automatically day and night. Its installation is very convenient and its using is very wide. Detection is possible through doors, panes of glass or thin walls.

Electronical characteristics:

Power Source: 220 -240V/AC                               Detection Range: 360°/180°

Power Frequency: 50/60Hz                                   Detection Distance: wall: 5-15m (adjustable)

Ambient Light: <3-2000LUX (adjustable)                                                ceiling: 1-8m (radius), adjustable

HF System: 5.8GHz CW radar, ISM band              Transmission Power: <0.2mW

Time Delay: Min. 10sec±3sec                                Installing Height: wall 1.5-3.5m

Max.12min±1min                                                              ceiling: 2-8m

Rated Load: 1200W (incandescent lamp)            Power Consumption: approx 0.9W

300W (energy-saving lamp)            Detection Motion Speed: 0.6-1.5m/s

FUNCTIONS:

• Can identify day and night: It can work in the daytime and at night when it is adjusted on the “sun” position (max). It can work in the ambient light less than 5LUX when it is adjusted on the “moon” position (min). As for the adjustment pattern, please refer to the testing pattern.
• SENS adjustable: It can be adjusted according to using location; low sensitivity with 2m for detection distance; High sensitivity with 16m, it fits for large room.
• Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the basic of the first time-delay rest.
• Time–Delay is adjustable. It can be set according to the consumer’s desire. The minimum time is 6sec±2sec. The maximum is 12min±1min.

INSTALLATION: (see the diagram)

Ø  Switch off the power.

Ø  Fix the bottom on the selected position with the inflated screw through the screw holes at the side of the sensor.

Ø  Connecting the power and the load to sensor as per the connection-wire sketch diagram.

Ø  Switch on the power and test it

Lifetime and Warranty:

Our company adopts automatic machines, such as: SMD, auto component inserter, wave solder, auto injection machines,the daily  output is up to 20000-30000 pcs

The concept of our company is"advocating new modern living environment",which focuses on researching the and developing the contemporary household intelligent product.our product can be truly satisfied for different customer's requirement,most of them are available with CE GS ROHS R&TTE REACH certification.