- Product Details
- {{item.text}}
Quick Details
-
Place of Origin:
-
Taiwan, China
-
Battery Type::
-
GEL,AGM,Deep Cycle,Calcium Batteries
-
Efficency:
-
>87%(at full load)
-
Battery Reverse:
-
Yes,by fuse burnt
-
Short-Circuit:
-
Yes,Automatic Shutdown
-
Overload:
-
Yes,Current Limited
-
Power Supply:
-
13.7V 5A (Max)
-
Cooling:
-
Speed controlled by charging stage
-
Dimensions(mm):
-
208*93*64
-
Weight(KGS):
-
0.9
-
Safety & CE:
-
LVD:EN60335-1 & EN60335-2-29
Quick Details
-
Type:
-
Electric
-
Port:
-
AC
-
Function:
-
Low Ripple DC
-
Place of Origin:
-
Taiwan, China
-
Battery Type::
-
GEL,AGM,Deep Cycle,Calcium Batteries
-
Efficency:
-
>87%(at full load)
-
Battery Reverse:
-
Yes,by fuse burnt
-
Short-Circuit:
-
Yes,Automatic Shutdown
-
Overload:
-
Yes,Current Limited
-
Power Supply:
-
13.7V 5A (Max)
-
Cooling:
-
Speed controlled by charging stage
-
Dimensions(mm):
-
208*93*64
-
Weight(KGS):
-
0.9
-
Safety & CE:
-
LVD:EN60335-1 & EN60335-2-29
Features
* Unique and multifunctional LCD display
* Low power mode to charge smaller batteries.
* 8 steps (4 steps for LiFEPO4/ Li-ion) smart charge algorithm.
* AGM/ GEL/ LiFEPO4/ Li-ion/ Power supply mode.
* Batteries life enhancing features.
* The charger will save the last usage charging mode after power off. You do not need to reset it if the next time you charge the battery of the same specification.
* There is no output voltage till the charger connects to the battery (exclusive SUPPLY mode).
* The charger transfers to the charging mode after Repair mode.
* The charger will stop charging if the timer time is up. You need to reset (turn off- turn on) the charger if you need to charge again.
* Smart temperature control design to control the inside temperature under 100 degree C for safety purpose.
.
|
Model No. |
IBC-1208M8 |
|
|
Charging Battery Type |
8-Stage (GEL/ AGM/ LiFEPO4/ Li-ion/ Li-PO) |
|
|
Input |
Voltage |
100-120Vac or 200-240Vac |
|
Frequency |
47~63HZ |
|
|
Output |
Voltage |
12V |
|
Current (Max.) |
2A,4A,8A (Selectable) |
|
|
Efficiency |
87% |
|
|
Min. Battery Voltage |
>8V |
|
|
Charging Cycle
|
Total Charging Timer |
Off (pre-set) Timer can be set through the LCD panel |
|
Temperature Compensation |
Snow Mode can increase 0.2V charging voltage |
|
|
Pulse / Desulphation (1) |
14.6V ( if battery <10V) except for Li-ion & LiFEPO4 |
|
|
Soft Start (2) |
4Amp until 12V |
|
|
Bulk (3) |
8Amp until 14.4V (AGM) 14.2V (GEL) 14.6V (LiFEPO4) 16.8V (LI-ION/ LI-PO) |
|
|
Absorption (4) |
Increasing voltage to 14.6V 0.8A |
|
|
Analysis (5) @1min. |
Go to next if battery >12V; go to fault if battery <12V |
|
|
Recondition (6) @1 hour |
4Amp until 15.4V (AGM) or 15.0V (GEL) |
|
|
Float (7) (AGM/GEL only) |
13.8V (AGM) or 13.6V (GEL) 0.4A (max.) ; Stop charging if <0.1A |
|
|
Maintain (8) |
13.8V 4A to charge battery if battery <12.5V (AGM) 13.6V 4A to charge battery if battery <12.5V (GEL) 14.6V 8A to charge battery if battery <12.5V (LiFE) 16.8V 8A to charge battery if battery <13.0V (Li-ion) |
|
|
Battery Capacity |
8~100Ah (AGM/GEL) 4~100Ah (LiFEPO4/ Li-ion/ Li-PO) |
|
|
Environment |
0 ~ +35 ℃ , 20 ~ 80% RH |
|
|
Display |
Unique and multifunctional LCD display |
|
|
Dimensions |
208x94x63mm (L*W*H) |
|
|
Weight |
0.9Kg |
|
1.Above data was based on 25 ℃ ,the O/P current maybe different at different temperature.
2. The charger is designed for charging only for batteries according to the technical specification.
3. Specification is subject to improve without prior notice
Operations:
1. Before use, please confirm if the mains voltage is same as the specifications of the charge.
2. Connect your charger to the battery before connect the charger to a wall receptacle.
3. The charger will turn on after a few seconds, the LCD displays the standby mode, confirm the type and capacity (current) of the battery to be charged (refer to page 4)
4. Connect the battery after setting (red clip -> positive; black clip -> negative
5. the charger will automatically start charging if the battery voltage >8V, and LCD panel will show the battery level and CHARGING will flash
6. The charger will not start charging if the battery voltage is <8V. Please refer to page 9 if you still want to charge.
7. Please note that personnel cannot leave the site to observe the battery temperature status, such as if there is an abnormality, the charging must be stopped immediately
8. After the battery is fully charged, if it is not recharged, please disconnect the battery and then unplug the AC plug.
Accessories Reference
Remark: Connecting Wire and Terminal are available upon receiving customer's request.
