- Product Details
- {{item.text}}
Quick Details
-
EINECS No.:
-
201-177-9
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
Maydos
-
Model Number:
-
RP-02
-
Color:
-
White,yellow
-
Glass bead content:
-
10%, 20%
-
Port:
-
Guangzhou Huangpu
-
Application:
-
Hot melt
-
Keywords:
-
Thermoplastic marking paint
-
Certificate:
-
ISO9001
-
Substrate:
-
Cement Floor
-
Solid content:
-
75.6%
-
Density:
-
1.62 g/ cm3
-
Advantage:
-
Factory Sale
Quick Details
-
CAS No.:
-
9003-01-4
-
Other Names:
-
Road marking paint
-
MF:
-
C3H4O2
-
EINECS No.:
-
201-177-9
-
Place of Origin:
-
Guangdong, China
-
Brand Name:
-
Maydos
-
Model Number:
-
RP-02
-
Color:
-
White,yellow
-
Glass bead content:
-
10%, 20%
-
Port:
-
Guangzhou Huangpu
-
Application:
-
Hot melt
-
Keywords:
-
Thermoplastic marking paint
-
Certificate:
-
ISO9001
-
Substrate:
-
Cement Floor
-
Solid content:
-
75.6%
-
Density:
-
1.62 g/ cm3
-
Advantage:
-
Factory Sale
Description
Maydos h ot melt marking paint is currently being widely used around the world to promote the use of a new road safety marking paint.. Raw material does not contain the volatile components of the coating,, the construction of the powder coating by heating the melting,, use specialized equipment to apply on the road, forming r oad marking line
after the cooling.
Maydos hot melt marking paint is made of the petroleum resin, EVA, PE,wax, pigments and other materials . It is
powder form at normal temperature,, heated to 180 - 200 ℃ by hot - melt kettle,, while stirring 3 - 5 minutes to
be f low state, and apply to the road to form a solid coating , w ith a linear full,strong wear resistance and other
characteristics,, the construction of surface spray reflec tive beads, at night with a good reflective effect, is widely used in highways and urban roads..
Product features
1// Strong adhesion: resin content is reasonable,, add ing special rubber elastomer to primer with super - strong adhesion.. To ensure that it will not fall off when in the construction process..
2// Good a nti - cracking feature : due to temperature changes,, the hot melt marking line is easy to crack in the coating , as add ing enough EVA resin to prevent cracking..
3// Bright color:: use special color material with reasonable ratio and good
4// W eather resistance , l ong exposure outside directly and does not change color..
5// H igh coating rate:: small density,, large volume,, high coating rate .
6// Good stain resistance:: PE wax quality and dosage is the key to impact the feature of anti - fouling, EXXON PE wax is the company's first choice for many years.
Package
25kg/bag
Notice
1.It is strictly prohibited fireworks,, fire or spark splashing the location,, dangerous goods inaccessible.. Smoking,, oven,, welding or spar king electrical equipment,, etc.. are not close.. To be equipped with enough fire extinguisher (ppowder fire extinguisher)) in the emergency when the application quickly..
2. Storage after the paint, primer, thinner containers to be sealed; do not put directly o n the concrete and mud , the paint place s on the liner.. It should use rain cloth to cover i n the construction site,, so that it doesn ’ t suffer from rain y , and use it as soon as possible.. Not allow to storage in high temperature place ;
3. to avoid long - term s torage of paint.. Long - term storage is easy to make pigments precipitate,, fully stir before use the paint.. It s hould follow the principle of first use of the first storage,, otherwise it will cause oxidation of raw materials..
4.Please do not contact the ski n and other skin when carry out operation,if necessary,wear protective clothing and wear gas masks,, protective gloves, etc . Pay attention not to overflow when get solvent from the container.Spay sand If there is a spill;If the paint stick to the work c lothes,, erase away immediately.At the end of the construction,wash your hands thoroughly and rinse your mouth.
How to use
The application standards (marking thickness and reflective coefficient requirements
1.Road marking line paint application thickness: a. 1.8 ~ 2.0mm b.1.5 ~ 1.8mm c.3.0mm
Road marking application thickness requirements are generally 1.8mm; 3.0mm thickness is a special case requirements (generally very few, used in the longitudinal speed line);
2.Parking lot marking line paint application thickness: a.1.5 ~ 1.8mm b. 1.3 ~ 1.5mm Recommended in the thickness between 1.5 ~ 1.8mm; less than 1.5mm thickness, the glass beads sticky will lead to easy to fall;
3.The reflectance on the mark line depends on the glass beads of marking paint containing 10% and 20%; Glass beads containing for mark line paint - reflective type mark line paint, crossed at the same time by another sowing device sowing glass beads to get better reflective effect of higher reflection coefficient, basically applied to municipal road construction; Normal type mark line paint does not contain glass beads, only in the crossed at the same time the glass beads penetrate the standard line and produce a reflective effect on the surface through the sowing device.
Hot melt marking line application process
Melting paint (hot melt) → clean the road → mark the line →apply base oil → apply mark line paint (marking machine) → finishing → complete 3 to 5 minutes.become dry for the mark line
Projects around the world
Do you want to get more details such as TDS,MSDS ? Click here!
You have a constructional project, but you are not sure about the amount of paint. Click here!
