1 5 10 20 30 40 micron Absolute PP PE Membrane Pleated Filter Cartridges

Dimension

ø69mm

ø83mm

ø131mm

Filtration Area

0.6m²/10″

1.45m²/10″

2.3m²/10″

Length

10″, 20″, 30″, 40″

Filer media: Nylon66，PTFE, PTFE/L, PVDF/L, PES, PVDF/B, GF,PP

Support Layer: PP

Cage/End cap: PP

Core:PP, SS

Sealing: S=Silicone, E=EPDM, B=NBR, T=Teflon, V=Viton, E=FKM

Connection type

F=DOE, H=213/Flat, J=222/Flat/ss, K=222/Fin/ss, M=222/Flat, P=222/Fin, Q=226/Fin, T=226/Flat, R=226/Fin/ss, V=226/Flat/ss，

Operation conditions

[Max. Operating Temperature]: 80℃
[Max. Operating DP]:4 bar@ 21℃,2.4 bar @80℃.

Selection Guider

Application

Nylon66 Series filter cartridge is constructed of nylon66 media and nonwoven support materials. The adaptors are thermally welded
without the use of glues or adhesive to prevent any possibility of pollution. The filters are produced in clean room and 100%
integrity tested and flushed with ultrapure water

1. Wine, beer, mineral water, pure water filtration.
2. Solvents filtration
3. Fine chemical
4. Ultrapure water
5. Digital inks

Hydrophobic PTFE Series filter cartridge is constructed of hydrophobic PTFE membrane which has excellent chemical compatibility
and corrosion resistance. This filter cartridge is suitable for the filtration to liquids and gases with strongly aggressive and
oxidative.

1. Compressed air, CO2Line Sterile filtration
2. Tank Vent
3. Aggressive acids, bases, solvents

Hydrophilic PTFE Series filter cartridge is constructed of hydrophilic PTFE membrane which has excellent chemical compatibility
and corrosion resistance.The membrane is hydrophilic which can filter the liquid directly without pre=wetting to save the
operation time.

1. Mineral water, purified water, ozone, strong, oxidizing liquid filtration
2. High temperature liquids filtration
3. Strong alkali, acids, corrosive liquids filtration

Hydrophilic PVDF Series filter cartridge is constructed of hydrophilic PVDF microporous membrane with excellent resistance to high
temperature and corrosion resistance, no fiber shedding. Filter media has good hydrophilicity, no need to do a pre=wetting
treatment before filing water solutions.

1. Oil & Chemical
2. Ophthalmics, WFI
3. Tissue Culture Media and Media a additives
4. Strong Alkaline, acids solvents

PES Series cartridge filter is constructed of imported hydrophilic asymmetric PES membrane and imported non=woven fabrics and silk
netting as support and then pleated. The cage, PP core and end cap are thermally welded with media without using any glue. All
cartridges are manufactured and assembled in a cleanroom environment. 100% of the cartridges are integrity tested and flushed with
EDI pure water. It is suitable for filtering weak acid/alkali based liquid and ultra=pure water.

1. Mineral water, Wine, beer and other Beverages.
2. Ultrapure Water
3. Chemicals
4. API, LPV, blood serum, biological, Buffers and other pharmaceuticals

PP pleated filter cartridge is constructed of high-performance polypropylene filter media that got technological breakthrough type
sub-micro level. The pores of the material are uniformly distributed. The construction is designed scientifically which makes the
filter cartridge got a high flow rate. This allows users can filter the particles in liquid quickly and efficiently and save the
cost.

1. Ink
2. Oil & Chemical
3. Plating
4. Semi-Conductor
5. Food&beverage
6. Industrial Water Treatment

MCE Pleated Filter cartridge is constructed of CN-CA Membrane filter media

PFA Series filter cartridges are constructed of PTFE absolute=rated membrane, PTFE support netting, and ultra=pure PFA hardware.
This presents a filter cartridge with excellent chemical compatibility, corrosion resistance, and low extractions to ensure
high=efficiency filtration and long service life with chemicals.

1.Machinery&Equipment

Glass Fiber series

Big pleated filter cartridge is designed for the filtration of the manufacture wetting process in the flat panel display. It has a
larger filtration area and a higher flow rate. 83 series can meet the 5=6 grade line which has a requirement of 120 L/min flow
rate, 131 series can meet the 7=10 grade line which has requirement of 250 L/Min flow rate.

1.Industrial Water 2.Treatment
3.D. I. Water
4.Acids
5.Semiconductor

Series

Filter Media

Removal Rating

End Cap Type

Length

Sealing Material

Core

CP=69mm
CP1=83mm
CP2=131mm

NY=Nylon66

010=0.1μm

F=DOE

5=5”

S

P=PP Core

PTB=PTFE

022=0.22μm

H=213/Flat

10=10”

E

S=SS Core

PTL=PTFE/L

045=0.45μm

J=222/Flat/SS

20=20”

B

PVB=PVDF

10=1.0μm

K=222/Fin/SS

30=30”

V

PVL=PVDF/L

30=3.0μm

M=222/Flat

40=40”

T

PES=PES

50=5.0μm

P=222/Fin

F

PP=PP

100=10μm

Q=226/Fin

GF=Glass Fiber

T=226/Flat

PFA

R=226/Fin/SS

V=226/Flat/SS