- Product Details
- {{item.text}}
Quick Details
-
Work mode:
-
Continuous Wave
-
Voltage:
-
AC220/110V 50/60HZ
-
Power:
-
≤10W
-
Pressure range:
-
≥16kPA
-
Air output:
-
≥4.5L/min
-
Cycle time:
-
5~6minutes
-
Certificate:
-
ISO,CE
-
Dimension/height after charge:
-
1950x900mm/7cm
Quick Details
-
Type:
-
Air
-
Place of Origin:
-
Shandong, China
-
Product name:
-
mediacl air mattress
-
Work mode:
-
Continuous Wave
-
Voltage:
-
AC220/110V 50/60HZ
-
Power:
-
≤10W
-
Pressure range:
-
≥16kPA
-
Air output:
-
≥4.5L/min
-
Cycle time:
-
5~6minutes
-
Certificate:
-
ISO,CE
-
Dimension/height after charge:
-
1950x900mm/7cm
| Work mode | Continuous Wave |
| Voltage | AC220/110V 50/60HZ |
| Power | ≤10W |
| Pressure range | ≥16kPA |
| Air output | ≥4.5L/min |
| Cycle time | 5~6minutes |
| Dimension/height after charge | 1950x900mm/7cm |
[Main Structure of the Product]
The medical air cushion (“air cushion” for short) is made of rubber or rubber plus plastic materials.
[Performance]
1.The nozzle of the air cushion should be fixed tightly and without air leak.
2.The air cushion should not leak when the pressure is of 10.6Kpa.
[Application of the Product]
This product is used for the patient lying in bed for a long time or the paralytic patient to support
his body and avoid the bedsore.
[Applicability]
This product is suitable for the patient lying in bed for a long time or the paralytic patient to support
his body and avoid the bedsore.
[Usage]
1.Pull out the cover first when to fill it with air.Charge the air into it by put air-filling pipe right at the
mouth of bicycle pump.The pressure of air-filled can't exceed 10.6Kpa (If you feel it a little soft, it’s all right.)
2.After filling air, press the mouth of bicycle pump toward the inside of the cushion with your thrumb
making the outside smooth.When bleed the air, block the bottom of the mouth with your thrumb and forefinger
and then put forth the air strength slightly.
[Attention]
1.The air cushion can only used for the patient, and can’t be used under the water.
2.Keep it away from acid, alkali,organic solvent or heat source avoiding direct sunshine.Don’t touch it with
sharp things to avoid leaking air and affect use.
3.The pressure of outside can’t be over than 100kg when use it .
4.Clean it’s surface with cloth soaked with a little washing powder ,wipe it slightly.Prohibit to wash it with
petrol and other chemical solvent etc.
[Storage]
Store the air cushion in the room of cooling, the relative humidity should not more than 80%, no corrosive gas,
and well airy.
♦ We provide 24 hours services,for any inquiries,we will reply within 12 hours.
♦ Our own professional team have professional attitude to introduce and recommend products and services.
♦ We offer OEM services. Can print your own logo on Lead Apron.
♦ We have very experienced engineers, can help you better use our Lead Apron.
1.OEM
2.Good protective effect
3.The fabric is the best
4.More style,innovative,wearable
5.Comfortable shoulder pads
