- Product Details
- {{item.text}}
Quick Details
-
MAWP:
-
4bar
-
VESSEL DESIGN TEMP.:
-
-40℃ to 130℃.
-
CLASSIFICATION:
-
Bureau Veritas or LR
-
DESIGN CODE:
-
ASME Div 1 where applicable.
-
MATERIAL:
-
SA516 Gr 70 Carbon steel .
-
SAFETY RELIEF VALVE:
-
3" flanged 4.4 bar
-
MANLID:
-
1 x stainless steel, 500mm
-
TOP DISCHARGE PROVISION:
-
1 x 3" recessed tank pad
-
AIR INLET:
-
1.5" ball valve
Quick Details
-
Type:
-
Tank Container
-
Place of Origin:
-
Jiangsu, China
-
Standard:
-
T11 IMDG, US DOT C
-
MAWP:
-
4bar
-
VESSEL DESIGN TEMP.:
-
-40℃ to 130℃.
-
CLASSIFICATION:
-
Bureau Veritas or LR
-
DESIGN CODE:
-
ASME Div 1 where applicable.
-
MATERIAL:
-
SA516 Gr 70 Carbon steel .
-
SAFETY RELIEF VALVE:
-
3" flanged 4.4 bar
-
MANLID:
-
1 x stainless steel, 500mm
-
TOP DISCHARGE PROVISION:
-
1 x 3" recessed tank pad
-
AIR INLET:
-
1.5" ball valve
Packaging & Shipping
1.0DESIGN SPECIFICATION
TANK TYPE : 20ft ISO universal Collar (set out) tank.
CAPACITY : 25,000 litres -1 +1.5%.
TARE : 5,360 kg±3%
MAX GROSS : 36,000 kg.
PRODUCTS : General purpose liquids.
MAWP : 4 bar.
TEST PRESSURE : 6 bar.
EXTERNAL PRESSURE : 0.41 bar.
VESSEL DESIGN TEMP. : -40℃ to 130℃.
TYPE APPROVALS : UN portable tank (T11 IMDG, US DOT CFR49,
ADR/RID), UIC, TIR, CSC, TC.
CLASSIFICATION : Bureau Veritas or Lloyd’s Register
2.0VESSEL
DESIGN CODE : ASMEDiv 1 where applicable.
MATERIAL : Shell Material:
SA516 Gr 70 Carbon steel .Shell 8mm
Include corrosion allowance: 1.0mm
Ends Material:
SA516 Gr 70 Carbon steel. Shell 10mm (before forming).
Include corrosion allowance: 1.0mm
SURFACE POLISH : Base 400 mm of circumferential seams ground flush. Fillet
welds on tank fitting ground smooth where necessary.
3.0FRAME
TYPE : ISO 1496/3 (1CC) without saddles.
MATERIAL : SPA-H or equivalent.
WALKWAY : 475mm wide non-slip marine resistant grade aluminium.
One longitudinal sections full length, transverse section
Please note: This file is strictly confidential and privileged. It is intended only for the use of the intended
recipient. If you are not the intended recipient, please notify us (CIMC NANTONG) immediately. You should
not copy it, forward it or use it for any purpose or disclose the contents to any person.
4 / 6
at rear end frame, short transverse section adjacent to rear of manway box. The nutswhere is on the cross of each walkway are to be tack welded.
Our Services
The containers specified herein are manufactured under sufficient quality control, which will be approved by one of following authorized agency.
ASME, IMDG, ADR, CSC, ISO
Hot Searches
