|
Product Information
|
|
|
|
Input
|
DC5V USB cable
|
|
|
LED Type
|
SMD2835
|
|
|
Material
|
ABS+PC
|
|
|
CCT
|
3000/4000/7000K adjustable
|
|
|
Installation
|
3M Glue
|
|
|
Power
|
0.8W*10 bulb
|
|
|
Demension
|
200*140*56mm
|
|
|
Warranty
|
2 years
|
|
It is easy and conventient to use sticker for
mirror glass, wood, plastic and metal surface.
According to their own unique design DIY installed
in the dresser fill light and decoration.
USB 5V low voltage power supply,safe! Multilevel
luminance adjustable,suitable for different
dres sing needs .
1. Cosmetic mirror or be installed surface treatment : should be sticky surface should be dry,clean,and no rust,oxidation,grease,dust and other pollutants.
2. According to the design of the number of mirrors and bulbs ,each bulb installation location, note the lamp spacing of up to 33 CM,the minimum spacing of about 15 CM.
3. Remove the product to determine the power and control switch to place the seat is appropriate to determine the first light paste location (with the control switch to connect the first line).
4. The bottom of the product is double-side adhesive tape tear off the film,and then affixed to the first lamp position ,forced down,so that
double-side adhesive is pasted better. Make the tape and the bonding surface get full contact.
5.When you use the lights,you can adjust the color temperature and the brightness with the function buttons.And choose your favorite color!
