- Product Details
- {{item.text}}
Quick Details
-
Application:
-
Artificial Grass Installation And Maintenance
-
Brush Width:
-
800mm
-
Power:
-
1.2kw/7400rpm, 1.8nm/5500rpm(Gasoline)
-
Rate:
-
200rpm
-
Weight:
-
10kg
-
Delivery Port:
-
Shanghai port
-
Model:
-
hg-13
-
warranty:
-
1year
-
origin:
-
china
-
Quality:
-
Brand new
Quick Details
-
Place of Origin:
-
Shanghai, China
-
Brand Name:
-
hongang
-
Weight (KG):
-
10
-
Application:
-
Artificial Grass Installation And Maintenance
-
Brush Width:
-
800mm
-
Power:
-
1.2kw/7400rpm, 1.8nm/5500rpm(Gasoline)
-
Rate:
-
200rpm
-
Weight:
-
10kg
-
Delivery Port:
-
Shanghai port
-
Model:
-
hg-13
-
warranty:
-
1year
-
origin:
-
china
-
Quality:
-
Brand new
Product Description
Product introduction:
The machine is driven by gasoline engine nylon brush work, hand carding, mechanical flexibility.It can effectively clean and maintain artificial turf, football fields, tennis courts, golf courses and other sports venues paved with artificial turf.
Structure(packing list)
1.engine
2.
Connecting plate
3.
Operating handle
4.
Watch strap buckle
5.D-type front handle
6.
quick coupler
|
Product Name
|
Hot Sale Hand-pushed Lawn Comber Brush Machine For Artificial Grass
|
|
Application
|
Artificial Grass Installation And Maintenance
|
|
Brush Width
|
800mm
|
|
Power
|
1.2kw/7400rpm, 1.8nm/5500rpm(Gasoline)
|
|
Rate
|
200rpm
|
|
Weight
|
13kg
|
|
Delivery Port
|
Shanghai port
|
* Sweeping machine installation
1. Protective cover
2. Brush driven rod
3. Brush driven shaft
4. Loosen the two setscrews and carefully insert the drive rod into the appropriate position from the concave side of the protective cover.
5. Connect the brush head following by the brush installation steps.
6. Tip: The protective cover plays a partial protection role, wihich is designated to protect operator’s safety and avoid harm caused by rising sand, bouncing gravel and dust during operation. Protective cover can be installed based on user’s need.
1. Sweeping Brush
2. Brush driven rod
3. Brush driven shaft (position A)
4. To connect 2 to 1:
1. Insert 3 into 1 spline slot
2. Insert 2 into the bottom
1. Insert the driven rod to the bottom of the brush
2. Remove the setscrew and turn the driven rod to make the position hole overlap with the setscrew hole, then put the setscrew back and tighten it.
3. Tighten the fixing bolts
Title goes here.
1. Facing the positioning hole upwards and instert into the quick connector.
2. Loosen the quick connector knob
Title goes here.
1. Quick connector knob
2. Locating pin cover
3. Locating pin
4. After inserting the drive rod, turn it gently and confirm that the locating pin is inserted into the positioning hole
5. Press the locating pin cover and tighten the quick connector knob
6. To disassemble: Loosen the quick connector knob, press the pin, gently turn the drive rod and pull it out.
Title goes here.
The assembly of the operating rod is completed
Tighten the fixing bolts on the protective cover
The recommended distance between the protective cover and the brush is between 25-35cm.
The assembly of brush part is completed.
1. As shown in the picture, the fixing hole of the quick connector of drive rod is positioned upwards.
2. As shown, the tongue of the protective cover is facing upwards
1
. Engine
2. Connection plate
3. Operating handle
4. strap buckle
5. D-type front handle
6. Quick connector
Related Products
Packing&Shipping
Packaging: wooden case for machine or as customer's requirements.
Shipping: within 3 days after received the deposit for machine.
Certifications
Our Service
Pre-sale Service
1. Supply item design, process design.
2. Help you to chose the fit machine.
3. Making the machine according to your requirement.
Sale Service
1. Acceptance equipment together with you.
2. Help you to make the method statement and the details of the process .
After Service
1. Guarantee for a year.
2. Quality problem, we will send you the accessories.
3. Free repair whole using life(without the freight and accessories charge).
Company Introduction
Shanghai Hongang Machinery Manufacturing Co., Ltd is a new branch of Shandong Jining Qingke Machinery Co., Ltd. Our new company is located in SHANGHAI,CHINA.
Our new company is established in July 29, 2015, registered capital of 5 million.
We are a manufacturer and specialize in this market for 10 years.
Our own factory is located in Jining city, SHANDONG province. We have CNC machining center, CNC
lathe, boring machine, and milling machine.
Main products: GQ60 reinforcing steel bar shearing machine , Bending machines, Straightening machines, Steel arc bending machine, Ground polishing machines, Terrazzo machines, Solar water pump, Garden Machinery(including tree spade & lawn mower), Construction machinery and accessories, Road marking and Mining equipment, Mining tools and so on.
We have passed the ISO9001:2000 certification. Our products have been exported to Europe, Russia, south America, Africa & the Middle East, more than 20 countries. We sincerely hope to have the opportunity to co-operate with you.
Our Factory
Our Partner
Our Group
FAQ
1)Are you manufacture?
Yes. We are one of leading manufacturers
2)Do you have Stock productions to sell?
Yes, of course. But we also offer OEM service. Please send us some drawing.
3)What information do you want to know if i want to get a quotation?
a). The model/size of your products.
b). The application for your products.
c). Special package methods if you needs.
d). Raw material.
4)Do you inspect the finished products?
Yes.Each step of products will be carried out inspection by QC department until shipping
5)What advantages do you have?
(1) Punctual: Have your orders met with the latest delivery?
We are a manufacturer with so many advanced and new machines.
It ensures we have the ability to carry out the production schedual for punctual delivery.
(2) 20year production experience. We have over 20 years exprerience in this industry.
That means we can preview the problems for the orders and production.
Therefore, it will make sure to deduce the risk of bad situation to happen.
(3) Point to point service.
Are you manufacture?
Yes. We are one of leading manufacturers
6)Do you have Stock productions to sell?
Yes, of course. But we also offer OEM service. Please send us some drawing.
7)What information do you want to know if i want to get a quotation?
a). The model/size of your products.
b). The application for your products.
c). Special package methods if you needs.
d). Raw material.
8)Do you inspect the finished products?
Yes.Each step of products will be carried out inspection by QC department until shipping
9)What advantages do you have?
(1) Punctual: Have your orders met with the latest delivery?
We are a manufacturer with so many advanced and new machines.
It ensures we have the ability to carry out the production schedual for punctual delivery.
(2) 20year production experience. We have over 20 years exprerience in this industry.
That means we can preview the problems for the orders and production.
Therefore, it will make sure to deduce the risk of bad situation to happen.
(3) Point to point service.
There is two sales departments who will serve you from inquiry to products shipped out. During the process, you just need to discuss with him for all the problems and the way sames much times.
We also have professional technology team to answer your doubts for the further step and provide technology support.
Contact
Sales Manager: Wendy Tang
Website: www.havemachine.com
Fax: 86-537-2610909
Tel/Whatsapp/Wechat: +8613162658786
Website: www.havemachine.com
Fax: 86-537-2610909
Tel/Whatsapp/Wechat: +8613162658786
Hot Searches
