- Product Details
- {{item.text}}
Quick Details
-
EINECS No.:
-
GU-500SD-400
-
Place of Origin:
-
Taiwan, China
-
Brand Name:
-
Good Use
-
Model Number:
-
GU-500SD
-
Type:
-
epoxy based anchoring system
-
Item No:
-
GU-500SD
-
Mixing ratio:
-
3:1
-
Setting time:
-
Slow curing
-
Shelf life:
-
18 months
-
Mixing color:
-
Orange
-
Available capacity:
-
400/585ml
-
Applications:
-
For structural steel to concrete connections
-
Feature:
-
Non sagging and suitable for vertical applications
-
Brand:
-
Good Use or customized
-
Advantage:
-
Anchoring without expansion pressure
Quick Details
-
CAS No.:
-
Mixcure
-
Other Names:
-
Epoxy grouts
-
MF:
-
Mixture
-
EINECS No.:
-
GU-500SD-400
-
Place of Origin:
-
Taiwan, China
-
Brand Name:
-
Good Use
-
Model Number:
-
GU-500SD
-
Type:
-
epoxy based anchoring system
-
Item No:
-
GU-500SD
-
Mixing ratio:
-
3:1
-
Setting time:
-
Slow curing
-
Shelf life:
-
18 months
-
Mixing color:
-
Orange
-
Available capacity:
-
400/585ml
-
Applications:
-
For structural steel to concrete connections
-
Feature:
-
Non sagging and suitable for vertical applications
-
Brand:
-
Good Use or customized
-
Advantage:
-
Anchoring without expansion pressure
Strong adhesion two component 400ml injection epoxy mortar
| PRODUCT NAME | Strong adhesion two component 400ml injection epoxy mortar |
| ITEM NO. |
GU-500SD |
| CAPACITY |
400ML(3:1) |
| GU-500SD 400ML is strongest in all chemical anchoring. Remarkable at cold weather, cracked concrete and water saturated holes. Ultimate performance for rebar connections, heavy anchoring on dry concrete, wet concrete, cracked and uncracked concrete. Advanced-formula pure epoxy adhesive is workable at wide temperature and crucial anchoring. Quality tested and approved by Germany lab. Non-sag allows for overhead and suspended ceiling application. There is also 585ml available in the range | |
Curing Time Table
| Temperature (C) | Gelling Time | Full Curing Time |
| 5~9 | 2 hr | 90 hr |
| 10~14 | 90 min | 64 hr |
| 15~19 | 45 min | 28 hr |
| 20~29 | 30 min | 18 hr |
| 30~39 | 20 min | 7 hr |
| 40 | 12 min | 5 hr |
After fully cured, wait for 24 hours before doing the pull out test. Kindly note the mortar must be conditioned at minimum of 15 degrees.
Hot Searches
