Plastic lightweight concrete panels form pp hollow plastic formwork board

Thickness:  12-22mm     customized UV and flame retardant

Cutting and customized size are available.

1. Light weight, high strength, high hardness, impact resistance, wear resistance.

2. Surface is smooth, bright and clean; c oncreting and forming effect is good.

3. No absorption of moisture, no deformation, no mildew; Long-term immersion stratification in the water, no bubbles, sheet size stability, especially suitable for underground and damp environment.

4. Good toughness. It could be used as cambered special-shaped formwork.

5. Acid and alkali resistance, corrosion resistance; Very suitable for the engineeringapplication in

coastal areas, mine, as well as seawall. It is need not do any preservative treatment both in using and storing the formwork, which do not pollute the concrete surface.

6. The reusable time can reach more than 6 0 times, long service life.

7. Waste products can be recycled and reprocessed, making full use of waste materials . This property can greatly reduce the project cost compared with wooden formwork and bamboo formwork.

8. Environmental protection and energy saving, no pollution. No any poisonous or harmful gas.

9. Demould easily. No need brushing release agent, only tapping, the formwork will fall off. Shorten working hours and speed up the construction schedule efficiently.

10. Easy to process. Sawing, drilling and nailing are all available. Formworks can be combined vertically and horizontally optionally.

11. Easy to remove. Removing is convenient, quick and safe, and the supporting is also easy to operate, advantageous to the organization construction, effectively improving the construction schedule.

Beizhu plastic formwork has been accepted and applied in construction in China, Turkey, Canada, Australia, Singapore, Finland and other more than 30 countries. We have got the positive feedback for its durability  and easy operation . This new construction material will be popular and used widely all over the world.

General Operation And Notes Of Instrument For Beizhu plastic formwork :

• Method of use as well as wooden formwork,  plastic formwork reinforcement direction with batten direction placed in cross shaped.
• No need to smear the mold release agent before using formworks.
• When cast-in-place the flat plate, spacing between the keels should be 20 ~ 25 cm, and the spacing between the wall plate and keels hould be 10 ~ 20 cm.BEIZHU GROUP pp formwork no need releasing agent lightweight concrete panels best formwork as world.
• The seam-line between plastic formwork should be taped.
• The length of nail should not be too long, generally about 30 ~ 35 mm.
• The strength to drive nailsshould be moderate.
• When removing the formwork, please start from the small part of one end, the support and the plates should be removed at the same time aiming at preventing the template widespread drops, don't let the corner drop on the ground vertically.
• The plastic formwork accesses to be mixed used with wood veneer, bamboo veneer and other material plate.