Stainless Steel Tomato Paste Processing Machine Mango Pulper Fruit Puree Vegetable Pulp Making Machine

This machine is mainly used to squeeze fruit and vegetable juice.
The equipment consists of a frame,a feeding hopper,a front support,a screw,a skeleton,a screen, a rear support,and a hand wheel bearing housing.
The main component of the spiral juice is a spiral.The diameter of the spiral gradually increases along the direction of the slag outlet and the pitch gradually decreases.When the material is propelled by the spiral,the volume of the spiral cavity is reduced to form a pressing of the material.The direction of rotation of the spiral main shaft is viewed from the feed hopper towar d the slag groove in a clockwise direction. The raw material is added to the feed hopper,pressed under the advancement of the spiral, and the pressed juice flows through the filter into the bottom of the juicer,and the waste is discharged through the annular gap formed between the spiral and the tapered portion of the pressure regulation.The movement of the pressure regulating head in the axial direction can adjust the size of the gap and adjust the juice rate.

I.Use and scope of application

For pressing pineapple, apple, pear and other fruits; For pressing mulberry, grape, orange, orange and other berries; For pressing tomatoes, ginger, garlic, celery and other vegetables. Spiral push extrusion;Fully automatic berry, pome fruit and vegetable fruit and vegetable juice extraction and slagging process;Contact with the material is made of national standard 304 stainless steel. The frame material can be selected from the national standard 304 stainless steel, depending on customer requirements.

2.equipment structure,working principle

1.Structure: It consists of front support, feed hopper, crushing, spiral,filter net,juicer,rear support,slag sump, etc.The left end of the spiral main shaft is supported in the rolling bearing housing, and the right end is supported by the hand wheel bearing. In the seat, the motor is driven by a pair of V-belt drive screws.

2.Working principle: The main component of the device is that the spiral diameter gradually increases along the direction of the slag outlet and the pitch gradually decreases. When the material is spirally advanced, the material is squeezed due to the reduction of the volume of the spiral cavity. The direction of rotation of the helical main shaft is viewed from the feed hopper toward the slag groove in a clockwise direction. The raw material is added to the feed hopper, pressed under the advancement of the spiral, and the pressed juice flows through the filter into the bottom of the juicer, and the waste is discharged through the annular gap formed between the spiral and the tapered portion of the pressure regulation. The movement of the pressure regulating head in the axial direction can adjust the size of the gap. For clockwise (when the seat is turned from the slag tap of the device to the end of the feed hopper, when the seat is turned, the pressure head is turned to the left, the gap is reduced, and the gap is enlarged.) The size of the gap is changed, that is, the row is adjusted. The resistance of the slag. The slag removal rate can be changed, but if the void is too small, under strong extrusion, some of the slag particles will be extruded through the filter together with the juice. Although the juice is increased, the quality of the juice is relatively decreased, and the size of the void should be regarded as User specific process requirements.
Stainless steel spiral fruit and vegetable juicer is suitable for a variety of fresh fruit and vegetable beating separation. Products such as: orange, grape, kiwi, mulberry, bayberry, peach (nuclear), etc., to achieve jam juice, separate the core, fruit seeds, thin skin, can also be green vegetables (cut) Tomato, pepper, celery (cut) and other vegetable juices are obtained, and vegetable gluten is separated. It is an ideal machine for making jam, juice and vegetable juice, and is an important equipment for food processing enterprises. The motor drives the spindle to rotate through a pair of pulleys.The tripod is mounted on the spindle. The beater plate is on the tripod.The screen, funnel and slag are mounted on the lower bracket. The upper inner tube and the feeding hopper are loaded on the bracket, and the entire upper bracket is hingedly connected, and can be opened to check the quality of the pulp.

3.preparation before use
1.Stabilize the machine on the foundation and tighten the screws on the chassis feet;
2.Open the cylinder, clean up the debris, clean it, and prevent water from leaking to the motor during cleaning;
3.Adjust the gap between the scraper and the inner wall of the screen to be 1.5~2mm;
4.Adjust the spiral angle of the scraper;
5.whether the spindle is flexible by hand, cover the upper cylinder tightening screw;
6.Before feeding, the skin of the thick skin should be peeled. Such as: orange, large nuclear fruit to go nuclear, such as: peaches, long vegetables to cut, garlic dishes to cut, big peppers to cut open, and all must be fresh.
7.The fruits and vegetables to be processed must be cleaned.
8.Turn on the power. Start the motor, test the beater, check whether the spiral direction of the spindle is correct, whether the sound is normal, and so on.

Parameters