Tire Sequence Branding Portable Hot Brander of Electric Heated Stamping Iron Truck Tyre Serial Numbers_Identifying Codes Printer

Tire Sequence Branding Portable Hot Brander

u Special notice

01:The machine has earth wire and dual fuse, please use it correctly

02:Power supply must comply with tool

03:Keep the tire brander dry, don’t use it in humidity environment

04:Must leave 0.5m space when using the tire brander

05:Cannot rebuild the tire brander, open the power box and heating couples

06:Must cut off the main power supply after using the machine

07:Please change the new heating tube once have defected heating function

08:Please contact manufacturer if need to change the heating tube

09: Cannot use the tire brander over 8 hours

10: If have any residues or detained material on numbering roller, please clean it immediately

11: Please lubricate the numbering roller to improve its longevity

u heating temperature reference

Tire Sequence Branding Portable Hot Brander

01: What are hot branders? Who uses them and why?

Ans: The multi-purpose hot brander, keepleader produce is made up of a detachable branding head and a heating tool, some branded marks are done with a portable brander and, for efficiency, electric tools designed to be mounted in a drill press are used, there is an array of products made of materials such as wood, plastics, leather, suede, cork, and card stock that are branded for identification, and promotional purposes, woodworkers, leather crafters, beekeepers, tradesmen, artisans and hobbyists alike choose to brand their logo, name and other identification marks on their products, equipment and belongings

02: What material can I brand?

Ans: with wood being the obvious, there are many more materials that you can brand using keepleader’s Tire Sequence Branding Portable Hot Brander, there include many kinds of leather, suede, rubber, certain plastic (e.g.: vehicle batteries), thermoplastic, elastomeric ( typically used for yoga mats), cork, cardstock, denim, canvas, burlap, dense foam, food items such as burger buns, coconuts and much more

03: Is a Tire Sequence Branding Portable Hot Brander the same as branding iron?

Ans: Some people use the term “hot stamp” when they are actually looking for a branding iron, but there is difference, a hot stamp is used a hot-stamping machine with lower temperature, an typically in combination with hot-stamping foil, in comparison, a branding iron is usually heated p to a higher temperature and is used for an array of application

04: Does keepleader make branders or burning stamps?

Ans; Our website includes a wide range of branding irons, and burning stamps, feel free to contact keepleader with any question you may have and to find out what kind of branding iron would be the most suitable for your specific application

05: Do you sell culinary branding irons?

Ans: Keepleader sure do, keepleader make solid stainless steel, branding heads, specifically designed for branding various foods, including burger buns, coconuts and more

06: Can I brand leather and suede without the mark looking burn?

Ans: On certain kinds of leather, using reduced heat and a shorter dwell-time can result in no color change and the mark can resemble that of a mark impressed with a metal stamp, for example, a branded mark on texture leather features a smooth image, free of texture, similar to ironing our or pressing wrinkled fabric
06: Does keepleader make custom branding irons?

Ans: Yes, keepleader does, producing custom branding heads is our specialty
07: Can keepleader design a logo for me

Ans: if you give us a rough sketch of your idea, we can take it from here, keepleader has an in house graphic design team, available to assist with recreating, refining and optimizing logos, design and more
08: I have a logo, what format do you need it on?

Ans: keepleader prefers vector formats but, if you don’t have logo in vector format, you can send us whatever you have
09: I have a logo, can you make ne a branding iron and give me an estimate?

Ans: keepleader certainly can, please send us your logo, the size you want it to be, and specify the material you will be branding
10: How to ship the Tire Sequence Branding Portable Hot Brander once we order

Ans: Keepleader usually take international express, UPS, DHL, TNT, or you can assign your preferred forwarder

11: How long will it take to receive my order?

Ans: Most custom Tire Sequence Branding Portable Hot Branders are ready for shipment in 10~15 business days from the day we receive the customers’ approval of our proof, rush and super rush orders can typically shipped out on the scheduled shipping day
12: I am not sure if I can brand my paper products, is it possible?

Ans: General speaking, paper goods such as card stock and cardboard brand quite well
13: Can you make me a Tire Sequence Branding Portable Hot Brander for branding my wood and leather products?

Ans: Yes, typically branding wood requires more heat than branding leather, this is why keepleader offer electric heating tools and temperature control units

01: Return & Exchanges

KEEPLEADER doesn’t accept returns, exchanges or cancellations

But, please contact KEEPLEADER customer department staffs if you have any problems with your order

Returns and exchange details

Some items have specific stipulations concerning refunds and returns, which are explicitly made in the listing, all custom-made or personalized orders are non-returnable with exceptions made for defects in workmanship or materials’, shipping is non-refundable

In the unlikely event that something is damaged in shipping, send it back, keepleader will repair or send the corresponding parts for replacement, but, the delivery cost will charged to the buyer, needless to say, contact keepleader “first” so, keepleader will be aware that there is been a problem

02: Warranty

No one warrants custom rotary serial brander, except keepleader, your rotary serial brander is warranted against defects in material and workmanship for six months after the purchase date, this does not include damage or wear resulting from physical trauma (it got dropped/thrown/melted wire and plastic grip), misuse or wear that is caused from normal use, as if that weren’t awesome enough, if your rotary serial brander is damaged in a way that isn’t covered under warranty, keepleader can usually repair or replace the damage components at a reasonable cost

Please be aware that disassembly of modification of rotary serial brander will void the warranty, if your rotary serial brander requires service, please contact keepleader

03: Shipping policies

Keepleader ship the rotary serial brander by DHL, UPS, TNT or other international express carrier, international buyer can expect to pay a bit more (contact keepleader to find out how many, since it varies)

04: Miscellaneous for international customers

Any VAT, duties, customs fees, or import restrictions are your responsibility; keepleader doesn’t know what, if any, fees your government will require you to pay. Keepleader declares the value of your purchase to be the actual purchase price, minus the shipping cost

01: Introduction

011: Branding equipment

Branding is possibly the most practical and economical way to permanently mark almost any material other than metal or glass, fine furniture and other works of art are frequently branded to advertise a trademark, logo, or manufacturer’s name or to sign or individualize a craftsman’s work, branding is also used to identify tools or equipment for personal or security purposes

Material suitable for branding include cork, chamois, leather, plastic, paper, rubber, wood, particle board and wallboard, even meats and cheese, keepleader’s branding irons have been used for branding barrels, batteries, boxes, brooms, crates, ladders, lumbers, pallets, plastic parts, rubber gloves, telephone poles, tires, tool handles, wooden furniture, particle board, and myriad of other objects

012: Branding Dies

Branding die are fully customizable, leverage our expertise to select the right style and material for your unique application, keepleader offer IPPC heat treat dies, dies to automatic branders, dies for handheld branders, and individual characters and type, excelsior dies are manufactured in steel or magnesium, brass, aero aluminum alloy, whichever composition is best for your job

What’s more, keepleader’s branding dies will save your time and money, keepleader’s sharp face dies are engineered so that the surface of the design comes to a point which marks your product faster that a traditional surface die, your branding process becomes more efficient and that helps the bottom line, and for pallet and wood packaging companies, excelsior branding dies efficiently and effective mark their products while meeting the requirements of regulated

Always looking to enhance your experience and ease the process, excelsior has introduced a new thin branding die, this new die will heat faster and allow the user to lower the temperature on their branding head, extending the life of the heating elements, keepleader has been able to low the temperature as much as 200 degree on an automatic branding unit

014: Branding irons

Excelsior supplies a great variety of branding irons, from electric to propane and hand-held to drill press the options are virtually limitless, keepleader also offer rotary serial number irons, slotted heads, auxiliary handles, interchangeable characters and more, the options can be overwhelming, but keepleader’s experts are happy to help you choose the best solution for your application

02: Quality control and warranty

Keepleader warrants its line of branding and hot branding equipment to be free of defects in material, and workmanship, our liability under its warranty is limited to 90 days from the date of shipment, claims not made in writing with such period are waived, warranty does not extend to parts damaged after date of shipment from keepleader’s plant when the damage is not directly due to defect in material or workmanship, not does it apply to goods altered or repaired by anyone other than keepleader authorized employees, nor goods furnished by buyer or acquired at buyer’s request and/ or to buyers specifications, in one event shall keepleader be liable for labor or consequential damages. There is not implied warranty by keepleader for fitness of purpose

For a warranty claim to be considered, buyer must contact keepleader for return of product for inspection, all returns must have keepleader’s approval prior to return, any item that has been used, along with all custom make branding tools and branding heads are non-refundable

Before you order, please provide your artwork and its size, or its description, or its sketch, keepleader will strictly comply with your demanding, somewhat unconfirmed is not regarded as a part of contract, as am aspect for warranty claim. That’s to say any personalized, custom branding die must be confirmed as sales contract