- Product Details
- {{item.text}}
Quick Details
-
EINECS No.:
-
203-080-7
-
Place of Origin:
-
Hunan, China
-
Brand Name:
-
Magpow
-
Model Number:
-
MPD113
-
Type:
-
Solvent
-
Commodity:
-
Contact Cement
-
Appearance:
-
Light yellow thick liquid
-
Main Material:
-
Neoprene Liquid Glue
-
Viscosity:
-
1500-2500(25 centigrade,mPa.S)
-
Stock:
-
Full
-
Custom tailor:
-
can accept customer's brand and design
-
Brand:
-
Magpow
-
Package:
-
18L/tin,1tin/ctn
-
Application:
-
Construction, Fiber & Garment, Footwear & Leather, Packing
-
Item name:
-
neoprene contact adhesive for sofa
Quick Details
-
CAS No.:
-
24937-78-8
-
Other Names:
-
Cement contact
-
MF:
-
MSiO2 NH2O
-
EINECS No.:
-
203-080-7
-
Place of Origin:
-
Hunan, China
-
Brand Name:
-
Magpow
-
Model Number:
-
MPD113
-
Type:
-
Solvent
-
Commodity:
-
Contact Cement
-
Appearance:
-
Light yellow thick liquid
-
Main Material:
-
Neoprene Liquid Glue
-
Viscosity:
-
1500-2500(25 centigrade,mPa.S)
-
Stock:
-
Full
-
Custom tailor:
-
can accept customer's brand and design
-
Brand:
-
Magpow
-
Package:
-
18L/tin,1tin/ctn
-
Application:
-
Construction, Fiber & Garment, Footwear & Leather, Packing
-
Item name:
-
neoprene contact adhesive for sofa
18L/tin Light Yellow Solvent Leather Shoe Glue
MPD113 Cement Contact Gum
Item: MPD113
Specifiction: 18L/tin,1tin/ctn
Meas: 25*25*39.5cm
Specifiction: 18L/tin,1tin/ctn
Meas: 25*25*39.5cm
Product Description
Application:
This product is mainly used in the daily repair. Such as repair of leather,rubber,wood,fabric,paper etc.
Applied to interior decoration, automotive interiors decoration, furniture and other industries. Also Adhesive to wood, MDF, fire board,aluminum composite panel, leather, rubber, fabric,paper and other materials.
Applied to interior decoration, automotive interiors decoration, furniture and other industries. Also Adhesive to wood, MDF, fire board,aluminum composite panel, leather, rubber, fabric,paper and other materials.
Using Method
1.Adhesion surface should be oil decontamination and smooth,clean,dry.
2.Use scraper or brush with sticky material in the glue evenly on both sides if a large area bonding, it is proposed that coating
the two adhesive surface at the same time.
3.Let it dry at room temperature 5-15 minutes, when the glue is not so sticky then drawing a one-time at the bonding, extrusion
from the inside out to remove air bubbles,percussion compaction,it reach use strength after 24 hours.
2.Use scraper or brush with sticky material in the glue evenly on both sides if a large area bonding, it is proposed that coating
the two adhesive surface at the same time.
3.Let it dry at room temperature 5-15 minutes, when the glue is not so sticky then drawing a one-time at the bonding, extrusion
from the inside out to remove air bubbles,percussion compaction,it reach use strength after 24 hours.
Hot Selling Products
Hot Searches
