Portable Water Treatment Plastic 2500 Gallon FRP Sectional Water Tank

How to choose a suitable water tank for you?

1. Make sure what kind of water will you store with the water tank?

Usually drinking water will be use FRP water tank or SS304 water tank, while living water, industrial water, farming water and fire-fighting water will use galvanized steel water tank.

2. How to make sure water tank length, width and height?

If the place for water tank erecting is enough big, the lower the better, as the higher the water tank is, the harder

for you to install.

If there is limit space for the water tank installation, then the more square the tank, the cheaper it is.

3. How to make the costs cheaper?

Please contact our service people, we can provide you with workable solutions and help you cut down your costs.

1. C ombined w ater tank is a new type water tank that widely used in the world.

It is assembled by the high-quality SMC water tank plate. Its characteristic:

(1) It adopts to the food-grade resin, so it can guarantee the water quality and prevent the pollution.

(2) It has the high strength, light weight, corrosion resistant, beautiful appearance, long service life, convenient

to maintain and other features.

2.SMC combined water tank is widely used in industrial and mining enterprises, enterprises and institutions,

residence, hotel and other buildings. It can used as water storage facilities in drinking water, fire water and so

on.

SMC water tank applications:

1). Potable Water Storage (drinking water)

2). Rainwater Harvesting & Storage

3). Emergency Water Storage

4). Pump Chambers

5). Effluent/Acid and alkali solution treatment & Storage

6). Hospitals, buildings, building site, schools and other places

(1) Support for Panels: The panels shall be supported externally or internally by an adequate support

system. External Reinforcement - Hot Dipped Galvanized Steel; Internal Reinforcement - Hot Dipped Galvanized

or Stainless Steel 304 rod support and tie-rod.

(2) Sealing Materials: Non toxic Rubber foam to be used for all jointing, it is especially developed with long

experience and technology on SMC products. It maintains soft itself and adhesives even at low temperatures .

(3) Bolts, nuts and washers for the assembly of panels: Exposed externally are hot dipped galvanized

steel and in contact with water internally are hot dipped galvanized steel or stainless steel 304 .

(4) Flange: the flanges for inlet, outlet, drainage, overflow are hot dipped galvanized steel or stainless steel

304 .

(5) Ladders: SMC sectional tank of 1.5m depth or more shall be provided with internal ladder made up of

materials same with the supports.The external ladders shall be galvanized mild steel or equivalent .

(6) Prop ups

(7) Fabricated Steel Base

1) Light weight, high strength.

2) Leak-proof/Water      Tightness: Due to the material is fiberglass reinforce plastic with high density, and the sealing tape is high

performance with non toxic, so it's leak-proof tank.

3) Long lifetime, long durable time: the maximum distortion of the sidewall is less than 1 percent for the height;

maximum distortion of the bottom center is less than 10mm. The normal durable lifetime is more than 30 years.

4) Corrosion resisting; anti-rusted.

5) Easy to clean and maintenance management convenient, Drainage at the tank bottom can be cleaned

easily and Manhole panel makes it easy to enter into the water tank inside.

6) Non-toxic, it is made from food grade resin, clean and no pollution. SMC Water Tanks satisfy relevant

Food Sanitation standards. Since exterior light is completely blocked, bacteria generation and germ

growths are prevented.

7) Convenient Installation: Standardized parts are used for on-site installation so that materials can be

brought into restricted areas for convenient installation.