PBM Manufacturer Price 48mm * 50mm * 705mm Fuel-efficient Cooling Cross Flow Fan for Oven and Storage Heaters

1-1

Rated Voltage

24 VDC

1-2

Operating Voltage

16~28 VDC

1-3

Low-Start Voltage

15 VDc

1-4

Rated Speed

255ORPM

1-5

Input Current

0.2A

1-6

Input Power

4.8w

1-7

Acoustical Noise

40dB(A)

1-8

Life Expectance

50,00OHours(L10)
At 40℃room, humidity 15%65%RH.

1-9

Direction of Rotation

Anti-clockwise
seen on motor

1-10

Direction of Air Flow

All around

1-11

Insulation Class

Class B

1-12

Insulation Resistance

50 Mega Ohm minimum at 500VDc
Between frame and () terminal

1-13

Motor Protection

Locked rotor protection
Polarity protection
Automatic restart capability

1-14

Speed Control

Control inputO~10VDC

1-15

Dielectric Strength

5mA maximum at 500VAC 5OHz five second
Between frame and (+) terminal

1-16

Signal Output

No

2-1

Dimension

48mm x 50mm x 705mm(see dimension drawing)

2-2

Material of Impeller

Steel

2-3

Number of Blades

22

24

Impeller Plate

Injection-moulded round sheet-metal plate

2-5

Mounting Position

Any

2-6

Surface of Rotor

Electrophoresis

2-7

Bearing System

NMB ball bearing

2-8

Lead Wire

Red , Black,White AWG22#

2-9

Weight

837g

2-10

Package

Standard

3-1

Locked-rotor Protection

Over-current limiting circuit protects motor from damage at least
for 72 hours oflocked rotor condition at rated voltage.

3-2

Maximum Current
under Locked Rotor

A,Typical inrush current when the motor is trying to re-start under
locked rotor conditions is 2~4 times the normal running current
reoccurring and for 16~20% of restarting cycle period.
B, If he CL function is used this restarting inrush current is about
the same as the normal running current.

3-3

Reverse Polarity
Protection

No damage if the positive and negative leads are reversed under
maximum operation voltage conditions.

3-4

Over Voltage Protection

lhe circuit will be shut down automatically when input voltage
over 30VDC.And re-started when Voltage down to 30VDC below.

3-5

Soft Start

In 5 seconds after power on and speed control voltage gets to 1.5v.

4-1

Operating Temperature

-25℃ to60℃

4-2

Storage Temperature

-40℃ to75℃

4-3

Operating Humidity

5% to 90%RH

4-4

Storage Humidity

5% to 95%RH

4-5

Drop Test

In minimum packaging condition fan withstand each one drop of
three faces from 30cm distance height onto 10mm thickness of
wooden board.

4-6

Vibration Test

Sine Wave.
Displacement amplitude: 0.75mm (Equivalent 10G).
Frequency Range: 10Hz~-55Hz/ 30 sec.55Hz~10Hz / 30 sec
Linear Scanning 120 Cycle
Endurance timer per axis: 2 Hours
Orientation:X,Y,Z.

4-7

Shock Test

Apply peak acceleration 50g and keep duration of the pulses for
l1ms (Half sine wave)

4-8

RoHS

All the material meets RoHS standard.