Industrial 20Tons Ice Maker Plant Price Crystal Tube Ice Making Machine

FOCUSUN Tube ice machine-Electronic components

(1) Our Focusun tube ice machine adopts the integrated design, compact structure, easy installation and use;
(2) PLC is siemens brand man-machine interface computer module, ice making and ice automatically switches off, save time and energy for customer.
(3)All equipment using CAD, 3D simulation assembly, arrangement of equipment parts and accessories, pipe to more
reasonable,compact structure and not crowded, operation, maintenance more human;
(4)According to different working condition of customized, Ice tube maker can be made-to-order.

FOCUSUN Tube ice machine-Water cooled condenser

(1)Tube ice machine works on a cycle shift, for example 15 minutes ice making and 2 minutes ice harvesting per cycle based on external diameter of 29mm specification ice tube;
(2)The internal diameter of tube ice can be adjusted according to ice making time;
(3)The tube ice machine evaporator employs SUS304 material and the heat exchange tube is designed at the most optimized thickness, combined with specialized heat treatment processing technology, which makes the best use of heat conductibility.

FOCUSUN Tube ice machine-Cooling tower

Cooling capability of water-cooled condenser:

It is decided by the ambient temperature. The ambient temperature is higher, the condensing temperature is higher. In general, when using water-cooled condenser, the condensing temperature is about 5~7℃ higher than ambient temperature.

The condensing temperature limit of general refrigeration system: (20℃ ~ 55℃)

Within normal circumstances, the area whose ambient temperature exceeds 42℃ usually is not suggested using air-cooled condenser. So whether choosing water-cooled condenser or not, we should affirm the ambient temperature at first.

When we design water-cooled ice machine, we need customers to offer the data about the highest dry-bulb temperature of local environment. When ambient temperature exceeds 50℃, water-cooled condenser can’t be used because cooling tower is easy to be destroyed by high temperature. The cooling tower must be used in the case of sun protection.

FOCUSUNTube ice machine-Evaporator

(1) The tube ice maker evaporator using high quality stainless steel 304 and other materials processing, meet international health standards;

(2) we can do the OEM and follow you requirements for the brand logo.

Focusun tube ice: Revolutionizing the Commercial Ice-Making Industry

FOCUSUN invented the first automatic sized Tube-Ice Machine and containerized ice machine. Prior to this industry changing event, ice products were originally made in block form. Ingenious FOCUSUN engineers designed the unique Tube- Ice Machine specifically to freeze ice automatically in vertical tubes, momentarily thaw ice from the tubes, and then cut it into short cylinders with a hole in the center. The hole is formed during the formation of the ice as a result of the falling film of water freezing inside the vertical tubes.

Ice Making Principle of tube ice making machine:

As shown, when the refrigeration system begins operating normally, the water in the tank below is transported from the water outlet to the water inlet of upper water tank by the water pump. After the water goes across the distributive pipe, it downwardly flows along the wall of the heat exchange tube. The water then begins a heat exchange with the refrigerant outside heat exchange pipe, which lowers the temperature. Some of the water is formed into tube ice, while the water which does not become ice returns to the low water tank. The water continues circulating so that the ice gets thick, and the hole of tube ice also becomes smaller and smaller.

After a period of time, water stops circulating and the refrigeration system changes into ice cutting mode. The ice cutting framework then begins to operate. The surface of the heat exchange pipe consists of refrigerant hot gas with high-pressure. The hot gas begins a heat exchange with the tube ice in the pipe wall. Hot gas makes contact between the tube ice and the wall of heat exchange, thawing the ice so that it looses adhesive force. The ice then drops into an ice cutting framework because of gravitational force and finally is cut into many pieces of tube ice.

Key Part EVAPORATOR Production pictures of Focusun tube ice machine:

(1)Use one 40ft container for 15tons, use 2 x 40ft container for 30tons
(2)Focusun FIT-150WS (15ton per day) tube ice machine has three parts: tube ice machine compressor unit, evaporator unit and evaporative cooling condenser unit
(3) Focusun professional package team will package and protect the machine well in container, our customer will be happy to see our good package way.

Recommended other Focusun products

1. Focusun Industrial ice machines:

(1) Tube ice machine: From 1ton/day to 60ton/day

(2) Direct system block ice machine: From 1ton/day to 30ton/day

(3) Brine system block ice machine: From 1ton/day to 100ton/24hours

(4) Flake ice machine: From 1ton/24hours to 60tons/24hours

(5) Plate ice machine: From 1ton/24hours to 40tons/24hours

(6) Industrial snow ice machine:1ton/24hours to 60ton/24hours