- Product Details
- {{item.text}}
Quick Details
-
EINECS No.:
-
203-632-7
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
Kafuter
-
Model Number:
-
K-5905-45g
-
Type:
-
Adhesive sealant
-
Appearance:
-
transparent paste
-
Initial cure time:
-
3~10 min
-
Application:
-
bonding/sealing
-
Fields:
-
LED fence protect tube/car maintenances,LED circuit board
-
Packing:
-
45g/tube,100 tube/case
Quick Details
-
CAS No.:
-
63394-02-5
-
Other Names:
-
Kafuter k-5905
-
MF:
-
SiO2
-
EINECS No.:
-
203-632-7
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
Kafuter
-
Model Number:
-
K-5905-45g
-
Type:
-
Adhesive sealant
-
Appearance:
-
transparent paste
-
Initial cure time:
-
3~10 min
-
Application:
-
bonding/sealing
-
Fields:
-
LED fence protect tube/car maintenances,LED circuit board
-
Packing:
-
45g/tube,100 tube/case
Products Description
LED Kafuter K-5905 Tubes for Silicone Sealant (Sealing in Ourdoor Lights,Fence Protect Tube,Car Lights)
Features
1.One-part,fast cure silicone adhesive sealant.
2. No solvents, corrosion, and pollution
3. Have excellent performance in moisture-proof, aging-resistance, electric insulation, and hot and cold temperature tolerance
4.Good adhesion to metals, glass, wooden, and other plastics
5.Excellent resistance to cold and hot AC performance (-50~250°c)
Features
1.One-part,fast cure silicone adhesive sealant.
2. No solvents, corrosion, and pollution
3. Have excellent performance in moisture-proof, aging-resistance, electric insulation, and hot and cold temperature tolerance
4.Good adhesion to metals, glass, wooden, and other plastics
5.Excellent resistance to cold and hot AC performance (-50~250°c)
Application
(1) Bonding and waterproof sealing in LED fence protect tubes(Guardrail tube), LED surface lights and other lightings
(2) Bonding and sealing engineering-plastics, metal , glass, ceramics.
(3) Positioning, reinforcing, and moisture proof sealing electronic components in circuit board.
(4) Also, can bond in bumpers, hangers, and mirrors, seal in car lights, rear-view mirrors, and shower heads.
(1) Bonding and waterproof sealing in LED fence protect tubes(Guardrail tube), LED surface lights and other lightings
(2) Bonding and sealing engineering-plastics, metal , glass, ceramics.
(3) Positioning, reinforcing, and moisture proof sealing electronic components in circuit board.
(4) Also, can bond in bumpers, hangers, and mirrors, seal in car lights, rear-view mirrors, and shower heads.
Usage method
1. Must be glued or coated with the surface clean, remove rust, dust and oil etc.
2. The first set on the mouth, and then cut into the size of the rubber mouth. Then glue onto the surface has been cleaned, the uniform distribution will be the sticky surface can be folded and fixed.
3. The bonded parts are placed open and room temperature curing can be put into use after 24 hours.
ATTENTION
1.It can be cured with moist air, and in a large area of the occasion may take a long time.
2.After the operation of the bonding process is completed, the rubber should be tightened immediately after the operation is finished. If the seal has a little crust, remove it.
3.Avoid contact with eyes, skin and clothing. Wash immediately with soap and water after contact with skin. If you accidentally splashed into the eyes, rinse immediately with plenty of water, and medical
2. The first set on the mouth, and then cut into the size of the rubber mouth. Then glue onto the surface has been cleaned, the uniform distribution will be the sticky surface can be folded and fixed.
3. The bonded parts are placed open and room temperature curing can be put into use after 24 hours.
ATTENTION
1.It can be cured with moist air, and in a large area of the occasion may take a long time.
2.After the operation of the bonding process is completed, the rubber should be tightened immediately after the operation is finished. If the seal has a little crust, remove it.
3.Avoid contact with eyes, skin and clothing. Wash immediately with soap and water after contact with skin. If you accidentally splashed into the eyes, rinse immediately with plenty of water, and medical
treatment.
4.The use of glue dispensing machine. The end of the job should be immersed in the container dispensing needle containing silicone oil to prevent clogging of curing head.
PACKAGING
45g/tube, 300ml/tube, or according to customer's request
STORAGE
Product shall be ideally stored in a cool and dry place.
Shelf life under 30 degrees Celsius: 300ml/tube for 9 months, 45g/tube for 12 months
4.The use of glue dispensing machine. The end of the job should be immersed in the container dispensing needle containing silicone oil to prevent clogging of curing head.
PACKAGING
45g/tube, 300ml/tube, or according to customer's request
STORAGE
Product shall be ideally stored in a cool and dry place.
Shelf life under 30 degrees Celsius: 300ml/tube for 9 months, 45g/tube for 12 months
Applied Range
Hot Products
About Us
Logistic Transport
FAQ
Q: Can I buy samples placing orders?
A: Yes.Please feel free to contact us. The sample is free, you only need to pay the shipping cost.
Q: Can you provide OEM service?
A: Yes, we can produce under your own brand name. Logo and packing design need to be provided so as to make customized brand name.
Q: What is your payment term?
A: T/T, Western Union, L/C and Paypal. This is negotiable.
Q: What is the shipping method?
A: It could be shipped by sea, by air or by express(EMS, UPS, DHL, TNT, FEDEX and ect).Please confirm with us before placing orders.
Q: What other products do you have?
A: In addition to our main products are UV glue and silicone sealant, epoxy resin AB glue, we also have many other products, such as acrylic acid AB glue, anaerobic glue, instant dry glue, Ms glue, polyurethane glue and other thousands of high-performance adhesives.
|
|
Hot Searches
