New design WiFi SPI RGB controller WIFI LED dream color controller

New design Wifi SPI controller WIFI LED controller Leynew WF300

Summarization

LED-WiFi controller is following the traditional with infrared, RF technology controller foundation, it is birth of market and customer's demand, it is one type controller which integration the newest wifi technical in the market. It makes the LED control more convenience, more hommization. We can use an Android system or IOS system mobile phone to install control software, then it can control LED, this is the wishes of every customer.

Use WiFi technology can make our control range more wider, can get rid of narrow space constraint, in building can control more than 50m, in outdoor can control more than 100m. In the condition of not use the mobile software, also can use the remote control to control, very convenience, bring many choices for you.

Technical Parameters

Remote control technical parameters

Working temperature:-20-60°C

Power supply method:AAA*3

Supply voltage:1.5V*3

Standby power:0.015mW

Standby current:3uA

Working current:200uA

Emission current:10mA

Remote control distance:about 50m

Standby time:6 month

Software technical parameters

Name : Dream Color

Runtime platform: Android version support Android system(better one can support Samsung,

HTC), IOS version support IOS system, equipment must have WiFi function.

Language: English

Category: communications

Free, green, no plug-ins

Controller technical parameters

Working voltage: DC5--24V

Output control: SPI signal output

Output current: 4A*3

Connect mode: SPI signal wires(DATA, CLK)

External dimension: L107*W65*H30 ( mm )

Receiving sensitivity: 802.11b DSSS(-5dBm) , 802.11b CCK (-10dBm) , 802.11g OFDM(-15dBm)

Remote control function instruction

1. Controller panel have 64 touch point, and the function as follow:

1. ON/OFF ,you can turn on/off controller output at any time;

2. Pause,at dynamic mode, you can stop the controller at the current state;

3. This button have 2 functions :

*Mode + choice key, when current control pattern is pulley pattern (color), if must

realize the pattern (color)in the controller, can press this key.

*mode switch button, for the current control mode, you can switch M + key which

is specified mode (color) in the table.

4. This button have 2 functions :

*Mode - choice key,when current control pattern is pulley pattern (color), if must

realize the pattern (color)in the controller, can press this key.

*mode switch button,For the current control mode, you can switch M + key which

is specified mode (color) in the table.

5. The output brightness control key,every time you press this button, the brightness series

add 1, altogether 32 levels.

6. The output brightness control key,every time you press this button, the brightness series

minus 1, altogether 32 levels.

7. The output speed control key,every time you press this button, the brightness series

add 1, altogether 99 levels.

8. The output speed control key,every time you press this button, the brightness series

minus 1, altogether 99 levels.

9. Color pulley touch button, static mode choose button, up to 55 touch points.

this button have 2 functions:

*static color choose button, when current control mode is the mode of M

key(color), if you want to realize static color ,can press this button.

*pulley color choose button, can choose from 55 kinds of static mode

(the color from pulley).

2. Power supply management: stop to use the remote more than 20s, the remote will enter the

standby state (untouchable state), to extend the battery life; slightly shake once, then the

remote will come back to the normal working state (touchable state).

Notice : This remote control only can change the pattern, the brightness, the speed, if you want to change the controller IC model, the IC support point, the RGB sequency, then must connect WIFI through cell phone to change.

Connect single signal line strip condition

Connect double signal line strip condition

Leynew Factory

Certification